Abstract:In this study, Ni-based, Ni+WC and Ni+WC+Cr 3 C 2 cladding coatings (named by Ni-1, Ni-2, Ni-3, respectively) were prepared by a hybrid fabrication method combining laser cladding technology with pre-placed powders and ultrasonic impact treatment. Comparative analysis of microstructures and surface properties indicated that γ-(Fe, Ni) solid solution was the main phase in three coatings besides M 23 C 6 , W 2 C and WC carbides while ultrasonic impact treatment did not change the phase compositions of Ni-based coatings. For Ni-1 cladding coating, there existed cellular dendrites with fishbone-like precipitates at the bottom region while dendrites and equiaxed dendrites appeared at the middle and top region. In Ni-2 cladding coating, cellular dendrites and eutectic structures with flocculent characteristics were generated. By contrast, most of WC particles sank at the bottom region while polygonal Cr 3 C 2 particles distributed at the middle and top regions in Ni-3 cladding coating. After ultrasonic impact treatment, a obvious plastic deformation layer was produced in Ni-1 coating and original reticular eutectic structures are broken into particles. In Ni-2 coating, both the eutectic structures and polygonal carbides were impacted into fine ones. As for Ni-3 coating, local collapse phenomenon occurred while the existence of Cr 3 C 2 and WC particles prevented the plastic deformation of the surface layer. The maximum average microhardness (831HV 0.1 ) and the lowest weight loss were obtained in Ni-3 cladding coating. While corrosion resistance of laser cladding Ni-1 coating in 3.5 wt% NaCl solution was better than other two kinds of Ni-based composite coatings. After UIT, both the wear resistance and corrosion resistance were enhanced obviously resulting from grain refinement and dispersion strengthening.

A Comparative Study of the Microstructure, Mechanical Properties and Corrosion Resistance of Ni- or Fe- Based Composite Coatings by Laser Cladding

Study of Fe-Ni(Cr) Alloy and Nano-Al2o3 Particles Composite Coating Prepared by Laser Cladding

Mechanical and Tribological Properties of Fe- and Ni-based Coating Material under Laser Cladding Process

Microstructures and corrosion resistance of Fe-based amorphous/nanocrystalline coating fabricated by laser cladding

Surface microstructures and properties of oxide-reinforced FeCrAl matrix composite coatings prepared by laser cladding on a ferritic-martensitic steel

Comparative Study on the Microstructure, Wear Behavior, and Corrosion Performance of Iron-Based and Cobalt-Based Coatings Fabricated by Laser Cladding

Microstructure, microhardness and corrosion resistance of laser cladding Al2O3@Ni composite coating on 304 stainless steel

Fabrication of Fe-based amorphous composite coating by laser cladding

Effect of Fe content on microstructure and corrosion resistance of Ni-based alloy formed by laser cladding

Microstructure and Mechanical Properties of Ni-Based Alloy Composite Coating on Cr12MoV by Laser Cladding

Laser cladded Ni625–xCr3C2 coatings: Microstructure, tribocorrosion and electrochemical properties

Study on Microstructure and Properties of Nickel-Based Self-Lubricating Coating by Laser Cladding

Experimental Study on the Microstructure and Tribological Properties of Laser-Clad Ni60-WC Composite Coatings

Microstructure, Phase Constituents and Wear Behavior of Fe/Ni-based Laser Clad Layers

Microstructure and Wear Resistance of Fe-Cr-Mo-Co-C-B Amorphous Composite Coatings Synthesized by Laser Cladding

Comparative investigation on microstructures and properties of WC/Cr 3 C 2 reinforced laser cladding Ni-based composite coatings subjected to ultrasonic impact treatment

Comparison of microstructure and properties of FeCoNiCrMo 0.2 and FeCoNiCrMo 0.5 high-entropy alloy coatings on the surface of 4Cr5MoSiV steel by laser cladding

Structure and properties of nickel-plated CNTs/Fe-based amorphous composite coatings fabricated by high-speed laser cladding

Influence of Laser Cladding Parameters on Microstructure, Microhardness, Chemical Composition, Wear and Corrosion Resistance of Fe–B Composite Coatings Reinforced with B4C and Si Particles

Characteristics and Electrochemical Corrosion Behaviour of a Ni-Based Alloy Coating on Carbon Steel Formed by Laser-induction Hybrid Cladding

Study of the Microstructure and Corrosion Properties of a Ni-Based Alloy Coating Deposited onto the Surface of Ductile Cast Iron Using High-Speed Laser Cladding