Abstract:Since households are one of the most energy-intensive sectors in Europe, retrofit of dwellings is promoted to increase energy efficiency. Recent research, however, shows that the energy performance after retrofit does not always meet the target values, which can be caused by amongst other things, a deviating building envelope performance. This paper compares the theoretical and measured building envelope performance for a real-life case study in post-retrofit state, in order to illustrate the limitations of calculation methods and characterization models. First, the performance is evaluated on building scale by verifying the correspondence between the default theoretical heat loss coefficient (HLC) and the measured HLC, which was determined by following the guidelines formulated within IEA EBC Annex 58 and Annex 71. In order to illustrate the limitations of the standard calculation method in real-life conditions, the theoretical variability of the HLC is evaluated, generated by variating infiltration heat losses and heat exchange with neighboring dwellings. Second, the performance is investigated on a component scale by assessing the theoretical and measured thermal resistances, identified from heat flux tests. Additionally, nonhomogeneous assembled components and air leaks are simulated to verify probable causes for the locally varying measured values and to illustrate the limitations of calculations and characterization methods. The results illustrate the limitations of the calculation methods by the assessment of the strong variability of the theoretical HLC, depending on assumptions regarding infiltration and heat exchange with neighboring dwellings. In addition, component simulations indicated that deficiencies on a component scale could be caused by a nonhomogeneous assembly and air cavity flows of the component. Moreover, a detailed assessment of an unreliable thermal resistance illustrates the limitations of the used characterization method. Finally, a contrast was found between the quite good performance on building scale (15% deviation between the theoretical and measured HLC) and poor performance on a component scale (only one out of nine monitored components met their theoretical target values), which illustrates the complexity of the building envelope performance.

Assessment of Envelope Energy Performance in HK-BEAM for Residential Buildings

Energy-efficiency Strategies of Residential Envelope in China’s Hot Summer–Cold Winter Zone Based on Intermittent Thermal Regulation Behaviour

Experimental Evaluation of Ventilated Glazing Performance in Hong Kong

Assessment of energy and economic performance of office building models: a case study

Knowledge gap with the existing building energy assessment systems

Field Study on Energy Economic Assessment of Office Buildings Envelope Retrofitting in Southern China

Performance Evaluation of a PV Ventilated Window Applying to Office Building of Hong Kong

A Holistic Framework for Determining the Trade-off between Embodied and Operational Carbon Emissions of High-rise Residential Buildings

Identification of the Building Envelope Performance of a Residential Building: A Case Study

Investigating the impact of urban microclimate on building thermal performance: a case study of dense urban areas in Hong Kong

Analysis of Energy Saving and Emission Reduction Potential Through the Energy Efficient Building Design of a Residential Building in a Warm Humid Climate

Quantification of the energy use due to occupant behaviour collected in surveys: a case study of a green and non-green building

In search of sustainable construction: the role of building environmental assessment methods as policies enforcing green building

Impact of window and air-conditioner operation behaviour on cooling load in high-rise residential buildings

Balancing thermal comfort and energy efficiency in high-rise public housing in Hong Kong: Insights and recommendations

Influence of ventilation-behavior during off-periods on energy-consumption for an intermittently heated room of dormitory buildings

Comparative Study of Air-Conditioning Energy Use of Four Office Buildings in China and USA

A Comparative Study on the Performance of BIPV and Mainstream Insulation Materials for the Energy-Efficient Renovation of Existing Residential Buildings in China

An Analysis of Real-Time Measured Solar Radiation and Daylight and Its Energy Implications for Semi-Transparent Building-Integrated Photovoltaic Façades

Multiple influencing factors analysis of household energy consumption in high-rise residential buildings: Evidence from Hong Kong

Using response surface regression method to evaluate the influence of window types on ventilation performance of Hong Kong residential buildings