Abstract:The graduator is a very important standard device in the optical angular measuring instrument, which determines the measure precision of the measuring instrument. A new graduator test method is discussed in this paper. This test method is a dual dynamic imaging measurement method with dual digital microscope system, which acquires the images of the graduator rotated by a rotating motor. Here is the introduction of this method with more detail. At first, fix a graduator to be measured on a rotary stage, this stage will be driven by a high precision programmable motor. Make the stage rotate with a constant angular velocity ω. Then place the digital microscope system upon the graduator. The digital microscope system includes two digital microscopes, which placed in the opposite diameter direction. Each digital microscope is made up of optical lens and a CMOS electro-ocular. The sampling frequency f can be set in the control software of the elector-ocular. The two digital microscopes make up a dual dynamic image acquire system. This system can acquire two images of the moving graduator at the same time with the sampling frequency f. Then, a serial of the graduator images can be acquired after a period of rotation, and there is a constant angular difference ω/f between every adjacent image. Each image of the graduator includes several graduation lines, identify these lines and get the position of the lines with image processing method. The measuring value of the rotate angle can be calculated from the adjacent line positions. Use the angular difference ω/f as a standard value of the rotate angle. Compare the measuring value and the standard value with the "comparing method of graduator measurement" formula. A compare result will be given to judge the graduator is good or not at last. The whole system is divided into four functional units: 1,the motion control unit;2,the dual dynamic imaging unit; 3, the image processing unit; 4,the data analysis unit. The measurement principle is introduced in the first part of the paper. In this part, the background of graduator measurement and the theories of graduator measurement are referred. According to the measurement principle a system design is made in the second part of the paper. In this part, the whole measure system is described: the structure of the system, the function of each component and the specifications for the key components. An experiment system is build up under the design, and some measurement data is obtained, the error analyses of the measure data is given at the last of the paper.

Development of Gravity Acceleration Measurement Using Simple Harmonic Motion Pendulum Method Based on Digital Technology and Photogate Sensor

Measurement of the gravitational acceleration using a simple pendulum apparatus, ultrasonic sensor, and Arduino

Development of a computer-based simple pendulum experiment set for teaching and learning physics

A Graduator Test Method Based on Dual Dynamic Image Processing

Digitalization Study on Test System of Fiber Optic GYRO

Measurement of Acceleration Due to Gravity Using Arduino and Ultrasonic Sensor

A Study on Measurement of Gravity Acceleration by Simple Pendulum

Development of Digital Distance Measurement Instrument Based on Arduino Uno for Physics Practicum

A Fringe Signal Processing Method with Multi-Sample Zero-Crossing Detection Based on Dsp and Its Application in Absolute Gravimeters

Multiaccelerometer-Based Method for High-Precision Angular Acceleration Measurement of Turntable

Development of a Gravity Measurement System Based on Fiber-Optic Gyroscope

Computing the gravitational acceleration withing the World Pendulum Alliance: an application of the remote laboratory methodology implemented by UNAD

The Sound of G: A Method to Calculate The Acceleration Due to Gravity Using Acoustic Stopwatch

A Novel Angular Acceleration Sensor Based on the Electromagnetic Induction Principle and Investigation of Its Calibration Tests

Low Cost Attitude Determination System for Accelerated Rigid Bodies

A Measurement of Gravitational Acceleration Using a Metal Ball, a Ruler, and a Smartphone

Systematic Research on Measuring Acceleration of Gravity by Laser Interferometry

Use of Tracker software for teaching distance physics laboratories: Demonstration of error reduction in the simple pendulum

Rancang Bangun Alat Gerak Jatuh Bebas Berbasis Arduino Uno Pada Praktikum Fisika

Calibrate the Gravity Acceleration by Improved Pendulum Experiment System and SPSS