Abstract:Metal-supported solid oxide fuel cell (MS-SOFC) has been attracting increasing attention due to relatively low materials cost and robust mechanic strength particularly for mobile applications. However, long term stability has been an issue for its application. It is challenging to isolate the degradation behavior and predict maximum lifetime of the metal substrate when assembled as full cell since many parameters may affect cell performance and life expectancy. We systematically investigated and reported the long-term oxidation behavior of porous stainless steel 430 L for up to 1500 h at 800°C under dry and 3 vol% H 2 O humidified H 2 /Ar mixture (10 vol% H 2 ) atmosphere to simulate its applications in MS-SOFC. Our results show that the surface oxide scale of the porous 430Lsubstrate in both atmospheres are dominated by Cr 2 O 3 and small amounts of MnCr 2 O 4 or FeCr 2 O 4 spinel oxides depending on the gas conditions, where the oxidation process could be divided into three stages with distinct characteristics. Stepwise surface color change, morphology and thickness of the formed oxide scale, elemental migration and distribution along the bulk alloy/oxide scale interface, and oxidation kinetics as a function of exposure time are systematically and thoroughly studied at high resolution. Based on the measured weight gains and thicknesses, oxidation kinetic parameters are extracted. These kinetic parameters are not only valuable for understanding the oxidation rate of porous 430 L in high temperature applications such as in MS-SOFC, but also can be used to predict the life expectancy of 430 L supported SOFC device which is critical for real and long-term applications.

Oxidation behavior of a Ni-Fe support in SOFC anode atmosphere

Porous Ni–Fe Alloys As Anode Support for Intermediate Temperature Solid Oxide Fuel Cells: I. Fabrication, Redox and Thermal Behaviors

Porous Nickel-Iron Alloys As Anode Support for Intermediate Temperature Solid Oxide Fuel Cells: II. Cell Performance and Stability

Oxidation Behavior and Electrical Property of A Ni-Based Alloy in Sofc Anode Environment

Performance Evaluation of a New Fe-Cr-Mn Alloy in the Reducing Atmosphere of Solid Oxide Fuel Cells

Oxidation of Haynes 230 alloy in reduced temperature solid oxide fuel cell environments

Investigation into the diffusion and oxidation behavior of the interface between a plasma-sprayed anode and a porous steel support for solid oxide fuel cells

Oxidation Kinetics and Phase Evolution of a Fe–16Cr Alloy in Simulated SOFC Cathode Atmosphere

A Novel High Performance Composite Anode with in Situ Growth of Fe-Ni Alloy Nanoparticles for Intermediate Solid Oxide Fuel Cells

In Situ Growth of LaSr(Fe,Mo)O4 Ceramic Anodes with Exsolved Fe–Ni Nanoparticles for SOFCs: Electrochemical Performance and Stability in H2, CO, and Syngas

Fabrication and Study on Ni1−xFexO-YSZ Anodes for Intermediate Temperature Anode-Supported Solid Oxide Fuel Cells

Oxidation behavior and interface diffusion of porous metal supported SOFCs with all plasma sprayed functional layers in air at 65OoC

A Robust Carbon Tolerant Anode for Solid Oxide Fuel Cells

Ni-Substituted Sr(Ti,Fe)O-3 SOFC Anodes: Achieving High Performance Via Metal Alloy Nanoparticle Exsolution

Heat resistant alloys as interconnect materials of reduced temperature SOFCs

Interfacial Interaction Between Ni and Oxide in SOFC Anodes

High performance Ni–Fe alloy supported SOFCs fabricated by low cost tape casting-screen printing-cofiring process

Electrochemical performance and redox stability of solid oxide fuel cells supported on dual-layered anodes of Ni-YSZ cermet and Ni–Fe alloy

Nickel-Iron Alloy Nanoparticle-Decorated K2NiF4-Type Oxide as an Efficient and Sulfur-Tolerant Anode for Solid Oxide Fuel Cells

Unravelling the oxidation behaviors of porous stainless steel 430L substrate for metal-supported solid oxide fuel cells

Oxidation behavior and interface diffusion of porous metal supported SOFCs with all plasma sprayed functional layers in air at 650oC