Abstract:The film capacitor, one typical type of electrostatic capacitors, exhibits its unique advantages in the high-power energy storage devices operating at a high electric field due to the high electrical breakdown strength (Eb) of the polymeric films. However, the development of film capacitor towards high energy storage density is severely hindered by the low dielectric constant (ε) and low charge-discharge efficiency (η) of the polymeric films. The film of polypropylene (PP), the most used polymeric film with a market share of 50%, owns a high η due to its low inherent hysteresis loss. Yet the low ε (2.2 at 103 Hz) impedes the increase of its energy storage density (1-2 J/cm3). Here we demonstrate that the discharged energy density (Ue) of PP film could be largely increased from 1.40 J/cm3 of pure PP film to 3.86 J/cm3 of PP nanocomposite film by incorporating a small loading of core-shell structured 3 () nanoparticles (2.27 vol%) into PP matrix. The obtained Ue of 3.86 J/cm3, to the best of our knowledge, is the highest reported value for the PP based films using commercial PP resin. Meanwhile, the η merely undergoes a slight decrease from 99.5% to 94.1%. Similarly, the obtained η of 94.1%, to the best of our knowledge, is also the highest value for the polymeric films reported in the previous works. The significant increase of Ue (175.7%) and negligible decrease of η (5.4%) are mainly attributed to the increase of ε from 2.2 to 3.7 and Eb from 361 MV/m to 448 MV/m. Compared with the films of raw BT/PP nanocomposites, the Ue exhibits a significant increase of 365.1% from 0.83 J/cm3 to 3.86 J/cm3 and the η also displays an increase of 7.4% from 87.6% to 94.1%. The significant improvement of energy storage performance achieved in the film of /PP nanocomposite suggests that the organic PMMA shell plays an important role in the amelioration of compatibility of BT nanoparticles and PP matrix and the alleviation of local electric field concentration. Moreover, the PMMA shell could also provide a robust scaffold to hinder the early breakdown failure of nanocomposites due to its high Eb (425 MV/m). Thus, high ε, low loss and high Eb were simultaneously achieved. Specifically, the high hot stretch ratio (1:4) of nanocomposite film indicates the strong feasibility of industrialized film processing. Apart from the experimental analysis, theoretical analysis using the simulation of finite element is also carried out to figure out the influence of organic PMMA shell on the dielectric performance of PP nanocomposites films. These findings enable the development of film capacitor using non-polar PP based film towards high energy storage density.

Biodegradable nanocomposite derived from PLA/PBAT blends with transition metal cation-doped porous clay heterostructures for flexible capacitor applications

Biodegradable Poly( l -Lactic Acid) Films with Excellent Cycle Stability and High Dielectric Energy Storage Performance

Few-layer Boron Nitride Nanosheets/poly (vinylidene Fluoride-Trifluoroethylene-chlorofluoroethylene) Dielectric Nanocomposite Functionalized with Grafting POSS Copolymer

Towards sustainable electronics: High-performance biodegradable polymer-based dielectric composite utilizing hydroxyapatite from cattle bone waste

Binary Blends of Poly(lactic Acid) and Poly(methyl Methacrylate) for High Energy Density and Charge/Discharge Efficiency Capacitors

Enhanced dielectric and mechanical properties of polylactic acid/polycaprolactone blends by introducing double‐layer carbon nanofillers

Stereocomplex Crystals Induced Outstanding Energy Storage Performance with PLLA/PDLA Blend Film

High energy density and discharge efficiency polypropylene nanocomposites for potential high-power capacitor

Dual Crosslinked PMMA/BaTiO3 Polymer Nanocomposite Dielectrics for Flexible Film Capacitors

Porosity Tunable Poly(Lactic Acid)-Based Composite Gel Polymer Electrolyte with High Electrolyte Uptake for Quasi-Solid-State Supercapacitors

Modified Cellulose Nanocrystals Enhanced the Compatibility Between PLA and PBAT to Prepare a Multifunctional Composite Film

Core–Shell Structured Biopolymer@BaTiO3 Nanoparticles for Biopolymer Nanocomposites with Significantly Enhanced Dielectric Properties and Energy Storage Capability

Effect of hydroxyl and carboxyl-functionalized carbon nanotubes on phase morphology, mechanical and dielectric properties of poly(lactide)/poly(butylene adipate-co-terephthalate) composites

Flexible, yet robust polyaniline coated foamed polylactic acid composite electrodes for high-performance supercapacitors

Flexible and low roughness cast films: promising candidates for capacitor applications

Effect of organic Na + ‐montmorillonite on the dielectric and energy storage properties of polypropylene nanocomposites with polypropylene‐graft‐maleic anhydride as compatibilizer

Electron Structure in Modified BaTiO 3 /poly(vinylidene Fluoride) Nanocomposite with High Dielectric Property and Energy Density

Flexible barium titanate@polydopamine/polyvinylidene fluoride/polymethyl methacrylate nanocomposite films with high performance energy storage

Significantly improved high-temperature capacitive performance in polypropylene based on molecular semiconductor grafting

Flexible Polyarylene Ether Nitrile/BaTiO 3 Nanocomposites with High Energy Density for Film Capacitor Applications

The effect of different clay types on the barrier properties of PLA/PBAT/clay bio-nanocomposite packaging films