Abstract:Solution-processed semiconductors have opened promising avenues for next-generation semiconductor and optoelectronic industries. Colloidal quantum dots (QDs) as one of the most typical materials are widely utilized for the design and development of light-emitting diodes, photodetectors, and solar cells. Recently, an emerging process of PbS QD ink has been employed to attain world record power conversion efficiency by surface passivation using a PbI2 ligand to form PbI2–PbS and the process optimization in the field of photovoltaics. However, the bonding and debonding of the ligands on the surface of PbS QDs are dynamic reversible processes in an ink environment. The uncoordinated Pb2+ defects induced by unbonded PbS QDs serve as the recombination sites. Thus, the present ink process leaves much room for the enhancement by surface passivation of PbS QDs. Herein, we devise an efficient strategy with a supplementary phenethylammonium iodide (PEAI) ligand for the formation of the PEAI–PbS interface in PbS QD ink-processed solar cells. This newly developed method can not only improve the passivation on the QD surface by iodine ions but also simultaneously enhance the carrier collection efficiency by a graded energy alignment between PbI2–PbS and PEAI–PbS layers. The corresponding power conversion efficiency of the optimized device has significantly increased by approximately 20% more than the control device. As a result, such a robust and efficient method regarded as a strategic candidate can overcome the bottleneck of imperfect passivation caused by a large specific surface area and loose bonding ligands, eventually promoting the industrial application of QDs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c08135?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c08135</a>.Absorbance results, description for detailed testing conditions, TEM images of OA–PbS QDs, XPS spectra of QD films about I 3d signal, FTIR data for QD films, device performances of PbS QDs by different supplemental treatment condition (ligands/concentration/annealing temperature/immersing time/solvents), AFM images of control and PEAI-QD films, XRD of QD films, SEM image of control and PEAI-QD films, UPS of ZnO and EDT–PbS QD films, TA results of control and PEAI-QD films, EIS spectra of the photovoltaic devices, and device performance as a function of CQD film thickness (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c08135/suppl_file/am0c08135_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

High‐Efficiency PbS Quantum‐Dot Solar Cells with Greatly Simplified Fabrication Processing via “Solvent‐Curing”

Solvent Engineering For High-Performance Pbs Quantum Dots Solar Cells

Stable and Highly Efficient PbS Quantum Dot Tandem Solar Cells Employing a Rationally Designed Recombination Layer

Low-Cost, Air-Processed Quantum Dot Solar Cells via Diffusion-Controlled Synthesis

Solvent-Engineering-Assisted Ligand Exchange Strategy for High-Efficiency AgBiS2 Quantum Dot Solar Cells

Optimizing Surface Passivation of n‐Type Quantum Dots for Efficient PbS Quantum Dot Solar Cells

Stable PbS quantum dot ink for efficient solar cells by solution-phase ligand engineering

Enhanced Passivation and Carrier Collection in Ink-Processed PbS Quantum Dot Solar Cells via a Supplementary Ligand Strategy

Tailoring Solvent-Mediated Ligand Exchange for CsPbI3 Perovskite Quantum Dot Solar Cells with Efficiency Exceeding 16.5%

Solution Annealing Induces Surface Chemical Reconstruction for High-Efficiency PbS Quantum Dot Solar Cells

Over 15% Efficiency PbS Quantum‐Dot Solar Cells by Synergistic Effects of Three Interface Engineering: Reducing Nonradiative Recombination and Balancing Charge Carrier Extraction

Interfacial Heterojunction Enables High Efficient PbS Quantum Dot Solar Cells

Optimizing Surface Chemistry of PbS Colloidal Quantum Dot for Highly Efficient and Stable Solar Cells via Chemical Binding

10.6% Certified Colloidal Quantum Dot Solar Cells Via Solvent-Polarity-Engineered Halide Passivation

Efficient and Stable PbS Quantum Dot Solar Cells by Triple-Cation Perovskite Passivation

In Situ Passivation for Efficient PbS Quantum Dot Solar Cells by Precursor Engineering

An Excellent Modifier: Carbon Quantum Dots for Highly Efficient Carbon‐Electrode‐Based Methylammonium Lead Iodide Solar Cells

Optimizing Energy Levels and Improving Film Compactness in PbS Quantum Dot Solar Cells by Silver Doping

Tailored Graphene Quantum Dots to Passivate Defects and Accelerate Charge Extraction for All-Inorganic CsPbIBr2 Perovskite Solar Cells

Passivation Strategy of Reducing Both Electron and Hole Trap States for Achieving High-Efficiency PbS Quantum-Dot Solar Cells with Power Conversion Efficiency over 12%

Quantum Dot Interface-Mediated CsPbIBr 2 Film Growth and Passivation for Efficient Carbon-Based Solar Cells