Abstract:The object of research is the process of FVNM manufacturing. One of the most problematic places in the production of filter materials is the lack of recommendations for determining the structure of these elements, depending on the field of application. In the course of research, the main application areas of the elements, which are made of «foamed» polypropylene, were analyzed. As a result of the analysis it is revealed that the main functions that these elements perform are mainly drainage or filtering. A one-component model of suspension flow through a porous medium is considered, granulometric analysis of the purified liquid is carried out and the percentage state of the filtrate is obtained depending on the particle size. This result allows to see that the distribution of the filtrate as a function of time can be divided into groups: almost 30 % – 1–5 μm; almost 60 % – 10–50 μm. It is found that, depending on the field of application and the purpose of the filter element, it can have a different number of layers and a different structure of these layers. Using the results of granulometric analysis, it can be concluded that 70 % of the filter elements have a three-layer structure. The construction of a multilayer filter element by changing the air pressure on the equipment to form FVNM is experimentally proved. The technique for organization of calculations of the amount of filtering material of a certain structure is obtained depending on: – filtration process that involves determining the input data of a liquid or gas that will be filtered; – formulas for calculating the luminous efficiency of the filter and the filtration performance. This technique is practical in nature and can be applied in production. This technique has improved the interaction with customers by 40 %, due to a faster calculation of the required amount of filter material and the formation of the final cost of the order. Thanks to the obtained calculations, a prototype of a software tool has been developed that allows selecting the structure and dimensions of the filter element depending on the application and media. After the testing phase, this software will be used as one of the modules of the process automation system for production of polypropylene mechanical cartridges with subsequent introduction at the enterprises that manufacture filter elements.

Software for productivity calculation of polypropylene filtering element in dependence from its application

Optimization on the performance of fibrous filter through computational fluid dynamic simulation coupled with response surface methodology

System Analysis Research Methodology for Liquid Media Ultrafiltration Process

Numerical simulation and experimental tests of the filter with a rotating cylindrical perforated filter element

Analysis of Pleated Discrete Pore Non Woven Layer Type Filter Element for Naval Applications

Production of high-performance multi-layer fine-fibrous filter material by application of material extrusion–based additive manufacturing

Modeling and Simulation of Filtration Processes

Three-dimensional numerical simulation and structural optimization of filtration performance of pleated cylindrical metal fiber filter

NUMERICAL ANALYSIS OF MEDIUM COMPRESSION AND LOSSES IN FILTRATION AREA IN PLEATED MEMBRANE CARTRIDGE FILTERS

Using Symbolic Regression Models to Predict the Pressure Loss of Non-Newtonian Polymer-Melt Flows through Melt-Filtration Systems with Woven Screens

Investigation of air filter properties of nanofiber non-woven fabric manufactured by a modified melt-blowing method along with flash spinning method

Experimental Characterization of the Mechanical Properties of Filter Media in Solid–Liquid Filtration Processes

Finite-element modelling of combined free/porous flow regimes: simulation of flow through pleated cartridge filters

Instrumental software package for simulation modeling of membrane separation processes of liquid dispersed systems

CFD-Based Spherical Fiber Filter Structure Performance Simulation Research

Combining Solution-Blowing and Melt-Blowing Techniques to Produce an Efficient Non-Woven Filter

Mathematical Modeling of Sediments in the Filter and Improvement of the Filter Construction

Modified Bundle of Capillaries Approximation of Sterilizing Filter Membranes and its use for Filter Characterization and Filtration Process Optimization

Efficiency of using foamed glass for biofilter of an aquaculture recycling system

High fidelity simulation of ultrafine PM filtration by multiscale fibrous media characterized by a combination of X-ray CT and FIB-SEM