Abstract:Copper as well as copper base composites reinforced with coated and uncoated 1 wt% diamond, graphite particles or short carbon fibers are prepared by powder metallurgy process. The reinforcement particles were encapsulated with silver as well as copper layer by using the electroless deposition technique to investigate the influence of the reinforcement surface coating on the microstructure, density, electrical and thermal properties of the sintered samples. The coated and the uncoated powders were cold compacted at 600 MPa, and then sintered at 1173 K (900°C) for 2 h under hydrogen atmosphere. The phase composition, morphology and microstructure of the prepared powders as well as the copper base sintered composites were investigated using X-ray diffraction analysis (XRD) and Scanning Electron Microscope (SEM) equipped with an Energy Dispersive Spectrometer (EDS) respectively. The density of the sintered composites was measured by Archimedes method. The copper base consolidated composites had a density up to 96% and the reinforcement coated particles were distributed uniformly within the copper matrix better than the uncoated one. The electrical resistivity at room temperature and the heat transfer conduction of the produced samples were measured in a temperature range between 323 K (50°C) and 393 K (120°C). The results observed that the sintered materials prepared from the coated powder have lower electrical resistivity than the sintered materials prepared from the mixed powders. On the other hand the thermal conductivity values were calculated using the heat transfer conduction values by means of the Fourier formula. The results observed that the thermal conductivity of copper is (391 W/m·K), 1 wt% diamond/Cu is (408 W/m·K), 1 wt% graphite coated silver/Cu is (393 W/m·K), 1 wt% Cu coated short carbon fiber/Cu is (393 W/m·K), graphite/Cu is (383 W/m·K) and short carbon fiber/Cu is (382 W/m·K). The obtained composites are expected to be suitable for heat sink applications. The heat transfer testing experiments were done. The forced convection of the present work was done and compared with the previous work in the literature, and satisfactory agreement was achieved.

Thermal and Electrical Conductivity of Unsaturated Polyester Resin Filled with Copper Filler Composites

Effect of Thermal Annealing on the Electrical Conductivity of Copper-Tin Polymer Composites.

Electric Conductivity and Thermorheology Properties of Polyacrylonitrile/Nylon6 Composites Filled with Carbon Black

Conducting Property of Unsaturated Polyester Composite

Effects of spherical fillers reinforcement on the efficacy of thermal conductivity in epoxy and polyester matrices: Experimental validation and prediction using finite element method

Thermal Properties of Copper Matrix-Ceramic Filler Composite Prepared by Polymer Solution Method

Dielectric properties of the polymer based composites filled by the different conductivities fillers

Study on Thermal Conductivity of Metal/Polymer Composites Based on Software Ansys

Electrical and Heat Conduction Properties of Polymerization-Filled Composites Based on Ultra-High-Molecular-Weight Polyethylene and Nano- and Micron-Sized Aluminum Particles

Thermal Conductive and Dielectric Properties of Epoxy Resin with Bimetal Filler of Zn–Cu Particle

Thermal conductivity and dielectric properties of immiscible LDPE/epoxy blend filled with hybrid filler consisting of HGM and nitride particle

Thermal Properties of the Binary-Filler Composites with Few-Layer Graphene and Copper Nanoparticles

Particle packing theory guided multiscale alumina filled epoxy resin with excellent thermal and dielectric performances

Fabrication, Microstructure, Thermal and Electrical Properties of Copper Heat Sink Composites

Epoxy/ copper-nickel metal foam composites with high thermal conductivity using an electroplating method

Thermal conductive nylon 6 composites using hybrid fillers to construct a three‐dimensional thermal conductive network

Physical, Thermal Transport, and Compressive Properties of Epoxy Composite Filled with Graphitic- and Ceramic-Based Thermally Conductive Nanofillers

Functional Polymer Composite with Core-Shell Ceramic Filler: II. Rheology, Thermal, Mechanical, and Dielectric Properties

Highly Conductive Polymer Composites from Room-Temperature Ionic Liquid Cured Epoxy Resin: Effect of Interphase Layer on Percolation Conductance

Conductive characterization of composites filled by conducting polymer particles

Insight into the interface effect and PTC effect on the temperature-adaptive electrical conductivity of epoxy composite