Abstract:Waste plastic conversion involves the treatment of plastic waste to transform in different forms of energy (heat, electricity, liquid fuels). Plastic can be converted into different forms of biofuel via thermochemical conversion methods (gasification, pyrolysis and liquefaction). Algal biomass can be converted into different forms of biofuel (crude bio-oil, bioethanol, biogas, biodiesel and bio-hydrogen) well as value added chemicals. Microalgal cells can accumulate more lipids over a shorter life cycle, they are discussed as a promising feedstock for third-generation biodiesel. The utilization of microalgae as biofuel feedstocks offers an economic, ecofriendly alternative to the use of fossil fuels the aim of microplastics (MPs) removals. Interactions between MPs and microalgal cells could enhance several important features for possible microalgal harvest and MPs accumulation. One hypothesis is microalgal biomass hypothesis can accumulate lipids and carbohydrates under microplastic stress, supporting biomass conversion into biodiesel and bioethanol. In such systems, algal cells act as bio-scavengers for MPs, binding the particles to algal surfaces or incorporating them into their cells; they are filtered from the water body and finally destroyed by further downstream processing of the polluted biomass. In this study, in order to determine biofuel (1-butanol) and methane gas [CH4(g)] production; High- and low-density polyethylene (HDPE and LDPE), polypropylene (PP), and polyvinyl chloride (PVC) MPs were removed using biomass composed of microalgae Chlamydomonas reinhardtii and Chlorella vulgaris. The algal inhibition test results proved that small groups of MPs with a size of ≈ 100 nm did not show algal inhibition. According to the algae inhibition test results, the production of 1-butanol from 100 mg/l microalgae biomass under aerobic conditions were determined as 93 ml/g for HDPE, 236 ml/g for LDPE, 387 ml/g for PP and 459 ml/g for PVC. According to the algae inhibition test results, the production of CH4(g) from 400 mg/l microalgae biomass under anaerobic conditions were measured as 452 ml/g for HDPE, 510 ml/g for LDPE, 529 ml/g for PP and 541 ml/g for PVC. 91.26%, 94.52%, 98.34% and 96.17% energy recoveries were measured for HDPE, LDPE, PP and PVC MPs, respectively, after microalgae biomass experiments, at pH=7.0 and at 35oC. Maximum 98.34% energy recovery was obtained for PP MPs after microalgae biomass experiments, at pH=7.0 and at 35oC.

Highly effective removal of microplastics by microalgae Scenedesmus abundans

Removal of micron-scale microplastic particles from different waters with efficient tool of surface-functionalized microbubbles

Ultralight sponge made from sodium alginate with processability and stability for efficient removal of microplastics

Enhancing aggregation of microalgae on polystyrene microplastics by high light: Processes, drivers, and environmental risk assessment

Microplastics in aquatic environments: A comprehensive review of toxicity, removal, and remediation strategies

Effective removal of microplastics by filamentous algae and its magnetic biochar: Performance and mechanism

Effect of Microplastics on the Removal of Nitrogen and Phosphorus from Synthetic Piggery Digestate by Microalgae

A critical review of microplastics in aquatic ecosystems: Degradation mechanisms and removing strategies

The role of algae in regulating the fate of microplastics: A review for processes, mechanisms, and influencing factors

Different interaction performance between microplastics and microalgae: The bio-elimination potential of Chlorella sp. L38 and Phaeodactylum tricornutum MASCC-0025

The humic acid-like substances released from Microcystis aeruginosa contribute to defending against smaller-sized microplastics

Adsorption mechanism of trace heavy metals on microplastics and simulating their effect on microalgae in river

Comprehensive effects of microplastics on algae-laden surface water treatment by coagulation-ultrafiltration combined process: Algae cultivation, coagulation performance and membrane fouling development

Separation and Identification of Microplastics from Soil and Sewage Sludge.

Effect of Different Size Microplastic Particles on the Construction of Algal-Bacterial Biofilms and Microbial Communities.

Evaluating physiological responses of microalgae towards environmentally coexisting microplastics: A meta-analysis

Enhancing microplastic removal from natural water using coagulant aids

Removals of Some High- and Low-Density Polyethylene (HDPE and LDPE), Polypropylene (PP) and Polyvinyl Chloride (PVC) Microplastics Using Some Microalgae Types, Energy Production and Energy Recovery

Effects of environmental microplastic exposure on Chlorella sp. biofilm characteristics and its interaction with nitric oxide signaling

[Advances in the Separation and Removal of Microplastics in Water Treatment Processes]

Microplastics in Water: A Review of Characterization and Removal Methods