Abstract:Simultaneous estimation of both the location and force history of an impact applied on a lattice truss core sandwich panel is inversely carried out utilizing velocity signals collected by means of a scanning laser Doppler vibrometer. The algorithm assumes that several impact forces are exerted concurrently on a number of specified locations on a panel, provided that the magnitude of all impact forces but one is actually equal to zero. This condition equates to a scenario where an impact occurs at only one location. The purpose is therefore to detect the actual impact location among all potential locations, together with its force history, through minimizing error functions. Two algorithms, the one-to-one (even-determined) approach and the superposition approach, are considered. The one-to-one approach solves the reconstruction problem independently for each pair of impact and measurement points. However, in the superposition approach, the impact forces at all potential locations are concurrently reconstructed through a single matrix equation. It is shown that the one-to-one approach fails to detect the true impact location while the superposition approach recognizes the actual impact location based on some qualitative evaluating criteria. Adopting the superposition approach, for a problem with four possible impact locations, two scenarios one with four and one with 12 measurement points, are investigated. It is observed that the additional measurement points do not necessarily enhance the efficiency and accuracy of the proposed method. It is found that different arrangements of measuring points lead to identification of the location and the magnitude of the impact force, though the use of four evenly distributed measurement points seems to be most effective in simultaneous identification of the location and magnitude of the impact force. Further, a quantitative index based on the concept of similarity search for time-series using wavelet transformation is proposed and it is demonstrated that the index can successfully identify the true impact force location in a fully automated way.

Across the Picket Fence: Influence of Sampling Frequency in Automatic Impact Modal Testing

Modal testing on a limited budget: Analysis of instrumented hammer alternatives for impact testing

A Fast Automated Impact Hammer Test Method for Modal Parameter Extraction: Implementation on a Composite Bridge Beam

Forty Years of Use and Abuse of Impact Testing: A Practical Guide to Making Good FRF Measurements

Multiple Impact Phenomenon in Impact Hammer Testing: Theoretical Analysis and Numerical Simulation

An Open-Source, Scalable, Low-Cost Automatic Modal Hammer for Studying Nonlinear Dynamical Systems

Semi-automated impact device based on human behaviour recognition model for in-service modal analysis

Input force and floor impedance measurement for the standard tapping machine and the standard impact ball

Explaining impact echo geometry effects using modal analysis theory and numerical simulations

A dynamic modal testing technique for noninvasive assessment of bone-dental implant interfaces

A dispersion-based impact identification method: mechanical model and experimental verification

Impact Identification on Concrete Panels Using a Surface-Bonded Smart Piezoelectric Module System

Influence of Sensor Position and Low-Frequency Modal Shape on the Sensitivity of Vibro-Acoustic Modulation for Impact Damage Detection in Composite Materials

Concurrent Identification of Impact Location and Force Magnitude on a Composite Panel

Evaluation of modal frequencies obtained with the impact hammer technique on an epoxy matrix composite material reinforced with glass fibers

Identification Of Location And Magnitude Of Impact Force On A Composite Sandwich Structure With Lattice Truss Core

Hopkinson bar impact force measurement for application to development of an artificial bird

Identification of Modal Parameters from Noisy Transient Response Signals

An Impact Velocity Measurement System for Electromagnetic Forming Process

Research on Modal Analysis and Impact Force Inversion Based on Compressive Sampling Data

Challenging an experimental nonlinear modal analysis method with a new strongly friction-damped structure