Abstract:Metal/composite hybrid structures, which combine low-density composites with low-cost metallic materials, exhibit considerable potential to provide cost-effective energy-absorbing devices for automotive applications. This study aimed to explore crashworthiness characteristics of aluminum/carbon fiber reinforced plastic (CFRP) hybrid tubes, experimentally and numerically, subjected to three different loading angles by comparing with the aluminum alone and CFRP alone tubes, in which the deformation patterns and several key indicators related to the crashworthiness of these structures were assessed. The experiments revealed that the CFRP tube has the highest SEA under the axial (37.82 J/g) and 15° loading (30.03 J/g) angles of all the configurations concerned; while the hybrid tube showed the greatest energy absorption. It was found that the energy absorption capacity of all specimens reduced in different extent with increasing loading angle. Specifically, with the loading angle up to 15°, SEA of the hybrid tube decreased by 10.0% from that with the axial loading; whereas SEA of the CFRP tube decreased by 20.6% from that of the axial loading. It means that the hybrid tube was more capable to mitigate the effects of oblique load on energy absorption capacity in comparison with the net CFRP tube. To better understand the crashing mechanism, numerical models were created and validated by the experimental data. A parametric study was further performed to investigate the effects of loading angle, thickness of aluminum layer, stacking sequence and thickness of CFRP layers on crashworthiness of these structures. It was found that the number of CFRP layers is more important to energy absorption of the hybrid tube. For the pure CFRP tube, there is significant difference between the axial and oblique loading conditions, making it disadvantageous to be a proper crashworthy structure. Whereas for the hybrid tube, the effect of loading angle on energy absorption capacity is considerably mitigated; and consequently, the hybrid configuration offers a higher energy absorption capacity for meeting the crashworthiness requirements accommodating complex impacting angles.

Effect of Crushing Speed Rate on Crashworthiness Parameters and Energy Absorption Capability of Composite Materials

Strain-Rates Dependent Constitutive Law for Crashworthiness and Parameter Sensitivity Analysis of Woven Composites

Hybrid Metal/Composite Structures Under Quasi-static Axial Compression Loads: A Comparative Study

Energy absorption of metal, composite and metal/composite hybrid structures under oblique crushing loading

On Crashworthiness and Energy-Absorbing Mechanisms of Thick CFRP Structures for Railway Vehicles

Energy Absorption Capability and Crashworthiness of Composite Material Structures: A Review

Hybridization effect on energy absorption capacity of composite crash boxes

Enhancing Impact Energy Absorption, Flexural and Crash Performance Properties of Automotive Composite Laminates by Adjusting the Stacking Sequences Layup

Optimizing the crashworthy behaviors of hybrid composite structures through Taguchi approach

Crush Analysis of Hybrid Glass/Nano-Silica/Epoxy Composite Cylinders Under Lateral Loading Conditions

Static and dynamic axial crushing analysis of car frontal impact hybrid absorbers

A numerical study on energy absorption capability of lateral corrugated composite tube under axial crushing

Multi-response optimization of crashworthy performance of perforated thin walled tubes

Crushing responses of carbon/glass hybrid composite tubes under dynamic compressive loads

Comparative Study of Energy Absorption Capability of Flat Plate Coupons Made by CFRP Plain Weave Fabric Composites

Crash Energy Absorption of Braided Composite Tubes and its Application in Vehicle Passive Safety

Energy Absorption and Failure Modes of Different Composite Open-Section Crush Elements under Axial Crushing Loading

The effect of stacking sequences on energy absorption in axial crushing of CFRP stanchions for the cargo floor structure of airplanes

On axial crushing behavior of double hat-shaped CFRP and GFRP structures

Composite Hat Structure Design for Vehicle Safety: Potential Application to B-Pillar and Door Intrusion Beam

Numerical Investigation into In-Plane Crushing of Tube-Reinforced Damaged 5052 Aerospace Grade Aluminum Alloy Honeycomb Panels