Abstract:The microfluid jet polishing (MFJP) process is a manufacturing technology in which small abrasive particles (such as diamond, alumina, and ceria) are premixed with a carrier fluid (typically water) to form a liquid suspension that is pressurized and expelled through a nozzle for material removal. The resulting microjet beam—with a typical nozzle exit diameter in the range from 0.1 to 1.0 mm—impinges the workpiece surface for material removal by erosion and/or abrasion and produces an ultraprecision surface. This work applies a computational fluid dynamics (CFD) model to analyze the key phenomena in the interaction of the liquid suspension and the workpiece surface. The liquid film characteristics (film height, minimum film height, positions of the minimum film height, and hydraulic jump) obtained from the CFD simulations are compared with the results derived from empirical formulations found in the literature. Subsequently, the numerical results are utilized to investigate the impact velocity, pressure distribution, and shear stress caused by the suspension on the workpiece surface. It is observed that the shear stress strongly depends on the injection pressure of the liquid suspension and is weakly dependent on the abrasive suspension concentration (the liquid suspension with different densities, viscosities, and surface tensions). Additionally, the particle behavior is investigated in order to estimate the impact velocity and to identify the impact and erosion zones of the liquid suspension on the workpiece surface. Numerical results indicate that ~50% of total particles are impinging the workpiece surface almost perpendicularly (with a mean impact angle of ~86 degrees) for the first time in the stagnation region, where they are strongly decelerated by the carrier fluid before they reach the workpiece surface. These particles, however, rebound on the surface and are reaccelerated by the carrier fluid, impinging the workpiece surface further in the radial direction.

Design and setup of a jet-based technology for localized small scale Plasma electrolytic Polishing

Surface morphology in plasma jet polishing: theoretical description and application

Influence of Anode Immersion Speed on Current and Power in Plasma Electrolytic Polishing

Advancements in surface finish for additive manufacturing of metal parts: a comprehensive review of plasma electrolytic polishing (PEP)

Towards an Understanding of Multiphase Fluid Dynamics of a Microfluid Jet Polishing Process: A Numerical Analysis

Effect of Process Parameters on the Roughness and Wetting Characteristics of SS304 Surfaces Using Electrolytic and Plasma Electrolytic Polishing Techniques

Improvement of Plasma Jet in Atmospheric Pressure Plasma Polishing

Effect of energy distribution on the machining efficiency and surface morphology of Inconel 718 nickel-based superalloy using plasma electrolytic polishing

A novel approach of jet polishing for interior surface of small grooved components using three developed setups

Novel multiphase jet polishing for complicated structured components produced by laser powder bed fusion

The Development of the Stress-Free Polishing System Based on the Positioning Error Analysis for the Deterministic Polishing of Jet Electrochemical Machining

Plasma jet assisted polishing of fused silica freeform optics

Pulse electrochemical meso/micro/nano ultraprecision machining technology

Design of the Atmospheric Pressure Plasma Polishing System for Machining of Ultra Smooth Surface

Plasma Electrolytic Polishing-An Ecological Way for Increased Corrosion Resistance in Austenitic Stainless Steels

Diagnostics and characterization of a novel multi gas layer RF atmospheric pressure plasma jet for polymer processing

An Investigation into the Deterioration of Copper Surface Quality in Plasma Electrolytic Polishing

Surface Polishing of Laser Powder Bed Fused Inconel 625 Surfaces Using Multi-jet Hydrodynamic Cavitation Abrasive Finishing: An Emerging Class of Cleaner Surface Enhancement Process

Numerical and experimental investigation on the material removal profile during polishing of inner surfaces using an abrasive rotating jet

Novel cavitation fluid jet polishing process based on negative pressure effects

The Tool Electrode Investigation of Electrostatic Field-Induced Electrolyte Jet (E-Jet) Electrical Discharge Machining