Abstract:The utilization of large quantities of shield muck resources is a pressing issue that requires immediate attention and resolution. In this paper, an innovative approach that fully utilizes shield muck as an aggregate for synchronous grouting is introduced to realize the in situ resource utilization of this material. The newly formulated synchronous grouting grouts comprise shield muck and a solid waste-based cementitious material. The influences of components and compositions on the macroscopic performance of new grouts are investigated, and the formulation is optimized with a single-factor test and response surface methodology (RSM) analysis. The optimal formulation with a slurry specific gravity (SG) of 1.383 g/cm³ and a cementitious material (CM) content of 21.456% is determined. The microscopic characteristics of the grouts are revealed by scanning electron microscopy (SEM) and X-ray powder diffraction (XRD). Two main hydration products, namely AFt and C-S-H gel, are observed, exhibiting a crisscross growth pattern that contributes to the formation of a robust micronetwork structure. A full set of shield muck in situ pulping equipment is independently developed, thereby establishing an integrated grout production process. Considering the Suzhou Metro Line 6 as an engineering case, a field industrialization experiment is conducted, and the results demonstrate that the pulping system operates smoothly and can stably produce grouts. Compared with conventional cement-based finished grout, the newly developed synchronous grouting material with an optimal formulation exhibits significant superiorities in terms of surface deformation control (average reduction of 30∼40%), segment attitude control, and anti-seepage effect. The proposed approach effectively realizes in-situ resource utilization and source reduction of shield muck and can significantly reduce the cost of synchronous grouting. Aligned with the dual carbon strategy, the prospects for widespread adoption of this approach are promising, and the results of this study are highly significant.

Laboratory Tests on Performance of Waste‐Clay‐Brick‐Powder Cement Grouting Materials for Ground Improvement in Mine Goaf

Feasibility study and performance optimization of sand-based cemented paste backfill materials

Experimental Research on Application of Waste Concrete Powder–Waste Brick Powder–Cement Grout for Foundation Reinforcement in Mining Goaf

Utilization of Waste Brick Powder as a Partial Replacement of Portland Cement in Mortars

Efficient use of ceramic waste powder in Cementitious Grout for the Development of Sustainable Semi-Flexible Pavement Surfaces

Experimental Study on Ratio and Performance of Coal Gangue/Bottom Ash Geopolymer Double-Liquid Grouting Material

Hydration and Hardening Properties of High Fly-Ash Content Gel Material for Cemented Paste Backfill Utilization

Research on the preparation and diffusion characteristics of coal seam bottom fracture grouting material based on solid waste synergy

Effect of clay fraction on the mechanical properties and microstructural characteristics of waste rock fine-based brick

Utilizing waste geopolymer powder as partial cement replacement for sustainable cement mortar: Micro-macro properties and modification

Effect of Slag Gypsum Binder as a Substitute to Cement on the Stability of Backfill Mining

The Effect of Wetting–Drying Cycles on the Deterioration of the Physical and Mechanical Properties of Cemented Paste Backfill in Open-Pit Coal Mines

Basic Properties and Engineering Application of Bentonite-Cement-Water Glass Grouting

Sustainable Cement Stabilization of Plastic Clay Using Ground Municipal Solid Waste: Enhancing Soil Properties for Geotechnical Applications

Production of a new type of cemented paste backfill with solid waste from carbide slag, soda residue, and red mud: mechanism, optimization, and its environmental effects

Performance comparison of geopolymer and clay-cement grouting pastes and goaf effect evaluation of grouting backfilling method

Synthesis of cemented paste backfill by reutilizing multiple industrial waste residues and ultrafine tailings: Strength, microstructure, and GA-GPR prediction modeling

Reusing waste clay brick powder for low-carbon cement concrete and alkali-activated concrete: A critical review

Use of recycled gypsum in the cement-based stabilization of very soft clays and its micro-mechanism

In situ resource reutilization of earth pressure balance (EPB) shield muck for the generation of novel synchronous grouting materials

Study on Performance Optimization of Water-Rich Grouting Materials Based on Response Surface Methodology