Abstract:NH4Cl corrosion failure often occurs in the overhead systems of hydrotreaters, and this failure is always accompanied by the appearance of H2S. A combination of electrochemical and surface spectroscopic (SEM/EDS, AFM, XRD) techniques was used to investigate the effect of different factors, including the surface roughness, temperature, dissolved oxygen, pH and H2S concentration, on the corrosion behavior of carbon steel in an NH4Cl environment with the presence of H2S. The effect of H2S concentrations (at the ppm level) on the corrosion behavior of carbon steel was systematically revealed. The experimental results clearly indicated that the corrosion rate reached a minimum value at 10 ppm H2S. The steel surface was covered by a uniform corrosion product film in a 10 ppm H2S environment, and the corrosion product film was tight and protective. The ammonia from NH4Cl helped maintaining the protectiveness of the corrosion films in this environment. Dissolved oxygen mainly accelerated the cathodic reaction. The cathodic limiting current density increased with increasing temperature, and the anodic branch polarization curves were similar at different temperatures. The anodic current density decreased as the pH decreased, and the cathodic current density increased as the pH decreased. The absolute surface roughness (R (a)) of carbon steel increased from 132.856 nm at 72 h to 153.973 nm at 144 h, and the rougher surface resulted in a higher corrosion rate. The critical innovation in this research was that multiple influential factors were revealed in the NH4Cl environment with the presence of H2S.

Pitting Corrosion of Supermartensitic Stainless Steel in Chloride Solutions Containing Thiosulfate or H2S

Corrosion Behavior of Tubing in High-Salinity Formation Water Environment Containing H2S/CO2 in Yingzhong Block

Corrosion Behavior of AISI 316L Stainless Steel in a Highly Sour Environment

Electrochemical characterization of 13Cr low-carbon martensitic stainless steel - corrosion study with a mini-cell setup

Unraveling the effect of H2S on the corrosion behavior of high strength sulfur-resistant steel in CO2/H2S/Cl− environments at ultra high temperature and high pressure

Electrochemical Properties of Passive Film Formed on Supermartensitic Stainless Steel in a Chloride Medium

Study On The Electrochemical Behavior Of The Weldment For Spv50q Steel In H2s-Containing Environment

In situ evaluation of sensitization in the heat affected zone of supermartensitic stainless steel welded with superduplex filler metal

CORROSION PROPERTIES OF SPV50Q STEEL IN H2S-CONTAINING SOUR ENVIRONMENT

Pitting Corrosion Behavior of 316l Stainless Steel in the Media of Sulphate-Reducing and Iron-Oxidizing Bacteria

Electrochemical corrosion behavior of stainless steel in dilute hydrochloric acid media containing SO4 2- ions

Effect of sulfate and meta-silicate ions on pitting corrosion of stainless steel-316 in chloride containing simulated coal gasifier aqueous effluents

Effect of CO2/H2S and Applied Stress on Corrosion Behavior of 15cr Tubing in Oil Field Environment

Corrosion of Carbon Steel in a Tropical Marine Environment Enhanced by H2S from Sargassum Seaweed Decomposition

Corrosion Behavior of X52 Anti-H2S Pipeline Steel Exposed to High H2S Concentration Solutions at 90 °C

Effects of H2S/HS− on Stress Corrosion Cracking Behavior of X100 Pipeline Steel Under Simulated Sulfate-Reducing Bacteria Metabolite Conditions

A Study on the Corrosion Behavior of Carbon Steel Exposed to a H2S-Containing NH4Cl Medium

Stress Corrosion Cracking of Metals and Alloys in Aggressive H2S–CO2–Cl– Environments

Hydrogen Sulfide Corrosion of Metal Equipment in Oil and Gas Field

Stress corrosion cracking behavior and mechanism of super 13Cr stainless steel in simulated O2/CO2 containing 3.5 wt% NaCl solution

Corrosion-Mechanical Properties and Susceptibility to Hydrogenetaion of Pipe Steel in the Presence of Carbon Dioxide Gas and Hydrogen Sulphide in Environment