Abstract:Highly-conductive nanostructures may be dispersed into phase change materials (PCM) to improve their effective thermal conductivity, thus leading to colloidal systems that are referred to as nanostructure-enhanced PCM (NePCM). Results of a theoretical and experimental investigation on freezing of NePCM in comparison to the base PCM are presented. A one-dimensional Stefan model was developed to study the unidirectional freezing of NePCM in a finite slab. Only the thermal energy equation was considered and the presence of static dispersed nanoparticles was modeled using effective media relations. A combination of analytical and integral methods was used to solve this moving boundary problem. The elapsed time to form a given thickness of frozen layer was therefore predicted numerically. A cooled-from-bottom unidirectional freezing experimental setup was designed, constructed, and tested. Thermocouple readings were recorded at several equally spaced locations along the freezing direction in order to monitor the progress of the freezing front. As an example, cyclohexane (C6H12) and copper oxide (CuO) nanoparticles were chosen to prepare the NePCM samples. The effective thermophysical and transport properties of these samples for various particle loadings (0.5/3.8, 1/7.5, and 2/14.7 vol. %/wt. %) were determined using the mixture and Maxwell models. Due to utilization of the Maxwell model for thermal conductivity of both phases, the numerical predictions showed that the freezing time is shortened linearly with increasing particle loading, whereas nonmonotonic expediting was observed experimentally. The maximum expediting was found to be nearly 8.23% for the 0.5 vol. % sample. In the absence of a nanoparticle transport model, the mismatch of the cold plate boundary conditions, lack of accurate thermophysical properties, especially in the solid phase of NePCM samples and precipitation issues with 2 vol. % samples were addressed by improving the experimental setup. Through adopting a copper cold plate, utilizing measured thermal conductivity data for both phases and using 1, 2, and 4 wt. % samples, good agreement between the experimental and numerical results were realized. Specifically, adoption of measured thermal conductivity values for the solid phase in the Stefan model that were originally underestimated proved to be a major cause of harmony between the experiments and predictions. [DOI: 10.1115/1.4006305]

Dispersing different nanoparticles in paraffin wax as enhanced phase change materials

Phase Change Materials of Paraffin in H-Bn Porous Scaffolds with Enhanced Thermal Conductivity and Form Stability

Thermal Energy Storage Performance of Paraffin-Based Composite Phase Change Materials Filled with Hexagonal Boron Nitride Nanosheets

Experimental Investigation of Heat Storage and Heat Transfer Rates During Melting of Nano-Enhanced Phase Change Materials (nepcm) in a Differentially-Heated Rectangular Cavity

A Theoretical and Experimental Investigation of Unidirectional Freezing of Nanoparticle-Enhanced Phase Change Materials

Experimental investigation of stability and thermal conductivity of phase change materials containing pristine and functionalized multi-walled carbon nanotubes

Thermal characteristics enhancement of Paraffin Wax Phase Change Material (PCM) for thermal storage applications

Experimental Study of the Thermal Properties of a Homogeneous Dispersion System of a Paraffin-based Composite Phase Change Materials

Preparation and thermophysical property analysis of nanocomposite phase change materials for energy storage

Preparation and thermophysical properties of nanoparticle-in-paraffin emulsion as phase change material

Enhanced thermal energy storage of a paraffin-based phase change material (PCM) using nano carbons

Molecular Dynamics Simulation of Nanoparticle Effect on Melting Enthalpy of Paraffin Phase Change Material

Thermo-physical properties of paraffin wax with iron oxide nanoparticles as phase change material for heat storage applications

Optimization of Thermal Conductivity and Latent Heat Capacity Using Fractional Factorial Approach for the Synthesis of Nano‐Enhanced High‐Performance Phase‐Change Material

Comparative study on the effect of surface-modified nanoparticles on PCM for solar energy applications

Enhancing the performance of thermal energy storage by adding nano-particles with paraffin phase change materials

The Experimental Exploration of Nano-Si3n4/paraffin on Thermal Behavior of Phase Change Materials

Nanoparticles to Enhance Melting Performance of Phase Change Materials for Thermal Energy Storage

Experimental investigation of the effect of rotating magnetic field on the melting performance enhancement of paraffin/nano-Fe 3 O 4 composite phase change material

Enhancing Heat Capacity of Colloidal Suspension Using Nanoscale Encapsulated Phase-Change Materials for Heat Transfer.

Nano Engineered Paraffin-Based Phase Change Material for Building Thermal Management