Abstract:High-pressure die casting (HPDC) is a widely used process with short cycle times to manufacture complex shapes of aluminium castings for the automotive industry. Most of the die casting companies use specialized commercial software to simulate molten metal filling and solidification. This approach works satisfactorily and is industrially accepted for defect prediction capability. Die cooling is an effective technique to reduce internal porosity in die cast components. But die cooling process is not completely captured in the approach used in the casting simulations. This often resulted in false positives in the defect predictions. One of the main reasons for the lack of precision in simulation is the uncertainty in assigning the boundary conditions such as heat transfer coefficients (HTC) for the die cooling channel. In this study, a coupled simulation strategy was developed to determine accurate HTC values of the die cooling channel. The computational domain was divided into two sub-domains, i.e. , casting zone and die cooling zone. Two different industrially accepted simulation tools were used: (a) for casting simulation and (b) for turbulent fluid flow and heat transfer simulation in the cooling channel. A series of iterations were performed by exchanging information at the interface between the two sub-domains till the convergence was achieved. Experiments were also conducted with a thermocouple inserted in the die and the actual die temperature readings were measured. The converged simulation results agreed well with the experimental measurements. Also, the influence of flow rate on HTC was studied by conducting experiments with two different flow rates and the castings produced were analyzed with the help of CT scan analysis, micro-structure evaluation and thermal imaging. The obtained results demonstrated the efficacy of the method adopted in prescribing the values of heat transfer conditions in casting simulations. With the coupled simulation approach developed in this work, parametric studies were conducted to maximize the heat removal rate from a given die, for different flow velocities, nozzle diameters, cooling hole diameters and nozzle-to-surface spacings.

Experimental study on interfacial heat-transfer coefficients at the casting/die interface in squeeze casting under transient condition

Evaluation of heat-transfer coefficients at the casting/die interface in squeeze casting

Experimental Study on the Heat Transfer Behavior and Contact Pressure at the Casting-Mold Interface in Squeeze Casting of Aluminum Alloy

Study on the Relationship Between Interfacial Heat Transfer Coefficient and Interface Pressure in Squeeze Casting by Using Microscopic Contact Model

Measurement of Temperature Inside Die and Estimation of Interfacial Heat Transfer Coefficient in Squeeze Casting

Study on Heat Transfer Behavior at Metal/Die Interface in Aluminum Alloy Die Casting Process - I. Experimental Study and Determination of the Interfacial Heat Transfer Coefficient

Determination Of The Metal/Die Interfacial Heat Transfer Coefficient And Its Application In Evaluating The Pressure Distribution Inside The Casting During The High Pressure Die Casting Process

STUDY OF INTERFACIAL HEAT TRANSFER COEFFI-CIENT BETWEEN METAL AND DIE DURING HIGH PRESSURE DIE CASTING PROCESS OF ALUMINUM ALLOY ADCl2Z

A Study on Heat Transfer at Metal/Die Interface During High Pressure Die Casting of AM60B Alloy

Spatial interfacial heat transfer and surface characteristics during gravity casting of A356 alloy

Study on the effect of die coating thickness on the interfacial heat transfer coefficient in squeeze casting of aluminum alloy

Investigation and Application of Inverse Determination of Interfacial Heat Transfer Coefficient in Vacuum Investment Casting

Effect of solidification pressure on the interface heat transfer coefficient in counter-gravity casting

Study on Interfacial Heat Transfer Coefficient at Metal/die Interface During High Pressure Die Casting Process of AZ91D Alloy

Analysis of interfacial heat transfer coefficients in squeeze casting of AA6061 aluminum alloy with H13 steel die: Impact of section thickness on thermal behavior

Study of Flow and Heat Transfer in High Pressure Die Casting Cooling Channel

Determination of Interfacial Heat Transfer Coefficient and Its Application in High Pressure Die Casting Process

Determination of the Interfacial Heat Transfer Coefficient at the Metal-Sand Mold Interface in Low Pressure Sand Casting

Effects of Alloy Materials and Process Parameters on the Heat Transfer Coefficient at Metal/Die Interface in High Pressure Die Casting

Influence of Processing Parameters on Interfacial Heat Transfer Coefficient at the Metal-Die Interface of Die Cast Am50 Alloy

Determination of the Heat Transfer Coefficient at Metal–die Interface of High Pressure Die Casting Process of AM50 Alloy