Abstract:Carbon nanotubes (CNTs) have attracted considerable attention due to their unique structure, remarkable properties, and their potential for a variety of applications, since their discovery by Iijima in 1991.The nanotube's high field enhancement, high aspect ratios, small tip radii of curvature and high current density make it a nearly ideal electron source for field emission. This paper discusses the production of CNTs produced by cathode self-heated CVD,so that the segment heated in growth is achieved and the temperature is controllable. Unlike the conventional method using silicon as substrates, molybdenum substrates are used. As the conductivity of silicon is not good, there are two techniques to deal with it: One is to use either p-doped or n-doped silicon as substrates. The other is to deposit metal contact layers on pristine silicon. However, using metal, like Mo, brings simplicity to the fabrication.Two kinds of catalysts are compared: sub-nanometer Fe and Al/ Fe bilayer catalyst films. In the same synthesis conditions, different catalysts are utilized to get different CNTs. Field emission characteristics of CNTs with Fe catalyst and CNTs with Al/Fe catalysts are discussed. Results show that emission properties of CNTs with Al/Fe catalysts are better. Also, results demonstrate that the emission current is determined not only by the morphology of CNTs, but also how the CNTs adhere to the electrode below. Good adhesion between CNTs and the substrate leads to easier transmission of electrons from electrodes to the bottom of CNTs. Aging process increased the field emission current of the CNT cathode.

Field Emission of Multi-Walled Carbon Nanotubes from Pt-Assisted Chemical Vapor Deposition

In-situ studies of electron field emission of single carbon nanotubes inside the TEM

Growth of Aligned Multiwall Carbon Nanotubes and the Effect of Adsorbates on the Field Emission Properties

Plasma Enhanced Chemical Vapour Deposited Carbon Nanotubes for Field Emission Applications

Study of Multi-Walled Carbon Nanotube Structures Fabricated by PMMA Suspended Dispersion

Field emission energy distribution studies of single multi-walled carbon nanotube emitter with gas adsorptions

Field emission from aligned multi-walled carbon nanotubes

Carbon Nanotubes As Field Emission Sources

Carbon Nanotubes And Their Potential Field Emission Applications

Chemical Vapor Deposition Growth of Multi-Walled Carbon Nanotubes on Metallic Substrates

Growth and Field Emission of Coiled Carbon Nanotubes by Plasma-Enhanced Chemical Vapor Deposition

Large Current Emission from Carbon Nanotubes on Metal Substrates by Chemical-Vapor Deposition

Enhancement of Field Emission of CNTs Array by CO2-assisted Chemical Vapor Deposition.

Lateral Field Emitters Fabricated Using Carbon Nanotubes

Field emission and thermo-electrochemical cell performances of various types of carbon nanotubes

Field Emission From Short And Stubby Vertically Aligned Carbon Nanotubes

Field Emission of Carbon Nanotubes Grown on Carbon Cloth

Field emission of carbon nanotubes grown on nickel substrate

Fabrication of Large Current Density Carbon Nanotube Based Field Emitters

Epitaxial growth of multiwall carbon nanotube from stainless steel substrate and effect on electrical conduction and field emission.

Enhanced Field Electron Emission Properties of Hybrid Carbon Nanotubes Synthesized by RF‐PECVD