Abstract:The study aims to explore the feasibility of using low-frequency ultrasonic washing to pre-concentrate iron values in waste bauxite residue (BR) containing 32.60 wt. % iron. This novel approach involves ultrasonication followed by water-washing to pre-concentrate iron before reduction-roasting of BR. Conventional reduction-roasting of BR is more expensive compared to pre-concentrated BR, making this method potentially cost-effective. The process consists of a two-stage ultrasonic treatment procedure. In the first stage, ultrasonication at 30 °C, with 40% solid content (w/v) for 30 min, improves the iron grade to 41.2 wt. % with 82% recovery. However, a second stage of ultrasonication is necessary to further upgrade the iron. The study optimized the ultrasonication time, temperature, solid content (%, w/v), and water washing parameters. Under optimal conditions (ambient temperature, 30% solid content (w/v), 45 min of ultrasonication), the iron grade reached 49.1 wt. % (Fe 2 O 3 70.2) with 66% recovery. Water-washing parameters were found to be less effective compared to ultrasonication parameters. The settling time after water washing significantly affects the grade and recovery of the product. The ultrasonic effect on the BR particle surface leads to the breakage of surface-alkali coating and the disintegration of locked particles to generate free iron and other particles. Particle size analysis supports the disintegration of BR particles into smaller pieces. The physicochemical characterizations of different products were carried out using ICP-OES, XRD, FTIR, and FESEM studies to support the experimental findings. The possible iron separation mechanism is discussed utilizing available literature, as well as experimental and characterization evidence.

Iron Recovery from Bauxite Residue Through Reductive Roasting and Wet Magnetic Separation

Developing a Low-Temperature, Carbon-Lean Hybrid Valorisation Process for Bauxite Residue (Red Mud) Towards Metallic Fe and Al Recovery

Recovery of iron from high-iron red mud using suspension magnetization roasting and magnetic separation

Disc Magnetic Separator Applied to the Extraction of Magnetite in Bauxite Residue

High-Iron Bauxite Residue (Red Mud) Valorization Using Hydrochemical Conversion of Goethite to Magnetite

Iron Recovery from Red Mud Using Carbothermic Roasting with Addition of Alkaline Salts

Application of suspension magnetization roasting as technology for high-efficiency separation of valuable iron minerals from high-iron bauxite

Greek "red mud" residue: a study of microwave reductive roasting followed by magnetic separation for a metallic iron recovery process

Recovery of iron from pyrite cinder by suspension magnetization roasting-magnetic separation method: Process optimization and mechanism study

Separation and Recovery of Iron and Nickel from Low-Grade Laterite Nickel Ore by Microwave Carbothermic Reduction Roasting

Study on Iron Extraction from High Iron Bauxite Residue by Pyrite Reduction

Green and Efficient Utilization of Ferruginous Gibbsite Ore and Ferruginous Manganese Ore by Synergetic Carbothermic Co-Reduction–Magnetic Separation Process

Recovery and separation of rare earths and boron from spent Nd-Fe-B magnets

Ultrasonic-assisted pre-concentration of iron values in bauxite residue suitable for reduction-roasting purpose

Clean utilization of high-iron red mud by suspension magnetization roasting

Improved iron recovery from low-grade iron ore by efficient suspension magnetization roasting and magnetic separation

Synergetic Utilization of Zinc-Bearing Dust by Carbothermic Reduction-Roasting Process: Phase Transformation and Morphological Evolution

Clean recycling of low-grade refractory limonitic waste using suspension magnetization roasting coupled with magnetic separation: A semi-industrial approach towards a waste utilization plan

The Utilization of Bauxite Residue with a Calcite-Rich Bauxite Ore in the Pedersen Process for Iron and Alumina Extraction

An Novel Method for Iron Recovery from Iron Ore Tailings with Pre-Concentration Followed by Magnetization Roasting and Magnetic Separation

Recovery of Scandium, Aluminum, Titanium, and Silicon from Iron-Depleted Bauxite Residue into Valuable Products: A Case Study