Abstract:Developing effective carbon materials for post-combustion CO(2)capture (PCC) has received great attentions over many recent years, owing to their desirable adsorption-desorption performance and exceptional thermo-oxidative stability compared to virtually any other capture materials typically the wide array of amine-based sorbent materials. However, due to the nature of physical adsorption, virtually none of the carbon materials reported so far can be practically used for PCC applications without deep flue gas cooling to ambient or even lower temperatures in order to achieve appreciable levels of CO(2)uptake capacities at low CO(2)partial pressures. Here, we present a category of 3D hierarchical molecular sieving carbon architectures that are able to operate at realistic flue gas temperatures with exceedingly high reversible CO(2)capacities. The breakthrough CO2-sieving carbon materials are prepared from using a cost-effective and commercially widely available precursor of polymeric polyisocyanurates with a facile one-step compaction-activation methodology. Tested at sensible flue gas temperatures of 40-70 degrees C and a low CO(2)partial pressure of 0.15 bar, the best performing materials are found to have exceedingly high reversible CO(2)capacities of up to 2.30 mmol g(-1)at 40 degrees C and 1.90 mmol g(-1)at 70 degrees C. Advanced characterisations suggest that the unique geometry and chemistry of the easily available precursor material coupled with the characteristics of the compaction-activation protocol used are responsible for the CO2-sieving structures and capacities of the 3D carbon architectures. The findings essentially change the general perception that carbon-based materials can hardly find applications in post-combustion capture due to their low CO(2)uptake capacity at low CO(2)partial pressures and realistic flue gas temperatures.

Adsorption of carbon dioxide and water vapor on fly-ash based ETS-10

Design and development of 3D hierarchical ultra-microporous CO2-sieving carbon architectures for potential flow-through CO2 capture at typical practical flue gas temperatures

Carbon dioxide capture by functionalized solid amine sorbents with simulated flue gas conditions.

Enhanced Tolerance to Flue Gas Contaminants on Carbon Dioxide Capture Using Amine-Functionalized Multiwalled Carbon Nanotubes

Cost-effective carbon-based amine adsorbents for carbon capture: Equilibrium, kinetics and selectivity

Microporous Carbon Coated Zeolite Particles for Efficient Carbon Capture from Wet Flue Gas

Utilizing silica fume and synthetically produced mesoporous silicas for simulated flue gas CO2 adsorption

CO2 high-temperature sorbent (Al, Fe, Ti) CO-doped Li4SiO4 from fly ash-derived SiO2 aerogel: In-situ synthesis, enhanced capture ability and long cycle stability

Fly ash-derived mesoporous silica with large pore volume for augmented CO 2 capture

Performance study of moisture swing adsorption membrane for CO_2 capture from ambient air

Amine‐modified acid‐activated attapulgite as efficient and stable adsorbents for CO2 capture from flue gas

Adsorption of Wet Dilute Carbon Dioxide on an Amine-Based Resin Sorbent: Static and Dynamic Experiments

Competitive Adsorption of Moisture and SO2 for Carbon Dioxide Capture by Zeolites FAU 13X and LTA 5A

A Study on the Mechanisms of Coal Fly Ash to Improve the CO2 Capture Efficiency of Calcium-Based Adsorbents

CO 2 capture using low silica X zeolite synthesized from low-grade coal gangue via a two-step activation method

Green Synthesis of Nanosilica from Coal Fly Ash and Its Stabilizing Effect on CaO Sorbents for CO 2 Capture.

Facile fabrication of mesoporosity silica as support for solid amine CO2 adsorbents with enhanced adsorption capacity and kinetics

Direct Air Capture of CO2 Using Bi-Amines-functionlized Hierarchical Mesoporous Silica: Effects of Organic Amine Loading, Moisture and Temperature

CO2 capture on aminosilane functionalized alumina-extracted residue of catalytic gasification coal ash

Easily-synthesized and low-cost amine-functionalized silica sol-coated structured adsorbents for CO2 capture

The further activation and functionalization of semicoke for CO2 capture from flue gases