Abstract:In this paper, a well designed experimental study comprising undrained cyclic triaxial and bender element tests was carried out on five sand-silt mixtures with three grain size ratios ( R d ) and three sand uniformity coefficients ( C us ). The results reveal that at given fines content (FC) and void ratio, the liquefaction resistance (CRR) of the mixtures decreases as R d increases from 9.7 to 27.8 or C us from 1.50 to 4.46, and the CRR of the mixture at the highest R d or C us becomes as low as nearly 50% of that at the lowest R d or C us . The equivalent relative density ( D r *) based on the binary packing theory can be utilized to capture the coupled effects of host sand gradation and FC on the CRR of sand-silt mixtures. A novel finding is that a universal relationship exists between the liquefaction resistance and the shear modulus normalized by the minimum void ratio function of host sand ( G N ') for different FCs, initial effective confining pressures, sample preparation methods (SPMs), and host sand gradations. Based on the comprehensive laboratory test data, the empirical CRR 15 - G N ' correlation is proposed and further adjusted for the field liquefaction triggering analysis based on the shear wave velocity (V s ). Soil can be considered non-liquefiable when its equivalent shear wave velocity exceeds 225 m/s or the applied cyclic stress ratio (CSR) is below 0.088. Comparisons with the previously established liquefaction triggering boundary curves validate the applicability of the proposed curve for initial evaluation of the liquefaction resistance of sandy soils, indicating laboratory studies can complement in-situ investigations for V s -based liquefaction assessment.

Liquefaction Screening—Non-plastic Silty Sands and Sands

Energy-based Assessment of Cyclic Liquefaction Behavior of Clean and Silty Sand under Sustained Initial Stress Conditions

Characterizing the Liquefaction Potential and Pore Pressure Generation of Silty Sands Through the Energy-Based Approach in the Framework of Critical State Soil Mechanics

Cyclic Failure Characteristics of Silty Sands with the Presence of Initial Shear Stress

Influences of fines content on cyclic resistance ratio of fines-sand-gravel mixtures

A New Index for Evaluating Liquefaction Resistance of Soil under Combined Cyclic Shear Stresses

Liquefaction resistance and small strain stiffness of silty sand: Effects of host sand gradation and fines content

Comparison of Cyclic Liquefaction Behavior of Clean and Silty Sands Considering Static Shear Effect

Assessing the Bearing Capacity of Backfills by Stress Wave Velocity and Cone Penetration Resistance

Undrained Response and Liquefaction Resistance of Sand–Silt Mixtures

A New Parameter to Evaluate Liquefaction Resistance of Saturated Sand under Complex Dynamic Stress Paths

Verification of the Soil-Type Specific Correlation between Liquefaction Resistance and Shear-Wave Velocity of Sand by Dynamic Centrifuge Test

Influence of Particle-Size Disparity on Cyclic Liquefaction Resistance of Silty Sands

Applicability of soil‐type index for shear wave velocity‐based liquefaction assessment

Undrained cyclic response of a dense saturated sand with various grain sizes and contents of nonplastic fines: Experimental analysis and constitutive modeling

Correlation Between Liquefaction Resistance and Shear Wave Velocity of Granular Soils: a Micromechanical Perspective

Small-strain shear modulus and liquefaction resistance of calcareous sand with non-plastic fines

Cyclic Behaviors of Saturated Sand-Gravel Mixtures under Undrained Cyclic Triaxial Loading

Undrained Fragility of Clean Sands, Silty Sands, and Sandy Silts

Shear wave velocity-based liquefaction resistance evaluation: semi-theoretical considerations and experimental validations

Effects Of Particle Shape On The Liquefaction Resistance Of Sands