Abstract:Purpose: CoRISMA MCS Systems Inc (Hamden CT) is developing an innovative mechanical circulatory support system (CMCS) as a durable therapeutic option for heart failure (HF) patients. The CMCS system is comprised of an axial flow pump, non-contacting hydrodynamic bearings, and integrated DC motor designed to be fully implantable in a left atrial (LA) to aortic (Ao) configuration; this unloading strategy may be particularly beneficial for HF patients with preserved ejection fraction (HFpEF). The small (5.5 cm3), lightweight (20 g), and low power (5-7 W) device design should allow for a less invasive off-pump implant. We present early-stage engineering development and testing of the prototype CoRISMA pumps. Methods: Computational fluid dynamics (CFD) modeling was performed to evaluate flow and shear in two impeller (3 blades, 0.5 mm thickness, 8.9 mm diameter, 0.15 mm gap, polished titanium) and diffusor (5 blades, polished titanium) candidate designs. Test apparatuses were custom built to expedite development of the impeller/diffuser designs and iteratively refine the CFD models. Two candidate impeller/diffusor designs were fabricated and tested in each of the two test apparatuses (n = 4 impeller/diffuser + test fixture configurations) in static mock flow loops (hydrodynamic H-Q curves, 3.5 cP glycerol solution at 37 °C), and in dynamic mock flow loops (hemodynamics, 3.5 cP glycerol solution at 37 °C) tuned to HF conditions (mean aortic pressure 50 mmHg, central venous pressure 15 mmHg, aortic flow 3.0 L/min, and heart rate 80 bpm). Results: CFD predicted flows of 4.56 L/min and 4.82 L/min at 100 mmHg for impellers/diffusers 1 and 2, respectively. Impeller 2 required less torque to generate a 6% increase in fluidic flow, and the diffuser had a larger area of high pressure, indicative of lower friction, which likely contributed to the increased efficiency. Experimental testing for all four configurations in the static and dynamic mock loops met performance metrics as evidenced by generating 4.0-4.5 L/min flow against 70-76 mmHg pressure at 25,000 rpm and restoring hemodynamics in the dynamic mock flow loop (MAP = 80 mmHg, CVP = 0 mmHg, total flow = 5.5 L/min) from baseline simulated HF test conditions. Conclusion: These results demonstrate proof-of-concept of the early engineering design and performance of the prototype CoRISMA pumps. Engineering specifications, challenges observed, and proposed solutions for the next design iteration were identified for the continued development of an effective, reliable, and safe LA-to-Ao CMCS system for HF patients. Current design plans are underway for incorporating a wireless energy transfer system for communication and power, eliminating the need for and complications associated with an external driveline, to achieve a fully-implantable system.

Corrugated diaphragm shape design study for hemocompatible pulsatile ventricular assist devices

Evaluation of the Hemolysis and Fluid Dynamics of a Ventricular Assist Device under the Pulsatile Flow Condition

Computational fluid dynamic simulations of a cavopulmonary assist device for failing Fontan circulation

Robust shape optimization of the FDA blood pump

Cora valveless pulsatile rotary pump: new design and control

Computational Fluid Dynamics As a Tool in the Development Process of Left Ventricular Assist Devices

CFD analysis of the HVAD's hemodynamic performance and blood damage with insight into gap clearance

Optimized Biomechanical Design of a Pulsatile Fontan Conduit for Congenital Heart Palliation

Cora rotary pump for implantable left ventricular assist device: biomaterial aspects

New methods for the development of pneumatic displacement pumps for cardiac assist

A cavalpulmonary assist device utilising impedance pumping enhanced by peristaltic effect

Harnessing Mechanical Instabilities in the Development of an Efficient Soft Pump for an Artificial Heart Ventricle Simulator

Design and Simulation of Patient-Specific Tissue-Engineered Bifurcated Right Ventricle-Pulmonary Artery Grafts using Computational Fluid Dynamics

Left Ventricular Hemodynamics with an Implanted Assist Device: An In Vitro Fluid Dynamics Study

Hemodynamical Evaluation of a New Surgically Implanted Pulsatile Right Ventricular Assist Device Driven by a Conventional Intra-Aortic Balloon Pump Console

Early-stage Development of the CoRISMA Mechanical Circulatory Support (CMCS) System for Heart Failure Therapy

A Novel Hybrid Membrane VAD as First Step Toward Hemocompatible Blood Propulsion

In vitro testing of an intra-ventricular assist device.

Blood Pump Design Variations and Their Influence on Hydraulic Performance and Indicators of Hemocompatibility

Design and evaluation of a pulsatile flow rotary vane blood pump