Abstract:Abstract Membrane distillation (MD) is a promising technology for treating high-salinity mine water. However, MD membranes are known to have low membrane flux and are prone to fouling. In this study, we used the cost-effective and controllable vapor-induced phase separation (VIPS) technology to prepare polyvinylidene difluoride (PVDF) membranes, replacing the traditional immersion precipitation method and optimizing the membrane structure by including LiCl and acetone as porogen in the casting solution. The results showed that the membrane prepared using the VIPS method exhibited a highly open interconnected porous surface. Unlike traditional MD membranes with a dense epidermal layer and large finger-like pores, these optimized membranes had a symmetrical and uniform internal structure, leading to a high flux of 8.62 kg·(m 2 ·h) −1 during direct contact membrane distillation testing. Different porogens produced varied results on the VIPS process and varying effects on membrane structure. The use of LiCl promoted the formation of PVDF β-phase, resulting in a decrease in the number of spherical nodules on the membrane surface, as well as improved density and smoothness. Consequently, this reduced fouling risk during membrane distillation while slightly decreasing membrane flux. On the other hand, acetone rapidly evaporated during the VIPS process, facilitating pre-gelatinization and α-phase formation of PVDF. This concurrent effect effectively restricted excessive nodule growth on the membrane surface, endowing the membrane with antifouling capabilities while preserving high flux.

Effect of VIPS fabrication parameters on the removal of acetic acid by supported liquid membrane using a PES–graphene membrane support

Removal of acetic acid from aqueous solution by polyethersulfone supported liquid membrane

Recovering Ethyl Acetate from Aqueous Solution Using P(VDF-co-HFP) Membrane Based Pervaporation

Efficiency of Fabricated Adsorptive Polysulfone Mixed Matrix Membrane for Acetic Acid Separation

Effect of pore forming agents on the properties and performance of the supported liquid membrane for levulinic acid separation

Separation of Acetic Acid from Water by Pervaporation with Polydimethylsiloxane/polyether Sulfone Composite Membrane

Pervaporation behavior and integrated process for concentrating lignocellulosic ethanol through polydimethylsiloxane (PDMS) membrane

Pervaporation Separation of Ethanol from Aqueous Solution by PDMS Membranes Crosslinked with VTES

Separation properties and fouling resistance of polyethersulfone membrane modified by fungal chitosan

Preparation and characterization of an antifouling poly (phenyl sulfone) ultrafiltration membrane by vapor-induced phase separation technique

The Effect of Concentration on PES/NMP System on Flat Sheet Membrane Fabrication and its Performance for CO2 Gas Separation

Performance of PES Membrane Contactor on the Separation of Dilute Acetic Acid from Aqueous Forms

Morphology and characteristics of polyethersulfone membrane modified with polyethylene glycol hexadecyl ether and nanocarbon

Removal of bisphenol A by adsorption mechanism using PES-SiO2 composite membranes

The effect of activated carbon nanoparticles (ACNPs) on characterization and mechanical properties of polyethersulfone (PES) ultrafiltration membranes

Pervaporation of acetic acid/water mixtures through carbon molecular sieve-filled PDMS membranes

Effect of Different Solvents, Pore-Forming Agent and Solubility Parameter Differences on the Properties of PES Ultrafiltration Membrane

Preparation and performance of acrylic acid grafted PES ultrafiltration membrane via plasma surface activation

Preparation of PES ultrafiltration membrane for treatment of emulsified oily wastewater: Effect of solvent and non-solvent on morphology and performance

Preparation and modification of PVDF membrane via VIPS method for membrane distillation

Tailoring the properties of carbon molecular sieves membranes for the separation of propionic acid from aqueous solutions