Abstract:Interest in mobile chemical sensors is on the rise, but significant challenges have restricted widespread adoption into commercial devices. To be useful these sensors need to have a predictable response, easy calibration, and be integrable with existing technology, preferably fitting on a single chip. With respect to integration, the CMOS imager makes an attractive template for an optoelectronic sensing platform. Demand for smartphones with cameras has driven down the price and size of CMOS imagers over the past decade. The low cost and accessibility of these powerful tools motivated us to print chemical sensing elements directly on the surface of the photodiode array. These printed colorimetric microdroplets are composed of a nonvolatile solvent so they remain in a uniform and homogeneous solution phase, an ideal medium for chemical interactions and optical measurements. By imaging microdroplets on the CMOS imager surface we eliminated the need for lenses, dramatically scaling down the size of the sensing platform to a single chip. We believe the technique is generalizable to many colorimetric formulations, and as an example we detected gaseous ammonia with Cu(II). Limits of detection as low as 27 ppb and sensor-to-sensor variation of less than 10% across multiple printed arrays demonstrated the high sensitivity and repeatability of this approach. Sensors generated this way could share a single calibration, greatly reducing the complexity of incorporating chemical sensors into mobile devices. Additional testing showed the sensor can be reused and has good selectivity; sensitivity and dynamic range can be tuned by controlling droplet size.

A 1-V 2.6-mW Environmental Compensated Fully Integrated Nose-on-a-Chip

Multiplexed Chemical Sensing CMOS Imager.

A Low-Power Electronic Nose Signal-Processing Chip for a Portable Artificial Olfaction System

A Portable Electronic Nose Intended for Home Healthcare Based on a Mixed Sensor Array and Multiple Desorption Methods

A wearable Electronic Nose SoC for healthier living

A miniaturized electronic nose with artificial neural network for anti-interference detection of mixed indoor hazardous gases

Wireless Sensing System-on-Chip for Near-Field Monitoring of Analog and Switch Quantities

Ultra-Low-Power Smart Electronic Nose System Based on Three-Dimensional Tin Oxide Nanotube Arrays

A battery-free, wireless, flexible bandlike e-nose based on MEMS gas sensors for precisely volatile organic compounds detection

A Low Noise CMOS Readout Based on a Polymer-Coated SAW Array for Miniature Electronic Nose

A Programmable Interface Circuit for MOS Gas Sensor Array

CMOS single-chip gas detection system comprising capacitive, calorimetric and mass-sensitive microsensors

Ultralow-Power Single-Sensor-Based E-Nose System Powered by Duty Cycling and Deep Learning for Real-Time Gas Identification

E-Nose System Based on Ultra-Low Power Single Micro-LED Gas Sensor and Deep Learning

A Microdroplet-based Colorimetric Sensing Platform on a CMOS Imager Chip.

Fully integrated ultra-sensitive electronic nose based on organic field-effect transistors

Monolithically and Vertically Integrated Environmental Sensing Hub with Novel Air-Based Humidity Sensor Design

Monolithic Integrated CMOS-MEMS Fluorescence Quenching Gas Sensor and Resistive Temperature Detector (RTD) for Temperature Compensation

An On-Chip Microarray Platform for Material-Temperature Optimization and Gas Discrimination

Implementation of a monolithic soc environmental sensing hub using cmos-mems technique