Abstract:OBJECTIVE: This study aimed to reconstruct 11 motor vehicle crashes (6 with thoracolumbar fractures and 5 without thoracolumbar fractures) and analyze the fracture mechanism, fracture predictors, and associated parameters affecting thoracolumbar spine response.METHODS: Eleven frontal crashes were reconstructed with a finite element simplified vehicle model (SVM). The SVM was tuned to each case vehicle and the Total HUman Model for Safety (THUMS) Ver. 4.01 was scaled and positioned in a baseline configuration to mimic the documented precrash driver posture. The event data recorder crash pulse was applied as a boundary condition. For the 6 thoracolumbar fracture cases, 120 simulations to quantify uncertainty and response variation were performed using a Latin hypercube design of experiments (DOE) to vary seat track position, seatback angle, steering column angle, steering column position, and D-ring height. Vertebral loads and bending moments were analyzed, and lumbar spine indices (unadjusted and age-adjusted) were developed to quantify the combined loading effect. Maximum principal strain and stress data were collected in the vertebral cortical and trabecular bone. DOE data were fit to regression models to examine occupant positioning and thoracolumbar response correlations.RESULTS: Of the 11 cases, both the vertebral compression force and bending moment progressively increased from superior to inferior vertebrae. Two thoracic spine fracture cases had higher average compression force and bending moment across all thoracic vertebral levels, compared to 9 cases without thoracic spine fractures (force: 1,200.6 vs. 640.8 N; moment: 13.7 vs. 9.2 Nm). Though there was no apparent difference in bending moment at the L1-L2 vertebrae, lumbar fracture cases exhibited higher vertebral bending moments in L3-L4 (fracture/nonfracture: 45.7 vs. 33.8 Nm). The unadjusted lumbar spine index correctly predicted thoracolumbar fracture occurrence for 9 of the 11 cases (sensitivity = 1.0; specificity = 0.6). The age-adjusted lumbar spine index correctly predicted thoracolumbar fracture occurrence for 10 of the 11 cases (sensitivity = 1.0; specificity = 0.8). The age-adjusted principal stress in the trabecular bone was an excellent indicator of fracture occurrence (sensitivity = 1.0; specificity = 1.0). A rearward seat track position and reclined seatback increased the thoracic spine bending moment by 111-329%. A more reclined seatback increased the lumbar force and bending moment by 16-165% and 67-172%, respectively.CONCLUSIONS: This study provided a computational framework for assessing thoracolumbar fractures and also quantified the effect of precrash driver posture on thoracolumbar response. Results aid in the evaluation of motor vehicle crash-induced vertebral fractures and the understanding of factors contributing to fracture risk.

Prediction of the Segmental Pelvic Ring Fractures Under Impact Loadings During Car Crash

Three-dimensional finite element simulation of pelvic fracture during side impact with pelvis–femur–soft tissue complex

BIOMECHANICAL RESPONSE AND INJURY OF OCCUPANT'S PELVIS IN SIDE IMPACTS: EFFECTS OF THE FEMORAL HEAD AND LOADING CONDITIONS

Finite Element Study of Human Pelvis Model in Side Impact for Chinese Adult Occupants

Development of a biofidelic computational model of human pelvis for predicting biomechanical responses and pelvic fractures

A Numerical Investigation into the Influence of Hip Posture on Occupant Pelvis Fracture in Vehicle Frontal Impact

Effects of Loading Conditions on the Pelvic Fracture Biomechanism and Discrimination of Forensic Injury Manners of Impact and Run-Over Using the Finite Element Pelvic Model

Prediction of Long Bone Fractures via Reconstruction of Pedestrian Accidents Using Multi-Body System and FE Models

Biomechanical Response of the Pelvis Femur Complex under Lateral Pelvic Impacts During Sideways Falls

Simulating Pelvis Kinematics from Belt and Seat Loading in Frontal Car Crash Scenarios: Important Boundary Conditions that Influence the Outcome

Computational modeling and analysis of thoracolumbar spine fractures in frontal crash reconstruction

AN INVESTIGATION OF BIOMECHANICAL MECHANISMS OF OCCUPANT FEMUR INJURIES UNDER COMPRESSION-BENDING LOAD

Movement posture and injury pattern of pelvis-lumbar spine of seated human impacted by the vertical high loads: a finite element analysis

Dynamic Simulation of Biomechanical Behaviour of the Pelvis in the Lateral Impact Loads.

A FINITE ELEMENT ANALYSIS OF PELVIC RING RECONSTRUCTION WITH FIBULAR AUTOGRAFT FOLLOWING PERIACETABULAR TUMOR RESECTION

Injury prediction in a side impact crash using human body model simulation

Simulative investigation of the required level of geometrical individualization of the lumbar spines to predict fractures

Study on Physiological Injuries of Occupants under Vertical Impact Loads

EFFECT OF MATERIAL MODEL SELECTION ON LATERAL IMPACT SIMULATIONS OF PELVIC COMPLEX

Prediction of skull fractures in blunt force head traumas using finite element head models

Dynamic response and material sensitivity analysis of pelvic complex numerical model under side impact.