Abstract:Transparent conductive CuCrO2 oxide films were prepared on sapphire substrates by the sol–gel method using copper (II) acetate monohydrate and chromium (III) nitrate hydrate as raw materials. The highly c-axis orientation and optical transparency (60–80%) in the visible region were obtained. The microstructure, vibration modes, optical and electrical transport properties as a function of annealing temperatures have been systematically discussed. With increasing annealing temperature, the crystalline quality and the c-axis orientation of CuCrO2 films were improved, which induced the increase of Raman phonon amplitude with the decrease of the linewidth. But the film compactness and density decrease with the increase of average particle size. In order to study the intrinsic mechanism of the optical response behavior, a three-phase layered structure (air/film/substrate) was applied to simulate the transmittance spectra of CuCrO2 films. Three electronic transitions can be uniquely assigned and it is found that the direct transitions are the dominant effect for CuCrO2 optical properties. The temperature dependence of electrical conductivity was studied and the electrical conduction mechanisms of the thermal activation behavior and the three-dimensional variable range-hopping transport were observed. In addition, the conductivity of CuCrO2 films decreases with increasing annealing temperature induced by its microstructure and the grain boundary scattering. Thus, the film annealed at 600 °C has the largest electrical conductivity of 0.49 S m−1 at room temperature. The present results could be crucial and provide theoretical support for future applications of p-type semiconductor and optoelectronic devices.

Effect of solvent–vapour annealing on morphology, structure of copper(II) phthalocyanine thin films and device performance

EFFECT OF ANNEALING ON THE CuInS2 THIN FILMS PREPARED BY CHEMICAL BATH DEPOSITION

The Effect of Thermal Annealing of Mo Film on the CuInSe2 Layer Texture and Device Performance

In Situ Preparation and Determination of Electrochemical and Electrochromic Properties of Copper Phthalocyanine-Polyaniline Nanocomposite Films

Investigation of nanoscale morphological changes in organic photovoltaics during solvent vapor annealing

Quantitative Nanoscale Monitoring the Effect of Annealing Process on the Morphology and Optical Properties of Poly(3-Hexylthiophene)/[6,6]-phenyl C61-butyric Acid Methyl Ester Thin Film Used in Photovoltaic Devices

Understanding the thermal-annealing-generated stable structure of phthalocyanine derivative/polymer bicomponent systems through scanning tunneling microscopy and density functional theory calculations

Morphology and Efficiency Enhancements of PTB7-Th:ITIC Nonfullerene Organic Solar Cells Processed Via Solvent Vapor Annealing

Deposition-Pressure-Induced Optimization of Molecular Packing for High-Performance Organic Thin-Film Transistors Based on Copper Phthalocyanine

Optical and Photoelectric Properties of Copper Phthalocyanine/Cadmium Sulphide Multilayer Films Prepared by Vacuum Sublimation

Effect of Heat Treatment on the Property of Cuins2 Thin Film Prepared by Chemical Bath Deposition

Effect of Solvents on Morphology and Size of CdS Nanoparticles via a Solvothermal Route

Solvent-vapor Induced Self-Assembly of a Conjugated Polymer: A Correlation Between Solvent Nature and Transistor Performance

Optimization of the thermoelectric performance of layer-by-layer structured copper-phthalocyanine (CuPc) thin films doped with hexacyano-trimethylene-cyclopropane (CN6-CP)

Phase composition of the earth-abundant Cu2SnS3 thin films with different annealing temperature and its effects on the performance of the related solar cells

Morphological, Optical, and Electronic Consequences of Coexisting Crystal Orientations in β-Copper Phthalocyanine Thin Films

Performance Improvement of Blue Thermally Activated Delayed Fluorescence OLEDs Via Vapor Annealing by High Boiling Point Solvent

Effect of triethanolamine complexing agent and thermal annealing on the physicochemical properties of CuS thin films

Effect of Crystalline Microstructure on the Photophysical Performance of Polymer/Perylene Composite Films

The effect of post-deposition annealing conditions on structural and thermoelectric properties of sputtered copper oxide films

Effect of annealing temperature on structural, optoelectronic properties and interband transitions of CuCrO2 nanocrystalline films prepared by the sol–gel method