Abstract:Lithium metal anode is recognized as the "Holy Grail" electrode because of its high specific capacity (3860 mAh/g) and low reduction potential (-3.04 V vs. standard hydrogen electrode), which is meaningful for batteries systems. Remarkable improvement of ionic conductivity of sulfide electrolyte exceeding 10 mS/cm at room temperature has opened up the opportunity to realized the commercialization of lithium metal anode. However, the practical implement of Li anode in solid-state batteries is hundered by the poor cycle stability and the low energy efficiency stemming from the unstable interfaces due to the ultrahigh reactivity of lithium metal. At the anode interface, the lithium dendrite growth and solid electrolytes (SE) reduction by lithium metal are serious challenges for lithium metal anode. To suppress the interfacial reactions and lithium dendrite formation at the sulfide electrolyte/Li metal anode interface, various strategies have been implemented by researchers, such as in situ formed robust SEI (solid electrolyte interface), surface modification and SE modification, etc. In this article, we focus on the artificial solid electrolyte interface (ASEI) to strengthening the Li metal and solid electrolyte interface. We fabricate the uniform LiF-rich ASEI using CF3(CF2)(3)OCH3 by heating at a temperature of 150 degrees C for 6 h. LiF layer at the interface between Li and sulfide electroyte could prevent Li dendrite growth. Compared to the Li/sulfide electrolyte interface, the Li/LiF/sulfide electrolyte interface is more stable. The symmetrical cell LiF@Li//Li6PS5Cl//LiF@Li (LiF@Li//LPSCl//LiF@Li) does not short-circuit after 40 cycles at the current density of 0.1 mAh/cm(2) with a lower polarization potential. A solid-state battery LiNbO2@LiCoO2//LPSCl//LiF@Li (LNO@LCO//LPSCl//LiF@Li) employing LiF coated Li metal as anode shows a high reversible discharge capacity of 138.4 mAh/g at 0.05 C and retains 110.9 mAh/g after 50 cycles. This interficial engineering for lithium metal and sulfide solid electrolyte provides new opportunity to commercialize the Li metal batteries.

A Facile Surface Passivation Method to Stabilized Lithium Metal Anodes Facilitate the Practical Application of Quasi‐Solid‐State Batteries

A Bifunctional Composite Artificial Solid Electrolyte Interphase for High Stable Solid-State Lithium Batteries

Engineering Wavy‐Nanostructured Anode Interphases with Fast Ion Transfer Kinetics: Toward Practical Li‐Metal Full Batteries

In Situ Surface Film Formed by Solid‐State Anodic Oxidation for Stable Lithium Metal Anodes

Integrated lithium metal anode protected by composite solid electrolyte film enables stable quasi-solid-state lithium metal batteries

Interficial Engineering of Lithium Metal Anode for Sulfide Solid State Batteries

A facile surface chemistry route to a stabilized lithium metal anode

Ultrathin LiF-rich solid electrolyte interphase for stable long-life cycling stabilization of lithium metal anodes

Stabilization of Lithium Metal Interfaces by Constructing Composite Artificial Solid Electrolyte Interface with Mesoporous TiO2 and Perfluoropolymers

In‐Situ Constructing a Mixed‐Conductive Interfacial Protective Layer for Ultra‐Stable Lithium Metal Anodes

A Self‐Reconfigured, Dual‐Layered Artificial Interphase Towards High‐Current‐Density Quasi‐Solid‐State Lithium Metal Batteries

Surface Fluorination of Reactive Battery Anode Materials for Enhanced Stability.

Armoring lithium metal anode with soft–rigid gradient interphase toward high-capacity and long-life all-solid-state battery

Artificial Interphases for Highly Stable Lithium Metal Anode

A Solution‐Processable High‐Modulus Crystalline Artificial Solid Electrolyte Interphase for Practical Lithium Metal Batteries

A Facile Way to Construct Stable and Ionic Conductive Lithium Sulfide Nanoparticles Composed Solid Electrolyte Interphase on Li Metal Anode

Fluorinated Interface Layer with Embedded Zinc Nanoparticles for Stable Lithium-Metal Anodes.

Stable Lithium Plating and Stripping Enabled by a LiPON Nanolayer on PP Separator

Stable lithium metal anode enabled by a robust artificial fluorinated hybrid interphase

Dendrites‐Free Lithium Metal Anode Enabled by Synergistic Surface Structural Engineering

In-situ constructed polymer/alloy composite with high ionic conductivity as an artificial solid electrolyte interphase to stabilize lithium metal anode