Abstract:Multi-layer fabrics are commonly used in ballistics shields with a lower bulletproof class to protect against pistol and revolver bullets. In order to additionally limit the dynamic deflection of the samples, layers reinforced with additional materials, including non-Newtonian fluids compacted by shear, are additionally used. Performing a wide range of tests in each case can be very problematic; therefore, there are many calculation methods that allow, with better or worse results, mapping of the behavior of the material in the case of impact loads. The search for simplified methods is very important in order to simplify the complexity of numerical fabric models while maintaining the accuracy of the results obtained. In this article, multi-layer composites were tested. Two samples were included in the elements subjected to shelling. In the first sample, the outer layers consisted of aramid fabrics in a laminate with a thermoplastic polymer matrix. The middle layer contained a non-Newtonian shear-thickening fluid enclosed in hexagonal (honeycomb) cells. The fluid was produced using polypropylene glycol and colloidal silica powder with a diameter of 14 µm in the proportions of 60/40. The backing plate was made using a 12-layer composite made of Twaron® para-aramid fabrics with a DCPD matrix-not yet used in a wide range of ballistics. Then, numerical simulations were carried out in the Abaqus/Explicit dynamic analysis. The Johnson-Cook constitutive strength model was used to describe the behavior of elastic-plastic materials constituting the elements of the projectiles. For the non-Newtonian fluid, a Up-Us EOS was used. The inner layers of the fabric were treated as an orthotropic material. Complete homogenization of the sample layers was carried out, thanks to which each layer was treated as a homogeneous continuum. As a parameter of fracture mechanics for shield components, the strain criterion was used with the smooth particles hydrodynamics method (SPH). Then, the results of simulations were compared with the results of the ballistic test for both samples placed next to each other, which resulted in the formation of a multi-layer composite in one ballistic test subjected to impact loads during firing with a 9 × 19 mm Parabellum FMJ projectile with an initial velocity of 370 ± 10 m/s. The results of numerical tests are very similar to the ballistic tests, which indicates the correct mapping of the process and the correct conduct of layer homogenization. The applied proportions of the components in the non-Newtonian fluid allowed a reduction in the deflection compared to previous studies. Additionally, the proposal to use a DCPD matrix allowed to obtain a much lower deflection value compared to other materials, which is a novelty in the field of production of ballistic shields.

Experimental analyzing the static puncture resistance performance of shear thickening fluid impregnated polypropylene hybrid composite target structures for armour application

Research on anti-penetration performance of composite armor of steel/composite materials

Static puncture resistance characteristics with various indenter nose shape geometry perforation of shear thickening fluid impregnated polypropylene fabric for soft armour application

Dynamic/quasi-static Stab-Resistance and Mechanical Properties of Soft Body Armour Composites Constructed from Kevlar Fabrics and Shear Thickening Fluids

A Computational Analysis of the High-velocity Impact Performance of Lightweight 3D Hybrid Composite Armors

Experimental Investigations on Shear Thickening Fluids as "Liquid Body Armors": Non-Conventional Formulations for Ballistic Protection

Design and Ballistic Performance of Hybrid Plates Manufactured from Aramid Composites for Developing Multilayered Armor Systems

Soft Armor Materials Constructed with Kevlar Fabric and a Novel Shear Thickening Fluid

An Armour-Piercing Projectile Penetration in a Double-Layered Target of Ultra-High-performance Fiber Reinforced Concrete and Armour Steel: Experimental and Numerical Analyses

Properties of Kevlar Fabric Composites Reinforced by STF Composed of Monodisperse Polystyrene Microspheres

Study on the enhancement mechanism of ballistic properties of shear thickening fluid impregnated aramid fabric composite plates

Anti-ballistic properties of hybrid UHMWPE fiber-reinforced composite armour

Multi-Layer Fabric Composites Combined with Non-Newtonian Shear Thickening in Ballistic Protection-Hybrid Numerical Methods and Ballistic Tests

Studies on the stab resistance and ergonomic comfort behaviour of multilayer STF-treated tri-component woven fabric and HPPE laminate composite material

The ballistic performance of STF impregnated Kevlar fabric coating GFRP composite structure

Stab-Resistant Performance of the Well-Engineered Soft Body Armor Materials Using Shear Thickening Fluid

Enhancement Data In Term Of Material Selection And Design Consideration For Bulletproof Vest

Experiment Study on Anti-Penetration Peformance of Liquid Composite Armor to Shapedcharged Jet

Investigation of high‐strain rate behavior of shear thickening fluid encapsulated electrospun ultra‐high molecular weight polyethylene/high‐density polyethylene fiber composites by split‐Hopkinson pressure bar

Investigations of the ballistic response of hybrid composite laminated structures

Dynamic Response of UHMW-PE Composite Armors under Ballistic Impact of Blunt Projectiles