Abuse of steroidal drugs by homoeopaths and hakims. 1981.

N. Din,C. Khan,M. Burney

Abstract:

What problem does this paper attempt to address?

Anti-impact Behavior of a Novel Soft Body Armor Based on Shear Thickening Gel (STG) Impregnated Kevlar Fabrics

Chunyu Zhao,Chenhui Xu,Saisai Cao,Shouhu Xuan,Wanquan Jiang,Xinglong Gong

DOI: https://doi.org/10.1088/1361-665x/ab21f7

IF: 4.1

2019-01-01

Smart Materials and Structures

Abstract:A novel Kevlar/STG (Kevlar fabrics immersed with shear thickening gel) fabrics composite with high anti-impact performance was fabricated. By utilizing a unique multi-sensor force testing system, both low- and high-velocity impact experiments were conducted to investigate the anti-impact performance of Kevlar/STG fabrics. In low-velocity testing, the attenuation of the impact center force for Kevlar/STG was 64.1%, which was much larger than the Kevlar (27.0%). Under high-velocity loading, the impact force of Kevlar/STG attenuated from 805 N to 223 N with the increase of layers from 5-layers to 20-layers, while they reduced from 1125 N to 460 N for Kevlar fabrics. Meanwhile, the failure mode was analyzed and it was found that the high anti-impact performance was originated from the shear thickening effect and enhanced friction. In consideration of the good flexibility and excellent safe guarding property, the Kevlar/STG showed promising perspective in body armor.
Experimental analysis of the impact protection properties for Kevlar® fabrics under different orientation layers and non-Newtonian fluid compositions

Thiago F Santos,Caroliny M Santos,Rubens T Fonseca,Kátia M Melo,Marcos S Aquino,Fernando R Oliveira,José I Medeiros

DOI: https://doi.org/10.1177/0021998320916231

IF: 3.191

2020-04-07

Journal of Composite Materials

Abstract:Use of colloidal silica suspensions impregnated in Kevlar® fabrics is new avant-garde of protection equipment for stab wounds and piercing objects. Kevlar® fabrics impregnated with non-Newtonian fluids have been used for protection against sharp blows, mainly due to their lightweight, good flexibility, and superior resistance properties. The aims of this investigation are to demonstrate that Kevlar® fabric impregnated with shear thickening fluids could be improved its performance through the use Aminopropyltrimethoxysilane, as well as by increasing the concentration of silica nanoparticles in its composition. Friction tests on yarns showed that Kevlar® yarns with shear thickening fluids (sample C3—25% Silica and 75%polyethylene glycol with 38% aminopropyltrimethoxysilane), presented higher strength values (10.5 N) when compared with other samples. Impact resistance tests showed that Kevlar® samples with highest concentration shear thickening fluids nanoparticles and oriented fabric layers (C3 OR) presented better performance regarding to penetration depth of stabs P1 (17 mm), S1 (18 mm) and as well as residual energy dissipation, when compared with the standard and other samples. Addition of shear thickening fluids cause reduction in the flexibility of the Kevlar® fabrics, producing sample with 42.74% less flexibility than the standard sample (C3). Adhesion tests for C3 samples exhibited more stable wettability and spreading rate, i.e., a greater adhesion of shear thickening fluids in Kevlar® fabrics than other samples due to its composition (higher concentration of nanoparticles and superior amount of silane agent). Finally, results showed that the shear thickening fluids composition as well as Kevlar® layers orientation should be used to improve the performance of Kevlar® fabrics under impact tests.

materials science, composites
Experimental analyzing the static puncture resistance performance of shear thickening fluid impregnated polypropylene hybrid composite target structures for armour application

S. Deepak,D. Thirumalaikumarasamy,M. Ashokkumar,S. K. Nayak

DOI: https://doi.org/10.1080/00405000.2022.2037230

2022-02-11

Abstract:The challenges of today’s protective material developers' requirements for body armour target structure design, strength, stiffness, and light weight structures have historically come from composite structures having high cost, complex manufacturing, and time-consuming process. Hence, there is a need to identify suitable alternate materials with reliable composites and essential design requirements for high impact armour structures. At present, hybrid composite structures are increasingly utilized in armour structure developments because they offer quick adoption to produce low cost, high impact strength, and a methodology for easy and quick manufacturing process without compromising the performance of traditional composite structures. This experimental analysis reports that the prepared hybrid composite target structures are composed of woven polypropylene fabric impregnated with single, double, and triple layers with a prepared shear thickening fluid (STF) concentration (50 vol% silica dispersed in polyethylene glycol 600 g/mol) used as a core layer in this structure and a neat/silica gel coated aluminum face sheet is used as the skin material. The prepared STF is characterized through rheological analysis exhibits shear thickening behavior reveals that extensively depends on silica particle morphology, volume fraction, and particle size distribution. The prepared hybrid composite target structure test results demonstrate a significant enhancement in tensile strength, modulus, better peel resistance properties, and puncture resistance evaluated in different geometry of projectiles like flat, hemispherical, elliptical, and conical indentor penetration velocity at 500 mm/min have been performed to demonstrate the improvements in the target structure. It enhances the performance layer thickness increases with increasing puncture resistance for all indentors sequently identified and penetration damage of target structures varied with respect to indentor nose head surface area of contacts.
Graphene Reinforced Multiphase Shear Thickening Fluid for Augmenting Low Velocity Ballistic Resistance

Unsanhame Mawkhlieng,Abhijit Majumdar,Debarati Bhattacharjee

DOI: https://doi.org/10.1007/s12221-021-0163-2

IF: 2.5

2021-01-01

Fibers and Polymers

Abstract:The impact resistance of panels made from p-aramid (Kevlar®) fabrics was improved by treating them with multiphase shear thickening fluids (STF) containing only 0.2 %, 0.4 % and 0.6 % graphene nanoplatelets. The multiphase STFs showed enhanced peak viscosity than their pure counterpart, signifying better shear thickening. The yarn pull-out force increased (25 %) in multiphase STF treated fabrics as compared to that of pure STF treated fabrics. The dynamic impact resistance also improved (6.5 % to 19.7 %) in multiphase STF treated fabrics. Finally, multiphase STF treated fabric panels demonstrated superior ballistic resistance, against low velocity ballistic impact (165±10 m/s) in terms of either energy absorption or number of bullets stopped.

materials science, textiles,polymer science
Study on the enhancement mechanism of ballistic properties of shear thickening fluid impregnated aramid fabric composite plates

Yan Zhang,Lijun Chang,Jiawen Xu,Taiwei Chen,Zhengyu Mao,Zhihua Cai

DOI: https://doi.org/10.1002/pc.28201

IF: 5.2

2024-02-23

Polymer Composites

Abstract:Ballistic properties of bulletproof plate prepared by impregnating aramid fabric with shear thickening fluid were enhanced. This study proposes a process for the preparation of composite laminates using the shear thickening fluid (STF) impregnated aramid fabric and presents some fabric panel configuration strategies. Firstly, this study prepared two kinds of STF using 20 nm and 500 nm silica particles. Then, the STF‐impregnated Kevlar fabrics were laminated and hot‐pressed to form the fabric panels. After that, the ballistic performance of the fabric panels was evaluated by firing the 9 mm steel core projectile using a gas gun. The ballistic tests showed that the ballistic performance of the hybridized configuration panels using STF‐20 treated fabrics as the front panels and STF‐500 treated fabrics as the backing panels was superior, with a reduction of 36.1%–37.6% in the number of perforated layers (4.7–5 layers) compared to a single STF‐treated panel. This study provides a new idea and method for applying STF in protective equipment. Highlights Shear thickening fluid (STF) and aramid fabric are better combined by hot pressing lamination process; The ballistic properties of fabric panels are significantly improved by hybrid configuration; The ballistic performance enhancement mechanism of composite bulletproof plate was revealed.

materials science, composites,polymer science
An Experimental Investigation on Dynamic Behaviors of Shear Thickening Fluid Impregnated Aramid Fabrics for Different Number of Layers

Ali İmran Ayten,Alper Kaşgöz

DOI: https://doi.org/10.1007/s12221-024-00742-x

IF: 2.5

2024-10-16

Fibers and Polymers

Abstract:Shear thickening fluid (STF) is a solution performs an increase under shear stress. This study investigates rheological behavior of STF, then its effectiveness against dynamic loadings for the case it is applied on aramid fabric. Polyethylene glycol 200 and 400 g/mol, and Aerosil 200, 300, 380 were used for preparation of STF. Rheological analysis was performed to determine thickening behavior and parameters for the solutions having 5, 10 and 20% silica concentrations by weight. The solution having optimum shear thickening performance for dynamic impact loading was selected and it was impregnated aramid fabric to prepare low velocity impact and ballistic test samples. Low velocity impact experiments were executed for different number of layers from 1 to 8 at different energy levels to obtain absorbed energy and maximum contact force values. A curve fitting equation was derived for absorbed energy and number of layers of aramid fabric. Finally, Level IIA ballistic test was done to test whether the curve fitting equation is effectively working or not. Additionally, STF impregnated aramid fabric with its neat counterpart against ballistic impact was compared. A detailed ballistic test characterization was performed including the last shape of ammo. It is determined that impregnation of STF has important effects on ballistic behavior of aramid fabric.

materials science, textiles,polymer science
Stab-Resistant Performance of the Well-Engineered Soft Body Armor Materials Using Shear Thickening Fluid

Rubin Wei,Bin Dong,Wen Zhai,Hui Li

DOI: https://doi.org/10.3390/molecules27206799

IF: 4.6

2022-10-12

Molecules

Abstract:Stab-resistant body armor can effectively prevent sharp instruments from attacking the protected parts and reduce the threat to human bodies. Shear thickening fluid (STF) is a kind of smart material with variable viscosity and its viscosity can change significantly with external stimuli. The soft and adaptive characteristics of STF provide a new idea for improving the performance of stab-proof materials. In this work, three kinds of soft anti-stabbing materials were designed and prepared with aramid, poly–p–phenylene benzodioxazole (PBO), and carbon fiber fabrics impregnated with STF. Quasi-static puncture tests and dynamic impact tests were conducted to compare the performance of different anti-stabbing structures. The results showed that the peak piercing force of the STF-treated fabrics in the puncture testing was greatly increased than that of neat samples. Against the D2 knife, the maximum impact load of STF/PBO fiber fabric was increased from 55.8 N to 72.9 N, increasing by 30.6%. Against the D3 spike, the maximum impact load of STF/aramid fabric was increased from 128.9 N to 254.7 N, increasing by 197.6%. The mechanical properties of fibers were important factors for the resistance to knives, and the fabric structure was the key point to bear the spike. Optical photographs of fabric fractures and scanning electron microscope analysis indicated that the STF effectively limited the slip of the fiber bundle when the tool penetrated the fabric, which played a positive role in maintaining the tightness and integrity of the fabric structure.

chemistry, multidisciplinary,biochemistry & molecular biology
Enhanced dynamic stab resistance and UV-resistance of flexible and lightweight Kevlar fabrics impregnated with multi-phase shear thickening fluid

Danyang Li,Ting Liu,Jie Zhang,Nibin Qian,Zhenqian Lu,Chuntao Chang,Rui Wang,Qi Xiao,Jian Qi,Feifei You

DOI: https://doi.org/10.1016/j.jmrt.2024.01.268

IF: 6.267

2024-03-01

Journal of Materials Research and Technology

Abstract:Multifunctional smart soft armor materials always among the relentless pursuits of scientists to meet the demand of extreme environments. In this study, a novel dynamic stab resistance material owned ultraviolet (UV) resistance property constructed with Kevlar fabrics impregnated with a multi-phase shear thickening fluid (STF) composed of SiO2 and TiO2 nanoparticles as disperse phase was fabricated. The rheology test showed that the shear thickening effect displayed stronger with the concentration of TiO2 in STF (TSTF) increasing. Moreover, compared with STF, the addition of 16 % TiO2 in STF induced a prominent enhancement in peak viscosity from 550.81 to 3143.29 Pa s. Based on the favorable shear thickening performance of TSTF, the dynamic stab resistance property of the optimal TSTF/Kevlar (TSK) was increased 1.43 folds than that of neat Kevlar (NK). Furthermore, after 168 h UV irradiation, the peak stab force and dissipation energy of the optimal one were 698.43 N and 16.92 J retained 85.95 % and 86.24 %, which was 2.96 and 3.22 folds than that of UV-NK. This multi-functional composite material with the performance of resisting both stab impact and UV in extreme environments had broad application prospects in the field of lightweight protection.

materials science, multidisciplinary,metallurgy & metallurgical engineering
Conductive Shear Thickening Gel/kevlar Wearable Fabrics: A Flexible Body Armor with Mechano-Electric Coupling Ballistic Performance

Chunyu Zhao,Yunpeng Wang,Saisai Cao,Shouhu Xuan,Wanquan Jiang,Xinglong Gong

DOI: https://doi.org/10.1016/j.compscitech.2019.107782

IF: 9.1

2019-01-01

Composites Science and Technology

Abstract:This work reported a novel conductive shear thickening gel-Kevlar fabrics (c-STG/Kevlar) body armor material which possessed both anti-impact performance and dynamic mechano-sensing behavior. Due to the excellent shear thickening effect, the c-STG/Kevlar showed a higher safeguarding property than the neat Kevlar. Under low-velocity drop tower loading, the maximum center force of c-STG/Kevlar was only 5768 N, which was nearly half of the neat Kevlar (11414 N). During the high-velocity ballistic testing, the monolayer c-STG/Kevlar sample could absorb 21.6% impact energy. The c-STG/Kevlar displayed a mechano-electric coupling character since the electrical resistance of the c-STG/Kevlar was linearly dependent on the external impacts. A possible sensing mechanism was proposed and it was found that the impact damages could be evaluated by the resistance variation. Finally, an in situ impact-sensing helmet was obtained by using c-STG/Kevlar, which indicated that the above smart fabrics had wide potential in next generation body armor materials and wearable devices.
Impact Resistance of Shear Thickening Fluid/kevlar Composite Treated with Shear-Stiffening Gel

Qianyun He,Saisai Cao,Yunpeng Wang,Shouhu Xuan,Pengfei Wang,Xinglong Gong

DOI: https://doi.org/10.1016/j.compositesa.2017.12.019

2018-01-01

Composites

Abstract:In this work, shear-stiffening gel (STG) was introduced into shear thickening fluid (STF)-impregnated-Kevlar® woven fabric (Kevlar/STF) to improve the impact resistance. The STF filled within the yarns of Kevlar and the STG covered the Kevlar/STF to form Kevlar/STF/STG composite. The STG in the Kevlar/STF/STG not only protected STF but also improved the impact resistance of the fabric because of its excellent shear-stiffening characteristics. A series of experiments including the yarn pull-out test, the split Hopkinson pressure bar impact test, rod penetration test, and knife cutting test were carried out to verify the enhancement effect. The improvement mechanism of the impact resistance for the Kevlar/STF/STG was studied. Under the similar anti-impact performance, the Kevlar/STF/STG possessed lower weight than the Kevlar and its strong impact resistance originated from the synergetic effect among the STF, STG and Kevlar. Therefore, the Kevlar/STF/STG exhibited broad potential in the soft body armor.
Study on dynamic and static tensile and puncture-resistant mechanical properties of impregnated STF multi-dimensional structure Kevlar fiber reinforced composites

Yangshuo Liu,Xingyong Gao,Mingjiang Han,Huanan Wei,Hao Luo

DOI: https://doi.org/10.1515/phys-2024-0065

2024-01-01

Open Physics

Abstract:Abstract Shear thickening fluid (STF)-impregnated Kevlar fabric can be used as “Liquid armor” for the protection of weapons and equipment. The concentration of dispersed phase in STF and the fabric structure are important factors that affect the mechanical properties of composites. To obtain the mechanical properties of Kevlar fabric impregnated with STF, nano-sized silicon dioxide particles (SiO 2 ) and Polyethylene glycol were used as dispersing phase and dispersing medium, respectively, by impregnating Kevlar fabrics with 2D planar and three-dimensional (3D) angular interlock structure, fiber-reinforced composite fabrics impregnated with STF with different physical structures were obtained. The results show that the shear thickening behavior of STF is the most obvious when the concentration of STF is 60%. In addition, fabric structure and STF concentration play an active role in the mechanical properties of STF/Kevlar fiber reinforced composites. Compared with pure Kevlar fabric, the maximum tensile load and the maximum puncture load of the three-dimensional angular interlocking structure of STF/Kevlar fiber reinforced composites are increased by more than 13,000 N and 120 N, respectively. The research results can provide theoretical support for the mechanical properties of STF/Kevlar fiber-reinforced composites and individual protection research.

physics, multidisciplinary
The ballistic performance of STF impregnated Kevlar fabric coating GFRP composite structure

Enling Tang,Wei Zhang,Ruizhi Wang,Yafei Han,Chuang Chen,Mengzhou Chang,Kai Guo,Liping He,Enling TangWei ZhangRuizhi WangYafei HanChuang ChenMengzhou ChangKai GuoLiping HeKey Laboratory of Transient Physical Mechanics and Energy Conversion Materials of Liaoning Province,Shenyang Ligong University,Shenyang,China

DOI: https://doi.org/10.1080/15376494.2024.2321477

2024-02-29

Mechanics of Advanced Materials and Structures

Abstract:The shear thickening fluid (STF) impregnated Kevlar fabric coating glass fiber reinforced plastic (GFRP) composite structure has both wearing comfort and high protective ability, which will provide guidance for the development of new protective products. In this study, STF with SiO 2 mass fraction of 34% was prepared, the quasi-static/dynamic mechanical behavior of STF, Kevlar and STF impregnated Kevlar fabric coating GFRP were carried out by the high-speed impact experiments, respectively. At the same time, the damage characteristics and energy absorption properties of the composite structure are analyzed by integrating experimental data with numerical simulation. The results showed that the composite structure makes the energy absorption capacity of GFRP improved. STF impregnated 4 layers of Kevlar fabric coating GFRP composite structure was impacted by the projectile at a speed of 244 m/s, and the composite structure consumes 1.54 times the energy of single GFRP laminates. The resistance of composite structures can be improved by placing more layers of Kevlar fabric behind GFRP laminates. The evaluation of the target's bullet resistance cannot solely rely on the energy consumed by the projectile. A portion of the energy is transferred to the obstacle that impedes the target's motion.

materials science, multidisciplinary,mechanics, composites, characterization & testing
Preparation and characterization of shear thickening fluid/carbon nanotubes/Kevlar composite materials

Chunrui Lu,Siqi Li,Xue Lu,Ji Ma,Wenlong Ma,Xiaodong Wang,Shuhong Ba

DOI: https://doi.org/10.1002/pc.27978

IF: 5.2

2023-12-03

Polymer Composites

Abstract:Illustration of the procedures and samples for preparing CNT/STF/Kevlar composite: (A) procedures and (B) samples. Shear thickening fluid (STF), carbon nanotubes (CNTs) are both promising in body protection and anti‐impact for the drastic viscosity change of STF and the extremely high tensile strength and elongation of CNTs. The excellent performance of the above two combined with traditional Kevlar fabrics can significantly improve the mechanical properties and reduce the number of layers used for body protection. This work reports a new method to prepare STF/CNTs/Kevlar with excellent tensile properties and anti‐impact performance by spraying method with 1 wt% polyvinyl alcohol (PVA) solution as a binder for better integration between CNTs and Kevlar. Surface morphology changes in the preparation process indicate the combined structure of PVA binder, CNTs, and STF, presenting a uniform macroscopic and nonuniform microscopic surface of STF/CNTs/Kevlar composite. The tensile strength and anti‐impact properties including punch residual velocity and energy absorbed were studied and results for STF/CNTs/Kevlar composite are 669.8 ± 18.1 MPa, 1.602 ± 0.045 m/s, and 21.683 ± 1.182 J in 12 ms, increased by 46.4%, 23.0%, and 240.2%, respectively, compared with neat Kevlar, owing to the improved tight bonding and friction between fabrics yarns caused by PVA adhesive and tangled CNTs, accompanied with the enhanced viscosity of STF under forces. Highlights Composites were made by spraying PVA, CNTs, and STF onto Kevlar fabrics; The tensile strength of the composite was 46.4% higher than Kevlar; The energy absorbed in 12 ms in anti‐impact tests was improved by 240.2%; Tight bonding and friction between yarns are reasons to improve properties; The raised viscosity of STF under forces is useful for mechanical properties.

materials science, composites,polymer science
Synthesis and characterization of monodispersed silica‐based shear thickening fluid for impact resistance applications

Nitin Kumar,Swati Bishnoi,Anup K. Ghosh,Abhijit Majumdar,Sudip K. Pattanayek

DOI: https://doi.org/10.1002/pc.28354

IF: 5.2

2024-03-30

Polymer Composites

Abstract:From synthesis, characterization of silica‐based shear thickening fluid on Kevlar in impact resistance applications. Shear thickening fluid (STF), a highly concentrated mixture of nanosized silica particles in polyethylene glycol (PEG) is characterized by its quick transition to a stiff, solid‐like form under high shear rates. In this study, the modified Stöber synthesis approach was used for synthesizing the monodispersed spherical 300 nm silica nanoparticles. The rheological properties of the STF formulated using different silica loading were characterized. The Takshak model was tested to assess the rheological properties. The effect of the STFs on the impact resistance and yarn pull‐out force of the Kevlar® 802 fabric was determined. The uniformity in size of the silica nanoparticles facilitated more efficient packing within the fluid matrix, resulting in the formation of networks or structures that enhance shear thickening behavior. The STF with 70% silica exhibited the best peak viscosity of 45.8 Pa.s. Upon impregnation of this STF onto the Kevlar, a significantly high energy absorption (478.4%) compared to neat Kevlar, was observed. Moreover, the yarn pull‐out force for this system was found to be very high (435.8%). The reasons for the enhancement of the properties are explained. The novelty of this work lies in the synthesis of silica particles, analysis of the rheological properties, and interrelating the rheological properties with the characteristic parameters to define the impact characteristics. The improved properties underscore the suitability of synthesized STF for impact resistance applications.

materials science, composites,polymer science
Protective performance of shear stiffening gel-modified foam against ballistic impact: Experimental and numerical study

Huan Tu,Haowei Yang,Pengzhao Xu,Zhe Yang,Fan Tang,Cheng Dong,Yuchao Chen,Lei Ren,Wenjian Cao,Chenguang Huang,Yacong Guo,Yanpeng Wei

DOI: https://doi.org/10.1016/j.dt.2023.10.001

IF: 4.035

2023-10-15

Defence Technology

Abstract:As one of the most widely used personal protective equipment (PPE), body armors play an important role in protecting the human body from the high-velocity impact of bullets or projectiles. The body torso and critical organs of the wear may suffer severe behind-armor blunt trauma (BABT) even though the impactor is stopped by the body armor. A type of novel composite material through incorporating shear stiffening gel (STG) into ethylene-vinyl acetate (EVA) foam is developed and used as buffer layers to reduce BABT. In this paper, the protective performance of body armors composed of fabric bulletproof layers and a buffer layer made of foam material is investigated both experimentally and numerically. The effectiveness of STG-modified EVA in damage relief is verified by ballistic tests. In parallel with the experimental study, numerical simulations are conducted by LS-DYNA® to investigate the dynamic response of each component and capture the key mechanical parameters, which are hardly obtained from field tests. To fully describe the material behavior under the transient impact, the selected constitutive models take the failure and strain rate effect into consideration. A good agreement between the experimental observations and numerical results is achieved to prove the validity of the modelling method. The tests and simulations show that the impact-induced deformation on the human body is significantly reduced by using STG-modified EVA as the buffering material. The improvement of protective performance is attributed to better dynamic properties and more outstanding energy absorption capability of the composite foam.

engineering, multidisciplinary
An analysis of deformation and energy absorption modes of shear thickening fluid treated Kevlar fabrics as soft body armour materials

Abhijit Majumdar,Bhupendra Singh Butola,Ankita Srivastava

DOI: https://doi.org/10.1016/j.matdes.2013.04.016

2013-10-01

Abstract:In this article the deformation and energy absorption modes of shear thickening fluid (STF) treated and untreated Kevlar woven fabrics upon impact has been presented. It was found that in untreated Kevlar fabrics, only the primary yarns, which are engaged by the impactor, participate in load sharing and hence energy absorption. Since the load per yarn is high, the yarns slip at the grip, forming long loops but the rest of the fabric remains undisturbed. Due to participation of only a few yarns, the energy absorption is low. However, in case of STF treated fabrics, the STF is transformed into a solid like material during impact. The transformed STF acts as a bridging matrix which converts the network of yarns in the fabric into a single structure. Hence, unlike in untreated fabrics, the entire fabric rather than only primary yarns participates in load bearing and energy absorption. The failure of the STF treated structure is by rupture of fibers and yarns rather than their slippage.

materials science, multidisciplinary
Surgical indications for lower extremity arterial occlusive disease--part I.

W. M. Blackshear

DOI: https://doi.org/10.1016/0146-2806(81)90028-1

IF: 16.464

Current Problems in Cardiology

Abstract:
The effect of particle strength on the ballistic resistance of shear thickening fluids

Oren E. Petel,Simon Ouellet,Jason Loiseau,Bradley J. Marr,David L. Frost,Andrew J. Higgins

DOI: https://doi.org/10.1063/1.4791785

IF: 4

2013-02-11

Applied Physics Letters

Abstract:The response of shear thickening fluids (STFs) under ballistic impact has received considerable attention due to its field-responsive nature. While efforts have primarily focused on traditional ballistic fabrics impregnated with these fluids, the response of pure STFs to penetration has received limited attention. In the present study, the ballistic response of particle-based STFs is investigated and the effects of fluid density and particle strength on ballistic performance are isolated. It is shown that the loss of ballistic resistance in the STFs at higher impact velocities is governed by the material strength of the particles in suspension. The results illustrate the range of velocities over which these STFs may provide effective armor solutions.

physics, applied
Technological aspects of body armour textiles for ballistic protection application

Doaa H. ElgoharyDepartment of Spinning and Weaving Engineering,Textile Research and Technology Institute,National Research Centre,Dokki,Egypt

DOI: https://doi.org/10.1080/00405000.2024.2343162

IF: 1.7698

2024-04-23

Journal of the Textile Institute

Abstract:The use of armor to protect personal items has a long history dating back to ancient times. The technology of body armor materials is being rapidly explored with a focus on the current understanding of significant energy absorbing mechanisms. New and innovative materials such as fibers, composites, laminates, and ceramics have been extensively utilized to meet the needs of modern military operations, technology-driven warfare tactics, and current terrorist threats. There are two types of personal protective equipment for military personnel including soft body armor and hard body armor. The overall performance of ballistic materials against ballistic impact depends not only on individual fiber types, but also on various combined factors such as multiple layers, yarn properties, fabric area density, target layer numbers, targeted layer sequence and textile construction. These types can be applied using woven/non-woven fabrics either 2D or 3D fabrics. Polymer matrix composites are increasingly being used in soft or inflexible structures to protect the human body and equipment from various types of ballistic attacks and associated hazards. As the current study shows, the ballistic efficiency of polymer-based composite body armor is primarily determined by the thickness, load, durability, stiffness and puncture resistance of the target material as well as the projectile parameters. Nowadays, the development of strong fibers with high breaking strength and high modulus has led to the use of textiles. However, the purpose of developing body armor is to minimize risks and protect people from serious injuries. The current status of ongoing innovations in ballistic fibers is then examined and analyzed and future forecasts are presented. On the other hand, Shear thickening fluids (STFs) have been used to improve the performance of fabrics for protective applications in ballistics. When STF is applied to a ballistic material, it only becomes rigid at the time of impact. The relative movement between yarn and fibers within a fabric result in severe shear deformation of the STF, increasing the ballistic capabilities of the fabric.

materials science, textiles
A Computational Analysis of the High-velocity Impact Performance of Lightweight 3D Hybrid Composite Armors

Bandaru, Aswani Kumar

DOI: https://doi.org/10.1007/s10443-023-10112-0

IF: 2.3

2023-03-11

Applied Composite Materials

Abstract:Basalt and Kevlar materials are high-performance reinforcements used in armor systems. The present work presented that the combination of natural fiber (basalt) with synthetic fiber (Kevlar) and alumina tile composites improves ballistic performance. The partial replacement of basalt encourages the use of natural reinforcement for the development of eco-friendly armor. Continuum damage mechanics (CDM) based modeling is used with a high strain rate and implemented based on Yen's criteria. Cohesive elements are used at inter-layers for modeling the damage evolution. The damage initiation and propagation model is created and implemented as a user-defined subroutine in the ABAQUS finite element (FE) code (VUMAT). Parametric studies are performed by varying the stacking sequence of Kevlar 3D (K3D) and basalt 3D (B3D) layers and the best stacking is used with ceramic (alumina) material. The optimum stacking sequence of composite laminate thickness is investigated to design the light weight body armour and the better results are used to reduce the thickness of the panel, which is the key factor to design any armor panel. Results revealed the panels with basalt composite (B16) impacting with FSP impactor and alumina/Kevlar/basalt composite (C1K7B8) impacting with 9 mm FMJ impactor improved the ballistic performance as compared to H16, K8H8 and K8B8 stacking sequences.

materials science, composites

Abuse of steroidal drugs by homoeopaths and hakims. 1981.

Anti-impact Behavior of a Novel Soft Body Armor Based on Shear Thickening Gel (STG) Impregnated Kevlar Fabrics

Experimental analysis of the impact protection properties for Kevlar® fabrics under different orientation layers and non-Newtonian fluid compositions

Experimental analyzing the static puncture resistance performance of shear thickening fluid impregnated polypropylene hybrid composite target structures for armour application

Graphene Reinforced Multiphase Shear Thickening Fluid for Augmenting Low Velocity Ballistic Resistance

Study on the enhancement mechanism of ballistic properties of shear thickening fluid impregnated aramid fabric composite plates

An Experimental Investigation on Dynamic Behaviors of Shear Thickening Fluid Impregnated Aramid Fabrics for Different Number of Layers

Stab-Resistant Performance of the Well-Engineered Soft Body Armor Materials Using Shear Thickening Fluid

Enhanced dynamic stab resistance and UV-resistance of flexible and lightweight Kevlar fabrics impregnated with multi-phase shear thickening fluid

Conductive Shear Thickening Gel/kevlar Wearable Fabrics: A Flexible Body Armor with Mechano-Electric Coupling Ballistic Performance

Impact Resistance of Shear Thickening Fluid/kevlar Composite Treated with Shear-Stiffening Gel

Study on dynamic and static tensile and puncture-resistant mechanical properties of impregnated STF multi-dimensional structure Kevlar fiber reinforced composites

The ballistic performance of STF impregnated Kevlar fabric coating GFRP composite structure

Preparation and characterization of shear thickening fluid/carbon nanotubes/Kevlar composite materials

Synthesis and characterization of monodispersed silica‐based shear thickening fluid for impact resistance applications

Protective performance of shear stiffening gel-modified foam against ballistic impact: Experimental and numerical study

An analysis of deformation and energy absorption modes of shear thickening fluid treated Kevlar fabrics as soft body armour materials

Surgical indications for lower extremity arterial occlusive disease--part I.

The effect of particle strength on the ballistic resistance of shear thickening fluids

Technological aspects of body armour textiles for ballistic protection application

A Computational Analysis of the High-velocity Impact Performance of Lightweight 3D Hybrid Composite Armors