Abstract:Molten salts and their based nanofluids are important media for heat transfer and thermal energy storage in concentrated solar power (CSP) system. To improve the overall efficiency of the CSP plants, it is important to increase the specific heat capacity of molten salt to the extent possible. Nanomaterials have been doped in molten salt to enhance the specific heat capacity of molten salt; however, the mechanism of enhancement in specific heat capacity caused by doping of nanoparticles in molten salt is still unclear. In this work, the Buckingham force field parameters for alkali metal chloride molten salts (KCl, NaCl, LiCl) were first derived and carefully validated. The specific heat capacities, viscosities, and self-diffusion coefficients of pure molten salts and the specific heat capacities of molten-salt-based nanofluids with SiO 2 nanoparticles were investigated by molecular dynamics (MD) simulations. The calculated thermophysical properties of the chloride molten salts using the derived Buckingham potential parameters are in good agreement with the experimental data, and the overall prediction performance is better than that of the BMH potential. Results show that the specific heat capacity of molten salt first increases and then decreases with increasing SiO 2 doping ratio, reaching a maximum value at 1 wt%. The specific heat capacities of KCl, NaCl and LiCl nanofluids with 1 wt% SiO 2 nanoparticle are increased by 6.2 %, 8.6 % and 19.8 % compared to the base salts, respectively. Number density, radial distribution function, coordination number curves, and energy of the nanofluid system were systematically analyzed. It is found that the increase of the specific heat capacities of the molten salt-based nanofluids can be explained by the energy and coordination number change caused by the number density mismatch of cations and anions. Interestingly, the local delamination of cations around SiO 2 nanoparticle surfaces in LiCl-SiO 2 nanofluids is clearly observed and visualized for the first time; it is a phenomenon well explained by the analysis of number density and contributes to the further enhancement of the heat capacity. The findings of this work could provide important fundamentals in understanding and designing more efficient molten salt nanocomposites for thermal energy storage in future studies.

Enhanced Specific Heat of Sodium Acetate Trihydrate by In-Situ Nanostructure Synthesis

An Experimental Study of Inward Solidification of Nano-Enhanced Phase Change Materials (nepcm) Inside A Spherical Capsule

Thermophysical Properties' Enhancement of LiNO3-NaNO3-KNO3-NaNO2-KNO2 Mixed with SiO2/MgO Nanoparticles

Investigation on Performance of Multi-Salt Composite Sorbents for Multilevel Sorption Thermal Energy Storage

EFFECTS OF NANOPARTICLE DISPERSION ON ENHANCING SPECIFIC HEAT CAPACITY OF LMPS SALT

Effect of Morphology and Concentration of Two Carbon Allotropes on the Enhancement of Specific Heat Capacity of Eutectic Molten Salt

Nanoadditives induced enhancement of thermal energy storage properties of molten salt: Insights from experiments and molecular dynamics simulations

Enhancing phase change thermal properties of unitary and binary nitrates by carbon/ceramic-based nanoparticles via interfacial effect

Al 2 O 3 nanoparticles integration for comprehensive enhancement of eutectic salt thermal performance: Experimental design, molecular dynamics calculations, and system simulation studies

Preparation and Performance Analysis of Modified Sodium Acetate Trihydrate

A synthesis parameter of molten salt nanofluids for solar thermal energy storage applications

On the specific heat capacity of HITEC-salt nanocomposites for concentrated solar power applications

Experimental study on supercooling performance optimization of sodium acetate trihydrate phase change energy storage materials

Preparation of modified sodium acetate trihydrate and the thermodynamic analysis

Synthesis and Characterization of Molten Salt Nanofluids for Thermal Energy Storage Application in Concentrated Solar Power Plants-Mechanistic Understanding of Specific Heat Capacity Enhancement

Electrically driven nucleation for enhanced control of salt hydrate hydrogel heat release in long-term thermal storage applications

New Insights into the Heat Capacity Enhancement of Nano-Sio2 Doped Alkali Metal Chloride Molten Salt for Thermal Energy Storage: A Molecular Dynamics Study

Optimization of supercooling, thermal conductivity, photothermal conversion, and phase change temperature of sodium acetate trihydrate for thermal energy storage applications

In-situ Synthesis of Nanocrystalline TiC Powders, Nanorods, and Nanosheets in Molten Salt by Disproportionation Reaction of Ti(II) Species

New insights into the heat capacity enhancement of nano-SiO 2 doped alkali metal chloride molten salt for thermal energy storage: A molecular dynamics study

Metal- and Alloy-Based Core–Shell Particles in Nitrate Senary Salt with Low Thermal Hysteresis for Solar Thermal Energy Storage