Abstract:A new technique and an application program for automating the programming of the milling operation during virtual basing of the workpiece on the CNC machine table is presented, when precise installation of the workpiece along the coordinate axes of the machine is difficult. The solution of such a scientific and technical problem allows you to perform contour milling of parts with their arbitrary location on the table of the CNC machine with guaranteed alignment of the allowance along the forming path. The method involves the sequential implementation of three stages with parallel use of the created application program. At the first stage, an electronic copy of the part drawing is prepared, which contains the selected part and workpiece contour highlighted in different colors. Thus, the scanning provides automatic creation of digital two-dimensional arrays of geometric images necessary to solve the problem. At the second stage, the coordinates of three points of the workpiece measured by the probe on the machine are entered into the created program. Based on the entered data, the created program solves the problem of alignment of the allowance using the Gauss-Seidel method using the Hausdorff dimension. This approach allows us to obtain a quantitative estimate of the similarity of polygonal objects, which is necessary to solve the problem of minimax location of the allowance. The task is to determine the correction of the control program for two linear coordinates and one angular around the center of mass of the workpiece. At the third stage, the correction values calculated in the program are entered into the CNC rack of the machine and the processing of the contour begins. The proposed technique and the created application program were tested when processing the part contour on a VF-3 HAAS milling machine. Practical testing has shown the effectiveness of the technique, which is to ensure milling without overloading the tool and reduce the processing time during virtual basing of the workpiece

Positioning of the Cutting Tool of a CNC Type Milling Machine by Means of Digital Image Processing

A critical review for machining positioning based on computer vision

Development of a computer vision-based system for part referencing in CNC machining centers

On-machine dimensional inspection: machine vision-based approach

A Real-Time Tool Positioning Sensor for Machine-Tools

Evaluation of machine-tool motion accuracy using a CNC machining center in micro-milling processes

Machining Process Automation in Computer Numerical Control Turning Using Robot-Assisted Imaging and CNN-Based Machine Learning

Optimized Design of Source Energy for Manufacturing Machine by Digital Numerical Control

An Automatic Measurement, Identification and Adjustment Method to Position of Work-piece Machined

Performance Evaluation of Multi-Axis CNC Machine Tools by Interferometry Principle using Laser Calibration System

System for Tool-Wear Condition Monitoring in CNC Machines under Variations of Cutting Parameter Based on Fusion Stray Flux-Current Processing

Automated visual positioning and precision placement of a workpiece using deep learning

Methodology for Tool Wear Detection in CNC Machines Based on Fusion Flux Current of Motor and Image Workpieces

In-Situ Measurement and Distributed Computing for Adjustable CNC Machining

A model approach for in-process tool condition monitoring in CNC turning using machine vision

Digitalization of an Industrial Process for Bearing Production

Machining Digital Twin using real-time model-based simulations and lookahead function for closed loop machining control

Online Tool Wear Classification during Dry Machining Using Real Time Cutting Force Measurements and a CNN Approach

Contour milling programming technology for virtual basing on a CNC machine

A Novel Computer Vision Based Machine Learning Approach For Online Tool Wear Monitoring In Machining