Abstract:Tool wear and breakage is one of the biggest obstacles for developing the unattended CNC machining. Especially when cutting the difficult-to-machining materials, the tool wear will be more rapid and the tool breakage becomes more frequent, which makes an effective tool wear and breakage monitoring very urgent. In the paper, a physical model-based tool wear and breakage monitoring method is proposed. Firstly, a physical model of milling force with the influence of cutter runout and tool wear is established. The spindle box vibration and cutting torque of spindle drive system induced by milling force have been clarified theoretically. Then, through the measurements of milling force, spindle box vibration and driving current, a tool wear monitoring method by extracting the comprehensive feature from the seven-channel specific cutting force coefficients (SCFCs) has been presented. In the method, a multi-parameter decoupling identification procedure for the cutter runout, tooth wear loss and respective SCFCs has been clarified. The force homogenization effect of multi-tooth with tool wear is found. Moreover, an efficient tool breakage monitoring method is further put forward, which incorporates the amplitude ratios of multi-channel data to form an indicator for judging the occurrence of tool damage. The generation mechanism of the sudden distortion on signal waveform resulting from tool breakage is also explained. Finally, long-time milling experiments with multiple groups of machining parameters have been carried out on the general and heavy-cutting machine tools to verify the validity of the proposed method. The verification results indicate that the tool wear and breakage monitoring method can well estimate the cutting status of cutter. The study can provide a useful research basis for the potential industrial application of tool wear and breakage monitoring technology.

A model approach for in-process tool condition monitoring in CNC turning using machine vision

Study of Tool Wear Monitoring Using Machine Vision

A Novel Computer Vision Based Machine Learning Approach For Online Tool Wear Monitoring In Machining

A Machine Vision System for Micro-Milling Tool Condition Monitoring

A machine vision system for tool wear assessment

Using the Machine Vision Method to Develop an On-machine Insert Condition Monitoring System for Computer Numerical Control Turning Machine Tools

Application of machine vision for tool condition monitoring and tool performance optimization–a review

Tool-Wear-Estimation System in Milling Using Multi-View CNN Based on Reflected Infrared Images

Tool wear condition monitoring by combining spindle motor current signal analysis and machined surface image processing

Tool wear monitoring based on the combination of machine vision and acoustic emission

Tool wear monitoring based on scSE-ResNet-50-TSCNN model integrating machine vision and force signals

System for Tool-Wear Condition Monitoring in CNC Machines under Variations of Cutting Parameter Based on Fusion Stray Flux-Current Processing

Tool condition monitoring in CNC end milling using wavelet neural network based on machine vision

A novel approach of combined edge detection and segmentation for tool wear measurement in machining

Online tool wear monitoring by super-resolution based machine vision

Tool Condition Monitoring of the Cutting Capability of a Turning Tool Based on Thermography

Computer numerical control machine tool wear monitoring through a data-driven approach

Cutting Tool Wear Monitoring in CNC Machines Based in Spindle-Motor Stray Flux Signals

Accurate tool wear and breakage monitoring method for milling process based on vision and laser sensor fusion

Physical model-based tool wear and breakage monitoring in milling process

In-process Tool Wear Prediction System Based on Machine Learning Techniques and Force Analysis