Abstract:A series of experimental investigations had been performed to analyze the heat and mass transfer performance for two novel types of silica-based consolidated composite adsorbents developed by the freeze-drying method. The first type of adsorbent is silica gel consolidated with carboxymethyl cellulose (CMC) (SC), while the other is silica gel consolidated with CMC and carbon fiber powder (SCC). Results indicate that the thermal conductivity of consolidated composite adsorbents increases with the mass proportion of carbon fiber powder, while it decreases with the increasing moisture content in the preparation process of the adsorbents. When the mass ratio of silica gel, CMC, and carbon fiber powder is 4:1:4, the highest thermal conductivity of consolidated composite adsorbent obtained from experiments reaches 1.66 W m−1 K−1, which is 13.4 times greater than that of pure silica gel. Furthermore, the results of macroporous properties analysis of typical samples including SC20 and SCC20 (where the 20 means that the undried samples have a water content of 20% by mass during the preparation process) show that heat transfer additives effectively improve the macroporous porosity and permeability of the consolidated composite adsorbents. The study on adsorption dynamic performance indicates that the freeze-drying method helps to improve the adsorption performance including adsorption rate and equilibrium water uptake. The experimental results also show that the mass transfer coefficient K of the two typical samples are approximately stable at 5 × 10−3 s−1 when the adsorption temperature is ranged between 30 and 40°C, which are almost twice the corresponding values of the samples developed by heating–drying method. Therefore, the proposed approach which is the consolidation with heat transfer additives combined with freeze-drying method is effective for simultaneously enhancing the heat and mass transfer performance of the silica gel adsorbents.

The heat and mass transfer performance of facile synthesized silica gel/carbon-fiber based consolidated composite adsorbents developed by freeze-drying method

Investigation on Thermal Characteristics of Novel Composite Sorbent with Carbon Coated Iron As Additive

Investigation of a Novel Composite Sorbent for Improved Sorption Characteristic

Fabrication and Thermal Conductivity Improvement of Novel Composite Adsorbents Adding with Nanoparticles

Thermal Conductivity, Pore Structure and Adsorption Performance of Compact Composite Silica Gel

Simulation of Heat and Mass Transfer Performance with Consolidated Composite Activated Carbon

Heat Transfer Enhancement of a New Composite Adsorbent

Development and Simulation Research on a New Composite Adsorbent

Development and performance test of new composite adsorbent

Performance Analysis of Adsorption Refrigeration Using a Composite Adsorbent with Improved Heat and Mass Transfer

Study the characteristic of a new composite adsorbent and the simulation of a simple adsorption process

Moisture transport and adsorption on silica gel–calcium chloride composite adsorbents

Development and testing of silica gel with graphite powder composite adsorbent for cooling applications

Water Vapor Sorption Performance of ACF-CaCl2 and Silica Gel-Cacl2 Composite Adsorbents

Microstructure and Sorption Performance of Consolidated Composites Impregnated with LiCl

Experimental Study on Performance of Silica Gel and Potassium Formate Composite Desiccant Coated Heat Exchanger

Preparation And Study The Characteristic Of A New Composite Adsorbent Employing Lithium Chloride In Silica Gel

Effects of heat-dry curing temperature on porous silicate cement membranes fabricated by the coupling process of freeze casting and heat-dry curing

Preparation of Hydrophobic Hierarchical Pore Carbon–silica Composite and Its Adsorption Performance Toward Volatile Organic Compounds

New Carbon–Silica Composite Adsorbents from Elutrilithe

Mechanical Performance and Thermal Stability of Glass Fiber Reinforced Silica Aerogel Composites Based on Co-Precursor Method by Freeze Drying