Abstract:Melt-blown nonwoven fabrics for filtration are usually manufactured using polypropylene, but after a certain time period the middle layer of the mask may have a reduced effect on adsorbing particles and may not be easily stored. Adding electret materials not only increases storage time, but also shows in this study that the addition of electret can improve filtration efficiency. Therefore, this experiment uses a melt-blown method to prepare a nonwoven layer, and adds MMT, CNT, and TiO2 electret materials to it for experiments. Polypropylene (PP) chip, montmorillonite (MMT) and titanium dioxide (TiO2) powders, and carbon nanotube (CNT) are blended and made into compound masterbatch pellets using a single-screw extruder. The resulting compound pellets thus contain different combinations of PP, MMT, TiO2, and CNT. Next, a hot pressor is used to make the compound chips into a high-poly film, which is then measured with differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR). The optimal parameters are yielded and employed to form the PP/MMT/TiO2 nonwoven fabrics and PP/MMT/CNT nonwoven fabrics. The basis weight, thickness, diameter, pore size, fiber covering ratio, air permeability, and tensile property of different nonwoven fabrics are evaluated in order to have the optimal group of PP-based melt-blown nonwoven fabrics. According to the results of DSC and FTIR measurements, PP and MMT, CNT, and TiO2 are completely mixed, and the melting temperature (Tm), crystallization temperature (Tc) and endotherm area are changed accordingly. The difference in enthalpy of melting changes the crystallization of PP pellets, which in turn changes the fibers. Moreover, the Fourier transform infrared (FTIR) spectroscopy results substantiate that PP pellets are well blended with CNT and MMT, according to the comparisons of characteristic peaks. Finally, the scanning electron microscopy (SEM) observation suggests that with a spinning die temperature of 240 °C and a spinning die pressure lower than 0.01 MPa, the compound pellets can be successfully formed into melt-blown nonwoven fabrics with a 10-micrometer diameter. The proposed melt-blown nonwoven fabrics can be processed with electret to form long-lasting electret melt-blown nonwoven filters.

Filtration Property of Monofilament Core–Shell Mesh Fabric Treated Via Tourmaline Hot Coating

Preparation and characterization of super hydrophobic aerogel coated ultra-high molecular weight polyethylene fabric

High Filterable Electrospun Nanofibrous Membrane with Charged Electret After Electrification Treatment for Air Filtration

Fabrication of an amino-modified MWCNTs grafted with chlorosulfonated PMIA nanofibrous membrane via electrospinning for efficient high-temperature dust filtration

Tourmaline triggered biofilm transformation: Boosting ultrafiltration efficiency and fouling resistance

Fabrication of Magnetic Core–shell Nanocomposites with Superior Performance for Water Treatment

Breathable, self-healable, durable superhydrophobic and UV-blocking cotton fabrics

A waterproof and breathable nanofibrous membrane with thermal‐regulated property for multifunctional textile application

Preparation of PVA/PEI/CNC/ZnO composite membrane with good mechanical properties and water resistance by electrostatic spinning using for efficient filtration of PM2.5

Design of Polypropylene Electret Melt Blown Nonwovens with Superior Filtration Efficiency Stability through Thermally Stimulated Charging

Electrospinning and Partial Etching Behaviors of Core-Shell Nanofibers Directly Electrospun on Mesh Substrates for Application in a Cover-Free Compact Air Filter

Bio-inspired Fabrication of Superhydrophilic and Underwater Superoleophobic Mineralized Polypropylene Nonwoven Meshes for Oil/Water Separation

Brushing a superhydrophilic cross-linked coating on the metal mesh for dye separation

Preparation of Nano Tourmaline Surface Treatment Agent and Its Application on Functional Wall Fabrics

Long-Lasting Electret Melt-Blown Nonwoven Functional Filters Made of Organic/Inorganixc Macromolecular Micron Materials: Manufacturing Techniques and Property Evaluations

Surface engineered alumina microfiltration membranes based on rationally constructed core-shell particles

PDMS-Based Hierarchical Superhydrophobic Fabric Coating Fabricated by Thermal Treatment and Electrostatic Flocking Technology

Electrospun 3D Curly Electret Nanofiber Air Filters for Particulate Pollutants

Nanofibrous membranes with hydrophobic and thermoregulatory functions fabricated by coaxial electrospinning

High-Temperature-Resistant Dual-Scale Ceramic Nanofiber Films toward Improved Air Filtration

Modification of Nano Tourmaline Surface Treatment Agent and Its Performance on Negative Ion Release