Abstract:By varying the oil volume fraction, the microscopic droplet size and the macroscopic rheology of emulsions are investigated in a Taylor–Couette turbulent shear flow. Although here oil and water in the emulsions have almost the same physical properties (density and viscosity), unexpectedly, we find that oil-in-water (O/W) and water-in-oil (W/O) emulsions have very distinct hydrodynamic behaviours, i.e. the system is clearly asymmetric. By looking at the micro-scales, the average droplet diameter hardly changes with the oil volume fraction for O/W or for W/O. However, for W/O it is about larger than that of O/W. At the macro-scales, the effective viscosity of O/W is higher when compared to that of W/O. These asymmetric behaviours are expected to be caused by the presence of surface-active contaminants from the walls of the system. By introducing an oil-soluble surfactant at high concentration, remarkably, we recover the symmetry (droplet size and effective viscosity) between O/W and W/O emulsions. Based on this, we suggest a possible mechanism responsible for the initial asymmetry and reach conclusions on emulsions where interfaces are fully covered by the surfactant. Next, we discuss what sets the droplet size in turbulent emulsions. We uncover a scaling dependence of the droplet size on the Reynolds number of the flow. Combining the scaling dependence and the droplet Weber number, we conclude that the droplet fragmentation, which determines the droplet size, occurs within the boundary layer and is controlled by the dynamic pressure caused by the gradient of the mean flow, as proposed by Levich (Physicochemical Hydrodynamics, Prentice-Hall, 1962), instead of the dynamic pressure due to turbulent fluctuations, as proposed by Kolmogorov (Dokl. Akad. Nauk. SSSR, vol. 66, 1949, pp. 825–828). The present findings provide an understanding of both the microscopic droplet formation and the macroscopic rheological behaviours in dynamic emulsification, and connects them.

Wetting controls of droplet formation in step emulsification

Wetting Behaviors and Mechanism of Micro Droplets on Hydrophilic Micropillar-Structured Surfaces

Elucidating the mechanism of step-emulsification

Controlled Production of Emulsion Drops Using an Electric Field in a Flow-Focusing Microfluidic Device

Shear Force Induced Monodisperse Droplet Formation in a Microfluidic Device by Controlling Wetting Properties

Jetting to dripping transition: Critical aspect ratio in step emulsifiers

Step emulsification in microfluidic droplet generation: mechanisms and structures.

Step-emulsification in nanofluidic device

Tunable structures of compound droplets formed by collision of immiscible microdroplets

Topological Wetting States of Microdroplets on Closed-Loop Structured Surfaces: Breakdown of the Gibbs Equation at the Microscale

Collective generation of milliemulsions by step-emulsification

Emulsification in a Microfluidic Flow-Focusing Device: Effect of the Viscosities of the Liquids

Microfluidic Coupling of Step Emulsification and Deterministic Lateral Displacement for Producing Satellite-Free Droplets and Particles

Dynamic of centrifugal step emulsification and prediction of droplet diameter

Instability of Electrowetting on a Dielectric Substrate

Controllable preparation of double emulsion droplets in a dual-coaxial microfluidic device

Physical mechanisms for droplet size and effective viscosity asymmetries in turbulent emulsions

Capillary focusing close to a topographic step: Shape and instability of confined liquid filaments

Investigation of Microfluidic Co-Flow Effects on Step Emulsification: Interfacial Tension and Flow Velocities

Investigation of Droplet Coalescence in Nanoparticle Suspensions by a Microfluidic Collision Experiment

Microdroplets nucleation by dissolution of a multicomponent drop in a host liquid