Abstract:The effect of cooling rate and Nb addition on the phase transformation, microstructures, and mechanical properties of thermomechanically controlled hot-rolled low-carbon CrNiMnMoB ultrahigh-strength steel were studied. The aspects impeding Nb's benefits on hardenability, phase transformation, and mechanical properties were investigated. The hot rolling process was simulated, and a continuous cooling transformation diagram was constructed for the studied steels. Microstructures were analysed using laser scanning confocal microscopy and field emission scanning electron microscopy, with the latter also used for in-depth investigations of the non-metallic inclusions. Transmission electron microscopy was employed to investigate the precipitate characteristics. The concentrations of Nb in the solution and precipitates were quantified for the martensitic and granular bainitic structures. The effect of Nb in solution on phase transformation and strengthening is diminished, and the hardness is reduced by Nb precipitation at an early processing stage. Decreasing the cooling rate promotes the formation of granular bainitic structures rather than martensite. After being subjected to hot rolling followed by water quenching and air cooling, the microstructures are autotempered martensite and fully granular bainite, respectively. Various non-metallic inclusions, including Al 2 O 3 , MnS, and Al 2 O 3 –MnS, MnS.BN, Al 2 O 3 .BN and MnS.Al 2 O 3 .BN were observed. The number density and area fraction of non-metallic inclusions in the Nb-containing steel and the air-cooled samples are higher than those observed in the Nb-free and water-quenched samples. Adding 0.04 wt.% of Nb slightly increased the strength, but the toughness properties dropped, mainly due to the higher number density and area fraction of non-metallic inclusions and primary large precipitates.

Effect of Niobium and Heat Treatment on the Microstructure and Mechanical Properties of SAE 8620 Steel

Effects of niobium and heat treatment on microstructure and mechanical properties of low carbon cast steels

Heat Treatment Effect on the Microstructure and Tribological Behaviour of a High Chromium Cast Iron with 0.5% of Niobium

Effect of niobium addition on the properties and microstructure of a high chromium cast iron alloy

Influence of Niobium and Molybdenum on Mechanical Strength and Wear Resistance of Microalloyed Steels

Influence of Niobium Addition on Microstructure and Machinability of High Chromium Cast Iron

Impact of Niobium Addition and Non-Metallic Inclusions' Characteristics on the Microstructure and Mechanical Properties of Low-Carbon CrNiMnMoB Ultrahigh-Strength Steel: A Comprehensive Investigation

Effects of Niobium Microalloying on the Transformation Kinetics, Microstructure, and Mechanical Properties of Medium-Carbon Ultra-fine Bainitic Steel

Application of niobium microalloying in heat treatment of engineering steels

Effect of Heat Treatment Temperature on the Microstructure, Wear and Friction of Ni–Nb–V Alloyed Manganese Steel

Boron and Thermomechanical Processing Effects on the Metallurgical Properties of a Niobium-Titanium High-Strength Low-Alloy Steel

Effect of Nb Content in the Microstructural and Thermal Characteristics of NiTiNb Shape Memory Alloys

Production of Niobium Carbide Layers on High‐Strength Bainitic Steels by Thermochemical Treatment of Thermoreactive Diffusion Followed by Austempering

Effect Of Nb On Microstructure And Mechanical Properties Of Fe-28mn-10al-C Low-Density Steel

Effect of different thermomechanical processing on structure and mechanical properties of electron beam melted niobium

A new strategy for developing a Nb microalloyed fire-resistant steel: effects of boron and cooling rate

Niobium-Based Alloy Design for Structural Applications: Processing-Structure-Property Paradigm

Research on Microstructure and Properties of Nb-Microalloyed Low Carbon Steel Produced by Strip Casting

Effect of Niobium Modification on Solidification and Crystallization Mechanism of Medium-Carbon Cast Steel

The Influences of Nb Microalloying and Grain Refinement Thermal Cycling on Microstructure and Tribological Properties of Armox 500T

Effect of Annealing Time on Microstructure and Mechanical Properties of Cold-Roled Niobium and Titanium Bearing Micro-aloyed Steel Strips