Abstract:The paper considers the influence of the parameters of the plasma spraying process on the technological characteristics of multilayer coatings based on nickel-chromium, nickel-chromium-aluminum-yttrium materials, oxide ceramics, intended for operation at high temperature and additional dynamic loads. The design of plasma coatings during their application (with subsequent high-energy processing) under such conditions requires a comprehensive solution – both the use of high-quality powder ingredients and the optimization of technological parameters. The plasma process of applying powder materials has been improved to obtain the maximum values of their utilization factors. The technological characteristics that affect the properties of plasma coatings are optimized, namely: the flow rates of the plasma-forming and materials-transporting gases, the flow rate of supplied powder materials, the current and voltage of the electric arc of the plasma torch, the distance from the plasma torch nozzle exit to the substrate. The paper presents the results of studies of the structure of coatings, performed using scanning electron microscopy. Their analysis has made it possible to form general regularities obtained by the action of radiation of compression plasma flows on coatings formed by air plasma. The considered structures are created using the processes of melting, compaction and high-speed cooling of plasma coatings. The main optimization indicators are the maximum local compaction and spillage of the obtained compositions with the absence of defects and destruction from the impact of compression plasma flows. The main effect during the action of radiation of a compression plasma flow on previously formed coatings is thermal. It contributes heating of the near-surface layer. When the coating is exposed to radiation of compression plasma flows, a remelted layer of oxides with a thickness of about 12–15 μm is created, smoothing the relief of the formed surface and creating a network of cracks on the surface, diverging into the depth of the coating. The liquid-phase processes occurring in the molten phase of the near-surface layers after exposure to compression plasma radiation change the structure of the layers and contribute to the modification of their mechanical properties. By smoothing the surface, increasing the density of the surface crystallized layer and minimizing macro-defects – pores or macrocracks – the mechanical characteristics of the coatings increase.

Change of the Substrate Surface After Removal Multiple Plasma Spraying Layers

Optimization of Masking Process of Steel Tube During Atmospheric Plasma Spraying, for Use in Serial Production

Multi-Layers Composite Plasma Coatings Based on Oxide Ceramics and M-Croll

Surface modification of coatings based on Ni-Cr-Al by pulsed plasma treatment

Comparative Study of Thermally Sprayed Coatings Under Different Types of Wear Conditions for Hard Chromium Replacement

Structural analysis and mechanical properties of some coatings obtained by cold spray method. A review

Microstructure Characteristics, Tribology and Nano-Hardness of Plasma Sprayed NiCrRe Coating

Preparation and Characterization of Multilayer NiTi Coatings by a Thermal Plasma Process

The Microstructure, Surface Topography and Wear Resistance of Cold-Sprayed (Cr3C2-25(Ni20Cr))-(Ni-graphite) Composite Coatings Modified by Diode Laser Treatment

Modification of Silicon-polyurethane-based Sol-gel Coatings Through Diverse Plasma Technologies: Investigation of Impact on Surface Properties

Development of Thermal Spray Coating Solution for Ceramic Substrates

Chemical composition, structure and microhardness of multilayer high-temperature coatings

Stripping of Thermal Sprayed Oxid Coatings by Means of Laser Techniques, Water Jet and a Newly Developed Hybrid Method

The Influence of Substrate Topography on the Plasma Jet Flow in the Substrate Boundary Layer under Suspension Plasma Spray Conditions: A Numerical Approach

The Influence of the Substrate Topography on the Plasma Jet Flow and Particle Deposition as a Determining Factor of Thermal Barrier Coatings Build-Up Mechanisms in Plasma Spraying

Decorative Chromium Coatings on Polycarbonate Substrate for the Automotive Industry

Plasma Spraying of Solution Precursor in Pulsed Mode: In-Flight Phenomena and Coating Deposition

Surface Modification of Polymers by Plasma Treatment for Appropriate Adhesion of Coatings

Review of effective techniques for surface engineering material modification for a variety of applications

Improvement of the deposition efficiency and adhesion strength of cold sprayed fluoropolymer coating by laser surface texturing of the substrate

Surface Modification Of Porous Low-K Material By Plasma Treatment And Its Application On Reducing The Damage From Sputtering And Cmp Process