Abstract:In research and development, the most emerging field in digital signal processing and image processing is rounded-based approximated signed and unsigned multipliers. In the present research, we propose some cutting-edge, Preformation, and logic simplification technology connected to processing the Discrete cosine transform (DCT) and Discrete wavelet transform (DWT) images for sharpening. This technology will yield a truncated shifter incorporated with logical XOR-MUX Full adder techniques. A reliable and cost-effective approximate signed and unsigned multiplier was created for the rounding method. While this more advanced technology includes many approximate multipliers, it sacrifices the ability to find the closest integer of a rounded value when combining signed and unsigned capabilities, resulting in higher absolute errors than other approximate multipliers based on rounding. This proposed work will introduce a novel method of Truncated Shifter Rounding-based Approximate Multiplier integrated with a High-Level Synchronous XOR-MUX Full Adder design to minimize the number of logic gates and power consumption in the multiplier architecture. The Truncated RoBA (Rounding-based Approximate Multiplier) with XOR MUX Full Adder will reduce the logic size in the shifter and the arithmetic circuit. The work will modify this rounding-based approximate multiplier to minimize area, delay, and power consumption. This proposed architecture will be integrated with two fundamental changes: firstly, its Barrel shifter method will be replaced with a truncated shifter multiplier with XOR MUX Full Adder, and secondly, the parallel prefix Brent Kung adder will be replaced with a carrying-save adder with XOR MUX Full Adder. Finally, this architecture was designed using Verilog-HDL and synthesized using the Xilinx Vertex-5 FPGA family, targeting the device Xc7Vx485tFFg1157-1. It resulted in a reduction of area LUT (34%), power (1%), delay (32%), and error analysis (75%) when compared to the existing RoBA.

An efficient redundant binary adder with revised computational rules

New Designs Of Redundant-Binary Full Adders And Its Applications

Improved Arithmetic for Radix-2 Redundant Signed Digit Number Addition

Speed and Energy Optimised Quasi-Delay-Insensitive Block Carry Lookahead Adder

Enhancing Computational Efficiency in Intensive Domains via Redundant Residue Number Systems

Asynchronous Early Output Dual-Bit Full Adders Based on Homogeneous and Heterogeneous Delay-Insensitive Data Encoding

Asynchronous Ripple Carry Adder based on Area Optimized Early Output Dual-Bit Full Adder

Asynchronous Early Output Block Carry Lookahead Adder with Improved Quality of Results

SAT-controlled Redundancy Addition and Removal: a Novel Circuit Restructuring Technique

Efficient quantum-dot adder optimisation and analysis for future circuits

Approximate Ripple Carry and Carry Lookahead Adders - A Comparative Analysis

Design of High-Speed Area-Efficient VLSI Architecture of 32-Bit Three-Operand Binary Adder

FPGA Implementation of High-Performance Truncated Rounding based Approximate Multiplier with High-Level Synchronous XOR-MUX Full Adder

Performance Analysis of High Speed and Low Power Binary Adders

Performance Comparison of some Synchronous Adders

An Asynchronous Early Output Full Adder and a Relative-Timed Ripple Carry Adder

Design of an Efficient Multilayer Hybrid Reversible Spintronic Ripple Carry Adder Using Quantum Cellular Automata Technique

Design of Synchronous Section-Carry Based Carry Lookahead Adders with Improved Figure of Merit

Optimizing Residue Number Reverse Converters through Bitwise Arithmetic on FPGAs

An Improved Structure Of Reversible Adder And Subtractor

Efficient Adders for Nano Computing: An Approach Using QCA