Abstract:We present a new asynchronous quasi-delay-insensitive (QDI) block carry lookahead adder with redundancy carry (BCLARC) realized using delay-insensitive dual-rail data encoding and 4-phase return-to-zero (RTZ) and 4-phase return-to-one (RTO) handshaking. The proposed QDI BCLARC is found to be faster and energy-efficient than the existing asynchronous adders which are QDI and non-QDI (i.e., relative-timed). Compared to existing asynchronous adders corresponding to various architectures such as ripple carry adder (RCA), conventional carry lookahead adder (CCLA), carry select adder (CSLA), BCLARC, and hybrid BCLARC-RCA, the proposed BCLARC is found to be faster and more energy-optimised. The cycle time (CT), which is the sum of forward and reverse latencies, governs the speed; and the product of average power dissipation and cycle time viz. the power-cycle time product (PCTP) defines the low power/energy efficiency. For a 32-bit addition, the proposed QDI BCLARC achieves the following average reductions in design metrics over its counterparts when considering RTZ and RTO handshaking: i) 20.5% and 19.6% reductions in CT and PCTP respectively compared to an optimum QDI early output RCA, ii) 16.5% and 15.8% reductions in CT and PCTP respectively compared to an optimum relative-timed RCA, iii) 32.9% and 35.9% reductions in CT and PCTP respectively compared to an optimum uniform input-partitioned QDI early output CSLA, iv) 47.5% and 47.2% reductions in CT and PCTP respectively compared to an optimum QDI early output CCLA, v) 14.2% and 27.3% reductions in CT and PCTP respectively compared to an optimum QDI early output BCLARC, and vi) 12.2% and 11.6% reductions in CT and PCTP respectively compared to an optimum QDI early output hybrid BCLARC-RCA. The adders were implemented using a 32/28nm CMOS technology.

Approximate Ripple Carry and Carry Lookahead Adders - A Comparative Analysis

Speed and Energy Optimised Quasi-Delay-Insensitive Block Carry Lookahead Adder

Asynchronous Early Output Section-Carry Based Carry Lookahead Adder with Alias Carry Logic

Performance Comparison of some Synchronous Adders

Asynchronous Early Output Block Carry Lookahead Adder with Improved Quality of Results

An Asynchronous Early Output Full Adder and a Relative-Timed Ripple Carry Adder

Area/latency optimized early output asynchronous full adders and relative-timed ripple carry adders

Design of Synchronous Section-Carry Based Carry Lookahead Adders with Improved Figure of Merit

A Reconfigurable Multiplier for Signed Multiplications with Asymmetric Bit-Widths.

Early Output Hybrid Input Encoded Asynchronous Full Adder and Relative-Timed Ripple Carry Adder

A New Carry Look-Ahead Adder Architecture Optimized for Speed and Energy

A single clock cycle approximate adder with hybrid prediction and error compensation methods

Multistage Latency Adders Architecture Employing Approximate Computing

Asynchronous Ripple Carry Adder based on Area Optimized Early Output Dual-Bit Full Adder

Majority Logic-based Approximate Recording Adders for High-radix Booth Multipliers

Efficient quantum-dot adder optimisation and analysis for future circuits

A Review, Classification, and Comparative Evaluation of Approximate Arithmetic Circuits

Reconfigurable lower-part approximate adder with error-tolerant application: an approach using QCA computing

Asynchronous Early Output Dual-Bit Full Adders Based on Homogeneous and Heterogeneous Delay-Insensitive Data Encoding

Pipelined Carry Look-Ahead Adder

Performance Analysis of High Speed and Low Power Binary Adders