Abstract:Thermally stable high-entropy alloys (HEAs) consisting of a high density of coherent precipitates show a great potential for high-temperature applications. In this work, we systematically investigated the phase stability and coarsening kinetics of L12-type coherent precipitates in a Ni-Co-Fe-Cr-Al-Ti-based HEA isothermally aged at 800, 900 and 1000 °C. Aged microstructures in the grain interiors under this temperature range were essentially dominated by the uniform precipitation of multicomponent L12 (Ni, Co, Fe, Cr)3(Ti, Al)-type precipitates. The coarsening kinetics of these intragranular L12 precipitates were quantitatively determined, which were adequately characterized by the classical Lifshitz-Slyozov-Wagner model. The activation energy for coarsening was determined to be 378 kJ/mol, which is relatively higher than that of conventional Ni or Co-based superalloys, suggesting a slow elemental diffusion in the HEA matrix. More importantly, the heterogeneous precipitation and the associated metastable phase transformation mechanism along grain boundaries (GBs) were carefully analyzed. Localized chemical heterogeneity was identified within the discontinuous L12 phase at the GBs, which thermodynamically destabilizes the L12 structure and encourages the formation of brittle Heusler phase. Finally, we establish a unique duplex-aging strategy that can be efficiently utilized for GB stabilization, by which these detrimental intergranular heterostructures can be greatly eliminated, leading to an exceptional resistance to intermediate-temperature embrittlement, along with enhanced tensile strengths. These findings will not only shed light on the precipitation mechanisms in compositionally complex HEAs but also generate new opportunities to the interfacial design of HEAs for advanced high-temperature applications with superior properties.

Surface degradation mechanisms in precipitation-hardened high-entropy alloys

Surface degradation mechanisms in a eutectic high entropy alloy at microstructural length-scales and correlation with phase-specific work function

Microstructural Features, Corrosion and Wear Behavior of the AlCrFeCoNiCu High-Entropy Alloy, Electrodeposited Coatings, and Subsequent Heat Treatment

Physicomechanical and design characteristics of surface high-entropy alloys

Microstructural Analysis, Corrosion Resistance, and Wear Performance Study of Al0.8FeCoNiCrCu0.5Si0.2 0.8 FeCoNiCrCu 0.5 Si 0.2 High-Entropy Alloy

A eutectic high-entropy alloy coating of novel hard-surface and soft-core structure with improved tribological properties

Phase Structure, Microstructure, Corrosion, and Wear Resistance of Al0.8CrFeCoNiCu0.5 High-Entropy Alloy

Accelerated Corrosion of High Entropy Alloys under Tensile Stress

Microstructure evolution and deformation mechanism of coherent L12-strengthened high-entropy alloy during sliding wear

Control of Nanoscale Precipitation and Elimination of Intermediate-Temperature Embrittlement in Multicomponent High-Entropy Alloys

Microstructural evolution, mechanical and corrosion behavior of an Al7.5Co20.5Fe24Ni24Cr24 high‐entropy alloy

Precipitation Hardening in CoCrFeNi-based High Entropy Alloys

Microstructure, mechanical properties and corrosion resistance of direct energy deposited AlCu 0.25 CoCrFeNi 2.1 high entropy alloy: Tailored by annealing heat treatment

Microstructural and Tribological Behavior of Thermal Spray CrMnFeCoNi High Entropy Alloy Coatings

Microstructure and tribological behaviour of CoCrCuFeTi high entropy alloy reinforced SS304 through friction stir processing

High-Entropy Alloy Coatings Deposited by Thermal Spraying: A Review of Strengthening Mechanisms, Performance Assessments and Perspectives on Future Applications

Surface modification for AlCoCrFeNi2.1 eutectic high-entropy alloy via laser remelting technology and subsequent aging heat treatment

Microstructure and Tribological Behaviour of CrCuFeNiTi High Entropy Alloys

Influence of Heat Treatment on Microstructural, Corrosion and Tribological Behaviour of Electrodeposited AlCoFeMnNiCu High Entropy Alloy Coatings

Improving the high temperature oxidation resistance of high entropy alloy by surface modification

Effect of Microstructure on Wear and Corrosion Performance of Thermally Sprayed AlCoCrFeMo High‐Entropy Alloy Coatings