WAMS-Based Controlled System Separation to Mitigate Cascading Failures in Smart Grid

Kai Sun

DOI: https://doi.org/10.1007/978-3-319-98310-3_12

2018-09-26

Abstract:Catastrophic power blackouts can cause tremendous losses and influence up to tens of millions of people. Since the 1965 Northeast Blackout, many efforts have been made by power industry, but cascading power outages continued to happen. Some recent blackout events are such as the east and west coast blackouts in North America in 2003 and 2011, respectively, the 2006 European blackout and the 2012 Indian blackout events [1–5]. Blackouts are usually caused by cascading failures initiated by, e.g., natural disasters and mis-operations, which are long chains of dependent equipment failures or outages successively weakening the transmission network [6]. If not prevented or mitigated, cascading failures can break the stability and integrity of the system and result in large-area power outages. When cascading failures occur, it is hard for grid operators to manually take a real-time remedial action in a matter of tens of seconds, so automatic system-wide protection and control schemes are vitally important to stop propagation of failures towards wide areas. At present, most existing protection systems lack adaptability and system-wide coordination. Their mechanism is prone to trip equipment under a predefined fault or abnormal condition, which, however, further weakens the transmission network and may speed up propagation of failures. Therefore, effective mitigation of cascading failures requires smart grid be armed with an adaptive, system-wide protection, and control scheme.