Abstract:The thermodynamic and kinetic contributions to an exhaustive extraction of medical devices are studied using the Abraham solvation parameter model and a systematic analysis of the material–solvent interactions, using low-density polyethylene (LDPE) as an example material and extraction solvents of varying polarities. The thermodynamic distribution of extractables compounds between LDPE and solvents of different polarities (water as polar, methanol/ethanol as semipolar, and hexane as nonpolar), used in the exhaustive extraction of medical devices, are first correlated by Abraham solvation parameter model using experimental data. The constructed models are used to derive the partition coefficient between LDPE and various solvents for the representative extractables entities over a wide hydrophobicity range in (the octanol–water partition coefficient) from − 1 to 18. The derived partition coefficients are then used to compute the extraction efficiency by a repeated extraction with five extraction cycles. The ranges of partition coefficient and extraction efficiency by each solvent or three combined solvents allow the assessment of the exhaustive extraction coverage over the hydrophobicity range. In addition to the thermodynamic analysis, the kinetic contribution to the exhaustive extraction by each solvent is also analyzed systematically, starting from the LDPE–solvent interaction, as indicated by a material swelling, to a consequential change in diffusion coefficient, and to a solvent-dependent release rate. The ratios of experimental diffusion coefficients of extractables by hexane extraction to that by alcohol extraction are collected to demonstrate the impact of solvent swelling on the diffusion and release of extractables. The ratios of amounts of extractables released by 24-h and 72-h extraction cycles, recommended by ISO 10993-12 (2021), are also collected to show the influence of cycle time on extraction efficiency. It is concluded from the study that the three solvents of varying polarities are very adequate to extract LDPE to exhaustion over the hydrophobicity range ( from − 1 to 18) or beyond. The extraction by water and methanol/ethanol is a slower "diffusion-controlled" process, compared to a faster "relaxation-controlled" process by hexane. It is also demonstrated that the use of 72-h extraction cycle time has no realistic advantage. The 24-h extraction cycle time is a better choice in achieving an exhaustive extraction efficiently, particularly for extractables with a very slow migration kinetics.

LSER analysis of reactive extraction of Zn and Cu with bis (2-ethylhexyl) phosphate (HDEHP) in six different diluents

Laboratory Evaluation of the Use of Solvent Extraction for Separation of Hydrophobic Organic Contaminants from Surfactant Solutions During Surfactant-Enhanced Aquifer Remediation

Extraction Chemistry of Palladium I. Study on the Mechanism of Synergistic Extraction of Palladium (ii) with 1-Phenyl-3-methyl-4-dichloroacetopyrazolone-5-one and Diphenyl Sulfoxide

Solvent Extraction of Nickel and Zinc from Nitric Acid Solution Using D2EHPA: Experimental and Modeling

Determination and correlation of LLE data for n-hexane, ethyl acetate and different extractants

A study of scatchard-hildebrand solution theory for metal solvent extraction systems

A new model for metal solvent extraction system

Ultrasound/Complexing Agent-Assisted Solvent Extraction Behavior of Zn2+ with D2EHPA from Sulfuric Media Containing Transition and Rare-Earth (Fe, Ni, Cd, La, and Ce) Metal Ions

Solvent Extraction of Manganese and Zinc from Chloride Leach Solution of Spent Zn–C Batteries with DEHPA in Benzene Diluent

Prediction of Aqueous Solubility for 209 Polychlorinated Diphenyl Ethers from Molecular Structural Parameters by DFT Method

Relevance of Surface Adsorption and Aqueous Complexation for the Separation of Co(II), Ni(II), and Fe(III).

General-Model For Aggregation Of Metal-Extractant Complexes In Acidic Organophosphorus Solvent-Extraction Systems

Separation of iron(iii), zinc(ii) and lead(ii) from a choline chloride-ethylene glycol deep eutectic solvent by solvent extraction

Study on Cu(II) extraction process optimization and mechanism from acidic leaching solution using the deep eutectic solvent P507/Menthol

Application of TLSER Method in Predicting the Aqueous Solubility and N-Octanol/water Partition Coefficient of PCBs, PCDDs and PCDFs.

Extraction Kinetics of Lanthanum(iii) by Bis(2-Ethylhexyl) Phosphate and Dimethylheptyl Methyl Phosphate in the Presence of Sulfonated Kerosene Using a Lewis Cell

Correlation of Extractables Transfer from Low-Density Polyethylene into Extraction Solvents with Abraham Solvation Parameter Model and Assessment of Thermodynamic and Kinetic Effects in Achieving Exhaustive Extractions in Chemical Characterization of Medical Devices

Linear solvation energy relationships (LSERs) for robust prediction of partition coefficients between low density polyethylene and water. Part I: Experimental partition coefficients and model calibration

Solvent extraction and separation of light rare earths from chloride media using HDEHP-P350 system

THERMODYNAMICS OF SOLVENT EXTRACTION OF METALS(V) EHEHPA-CoSO4 System

Study on Mg<sup>2+</sup>Removal from Ammonium Dihydrogen Phosphate Solution by Predispersed Solvent Extraction