Abstract:In the last few decades, the concrete industry has been massively expanded with the adoption of various kinds of binding materials. As a substitute to cement and in an effort to relieve ecofriendly difficulties linked with cement creation, the utilization of industrial waste as cementitious material can sharply reduce the amount of trash disposed of in lakes and landfills. With respect to the mechanical properties, durability and thermal behavior, ground-granulated blast-furnace slag (GGBS) delineates a rational way to develop sustainable cement and concrete. Apart from environmental benefits, the replacement of cement by GGBS illustrates an adequate way to mitigate the economic impact. Although many researchers concentrate on utilizing GGBS in concrete production, knowledge is scattered, and additional research is needed to better understand relationships among a wide spectrum of key questions and to more accurately determine these preliminary findings. This work aims to shed some light on the scientific literature focusing on the use and effectiveness of GGBS as an alternative to cement. First and foremost, basic information on GGBS manufacturing and its physical, chemical and hydraulic activity and heat of hydration are thoroughly discussed. In a following step, fresh concrete properties, such as flowability and mechanical strength, are examined. Furthermore, the durability of concrete, such as density, permeability, acid resistance, carbonation depth and dry shrinkage, are also reviewed and interpreted. It can be deduced that the chemical structure of GGBS is parallel to that of cement, as it shows the creditability of being partially integrated and overall suggests an alternative to Ordinary Portland Cement (OPC). On the basis of such adjustments, the mechanical strength of concrete with GGBS has shown an increase, to a certain degree; however, the flowability of concrete has been reduced. In addition, the durability of concrete containing GGBS cement is shown to be superior. The optimum percentage of GGBS is an essential aspect of better performance. Previous studies have suggested different optimum percentages of GGBS varying from 10 to 20%, depending on the source of GGBS, concrete mix design and particle size of GGBS. Finally, the review also presents some basic process improvement tips for future generations to use GGBS in concrete.

Blended Basic Oxygen Furnace (BOF) Slag with Ground Granulated Blast Furnace Slag (GGBFS) as a Pozzolanic Material

Experimental and Statistical Study on the Properties of Basic Oxygen Furnace Slag and Ground Granulated Blast Furnace Slag Based Alkali-Activated Mortar

Co-grinding treatment for developing integrated-properties SCMs from basic oxygen furnace slag and furnace bottom ash: A step toward synthesis advanced SCMs

Utilization of air granulated basic oxygen furnace slag as a binder in belite calcium sulfoaluminate cement: A sustainable alternative

Feasibility of Preparing Steel Slag–Ground Granulated Blast Furnace Slag Cementitious Materials: Synergistic Hydration, Fresh, and Hardened Properties

Compressive Strength and Microstructural Development of Cementitious Mixtures Incorporating Ultrafine Granulated Blast Furnace Slag

Enhancing Mechanical Properties of Expansive Soil Through BOF Slag Stabilization: A Sustainable Alternative to Conventional Methods

Preparation of steel slag-based cementitious materials compounded with GBFS and phosphogypsum: mix design, hydration, and microstructure characteristic

A Cost-Effective Slag-based Mix Activated with Soda Ash and Hydrated Lime: A Pilot Study

Effect of blended steel slag–GBFS mineral admixture on hydration and strength of cement

Utilization of ground granulated blast-furnace slag and electrolytic manganese residue as a low-carbon cementitious material

Blast furnace slag properties at different grinding times and its effect on foam concrete properties

Preparation and Characterization of Low-Carbon Cementitious Materials Based on Soda-Residue-Activated Ground Granulated Blast-Furnace Slag: A Case Study on Cemented Paste Backfills

Utilization of carbide slag-granulated blast furnace slag system by wet grinding as low carbon cementitious materials

The hydration properties of ultra-fine ground granulated blast-furnace slag cement with a low water-to-binder ratio

Strength and hydration properties of reactive MgO-activated ground granulated blastfurnace slag paste

A Comprehensive Review on the Ground Granulated Blast Furnace Slag (GGBS) in Concrete Production

Comparing Properties of Concrete Containing Electric Arc Furnace Slag and Granulated Blast Furnace Slag

Stabilization of High Sulfate-Saline Soil with Lime, Ground Granulated Blast Furnace Slag (GGBFS), and Basic Oxygen Furnace Slag (BOFS)

Activation of Blast Furnace Slag with CFB Fly Ash as a Supplementary Binder Material: Hydration Products and Effects of Sulfate Attack

Evaluation of compressive strength and chloride permeability of cement-based materials with high-volume compound mineral admixtures