Abstract:Based on an electromagnetic induction heating system that was recently developed in a previous work, an orthogonal test with three elements and nine levels was carried out to improve the heating effect of the system. This was intended to achieve a balance between the heating rate and temperature uniformity, where the electrochemical and thermal behaviors of the heated lithium-ion battery could be characterized by a high-accuracy electrochemical–thermal coupling model. This was validated against constant-current discharge and HPPC test data at room temperature and different low temperatures. Under the optimal parameter combination that was found in the orthogonal test, the battery temperature could rise to 293.15 K from 243.15 K in 494 s, with a maximum temperature rise rate of 0.133 K·s−1. The temperature difference after heating reached 4.21 K, which resulted from the heat conductivity of the battery material due to the skin depth of the battery shell and the material properties inside the battery. Due to the internal resistance, which decreased to no more than a quarter of the low-temperature level, both the usable energy and pulse power were increased more than 2.5 and 3 times, respectively. The enhancement of the energy output ability could provide a greater cruise range and improved dynamics for electric vehicles. The capacity calibration results obtained during the heating cycles indicated that there was only a 3.61% reduction in capacity retention after 120 repetitive heating cycles, which was 0.008 Ah below the normal cycle at 293.15 K, even compared with room-temperature capacity calibration, thus reducing the effect on the battery's lifetime. Therefore, the electromagnetic induction heating system with a heating strategy could achieve a beneficial compromise between the temperature rise behavior, cycle lifetime, and working ability, indicating considerable potential for the optimization of the heating effect.

Experimental Study on the Mechanism of Extra-Heat in High-Frequency Preheating of Lithium-Ion Battery at Low Temperature

Experimental study on the mechanism of frequency-dependent heat in AC preheating of lithium-ion battery at low temperature

Thermal Characteristics Investigation of Lithium-Ion Battery Under High-Frequency AC Excitation in Low-Temperature Environment

Internal heating of lithium-ion batteries using alternating current based on the heat generation model in frequency domain

Impact of Low Temperature Exposure on Lithium-Ion Batteries: A Multi-Scale Study of Performance Degradation, Predictive Signals and Underlying Mechanisms

Simulation Study on Heat Generation Characteristics of Lithium-Ion Battery Aging Process

Temperature-Adaptive Alternating Current Preheating of Lithium-Ion Batteries with Lithium Deposition Prevention

High-Frequency AC Heating Strategy of Electric Vehicle Power Battery Pack in Low-Temperature Environment

Frequency varying heating strategy for lithium-ion battery rapid preheating under subzero temperature considering the limitation of on-board current

A variable-frequency self-heating strategy for lithium-ion batteries based on an electrochemical impedance-thermal coupling model applicable to a wide frequency range

Research on the Improvement of Lithium-Ion Battery Performance at Low Temperatures Based on Electromagnetic Induction Heating Technology

Preheating strategy of variable‐frequency pulse for lithium battery in cold weather

Investigation of novel pulse preheating strategies for lithium-ion batteries at subzero temperature based on a multi-level CFD platform

An optimized internal heating strategy based on bidirectional pulsed current for lithium-ion battery at low temperature

Research on the heating effect evaluation of the electromagnetic induction heating system at low temperature based on the electrochemical-thermal coupling model

Research on low temperature internal AC heating device for lithium-ion battery

Frequency-Variable Resonant Self-Heating Technique for Lithium-Ion Batteries at Low Temperature

An optimal internal-heating strategy for lithium-ion batteries at low temperature considering both heating time and lifetime reduction

Orthogonal design based pulse preheating strategy for cold lithium-ion batteries

Research on the Optimization of the Heating Effect of Lithium-Ion Batteries at a Low Temperature Based on an Electromagnetic Induction Heating System

A low temperature preheating strategy with optimized fuzzy controller for lithium-ion batteries