Abstract:An in‐depth investigation of quasi‐2D Rudlesden–Popper perovskite film formation process and a successful strategy for its control is presented. The confined crystallization and phase reorganization by co‐additives in the quasi‐2D formamidinium‐based perovskite film facilitate the transition from a low‐n phase to a (111) oriented high‐n phase. The electron trap density in the layer is significantly reduced and the solar cell performance is boosted. The incorporation of large organic ammonium ions renders the crystallization dynamics and layer formation process of halide perovskites complex, difficult to control, and leads to problems of suppressed charge transport with the formation of tiny‐sized grains. In this paper, the use of methylammonium chloride (MACl) and an excess of PbI2 is introduced as a co‐additives in the precursor solution for the control of phenylmethylammonium or benzylammonium (PMA+ spacer) and formamidinium (FA+)‐based quasi‐2D PMA2FAn−1PbnI3n+1 (n = 5) perovskite layers formation. By this method, the morphology of the layer, the inner phase distribution, and the charge transport properties are improved. By employing glow discharge‐optical emission spectroscopy (GD‐OES) and other techniques, it is revealed that the quasi‐2D perovskites prepared in the presence of co‐additives exhibit uniform removal dynamics of the solvent across the film. Furthermore, the grain growth mode, upon thermal annealing, is lateral. It results in large, monolithic grains with low‐trap state density and excellent substrate coverage. Particularly, co‐additives improve the cations dispersion upon the crystallization process, thus suppressing the low‐n phase formed through the aggregation of spacer cations and accelerating the formation of the high‐n phase.

Ambient-Stable Cubic-Phase Hybrid Perovskite Reaching the Shockley–Queisser Fill Factor Limit via Inorganic Additive-Assisted Process

Enhanced Crystallization and Optimized Morphology of Perovskite through Doping Indium-Based Metal-Organic Assembly: Achieving Significant Solar Cell Efficiency Enhancements

Phase Engineering of Perovskite Materials for High-Efficiency Solar Cells: Rapid Conversion of CH3NH3PbI3 to Phase-Pure CH3NH3PbCl3 Via Hydrochloric Acid Vapor Annealing Post-Treatment

A Small‐Molecule “charge Driver” Enables Perovskite Quantum Dot Solar Cells with Efficiency Approaching 13%

Polymer-modified halide perovskite films for efficient and stable planar heterojunction solar cells.

Hydrazinium Salt as Additive to Improve Film Morphology and Carrier Lifetime for High-Efficiency Planar-Heterojunction Perovskite Solar Cells via One-step Method.

Synergistic Improvement of Perovskite Film Quality for Efficient Solar Cells Via Multiple Chloride Salt Additives

Tailored Phase Conversion under Conjugated Polymer Enables Thermally Stable Perovskite Solar Cells with Efficiency Exceeding 21.

Controllable Perovskite Crystallization via Antisolvent Technique Using Chloride Additives for Highly Efficient Planar Perovskite Solar Cells

2D Halide Perovskite Phase Formation Dynamics and Their Regulation by Co‐Additives for Efficient Solar Cells

Hydrogen-bond-bridged intermediate for perovskite solar cells with enhanced efficiency and stability

Octahedral Tilt Enables Efficient and Stable Fully Vapor‐Deposited Perovskite/Silicon Tandem Cells

Multifunctional Reductive Molecular Modulator toward Efficient and Stable Perovskite Solar Cells

Heterojunction Modification for Highly Efficient Organic - Inorganic Perovskite Solar Cells

Chloride‐Based Additive Engineering For Efficient and Stable Wide‐Bandgap Perovskite Solar Cells

Orientated crystallization of FA-based perovskite via hydrogen-bonded polymer network for efficient and stable solar cells

Phase-heterojunction all-inorganic perovskite solar cells surpassing 21.5% efficiency

Ternary Halide Perovskites for Highly Efficient Solution-Processed Hybrid Solar Cells

Mitigating lattice strain and phase segregation of mixed-halide perovskite films via dual chloride additive strategy toward highly efficient and stable perovskite solar cells

Ultra-uniform perovskite crystals formed in the presence of tetrabutylammonium bistriflimide afford efficient and stable perovskite solar cells

Suppressing halide phase segregation in wide-bandgap perovskite film by co-doping strategy for high-performance and stable perovskite solar cells