Abstract:Daily use of passenger vehicles leads to considerable emission of volatile organic compounds (VOCs), which are key precursors to the ground-level ozone pollution. While evaporative and tailpipe emission of VOCs from the passenger vehicles can be eliminated largely, or even completely, by electrification, VOCs emission from the use of coatings in auto-repair is unavoidable and has long been ignored. Here, we present for the first time, to the best of our knowledge, a comprehensive investigation on the emission factors and process-specified characteristics of VOCs from auto-repair painting, based on field measurements over 15 representative auto-repair workshops in the Pearl-River-Delta area, China. Replacement of solvent-borne coatings with water-borne counterparts, which was only achieved partially in the Basecoat step but not in the Putty, Primer and Clearcoat steps, could reduce the per automobile VOCs emission from 756.5 to 489.6 g and the per automobile ozone formation potential (OFP) from 2776.5 to 1666.4 g. Implementation of exhaust after-treatment led to a further reduction of the per automobile VOCs emission to 340.9 g, which is still ca. 42% higher than that from the state-of-art painting processes for the manufacture of passenger vehicles. According to the analysis of VOCs compositions, the Putty process was dominated by the emission of styrene, while Primer, Basecoat (solvent-borne) and Clearcoat steps were all characterized by the emission of n-butyl acetate and xylenes. By contrast, water-borne Basecoat step showed a prominent emission of n-amyl alcohol. Notably, for the full painting process to repair an automobile, n-butyl acetate emerged as the most abundant species in the VOCs emission, whereas xylenes contributed most significantly to the OFP. Scenario analysis suggested that reducing VOCs contents in the coatings, as well as improving the after-treatment efficiency, were highly potential solutions for effective reduction of VOCs emission from auto-repair. Our study contributes to an update of industrial inventories of VOCs emission, and may provide valuable insights for reducing VOCs emission and OFPs from the auto-repair industry.

Research and Application of VOCs Treatment in Petroleum Refinery Industry Based on LDAR

Reduction of fugitive VOC emissions using leak detection and repair (LDAR) in a petroleum refinery of Pearl River Delta, China

High-performance Virtual Sensors Array Based on a Single-chip FBAR for Volatile Organic Compounds (vocs) Detection and Classification

Research on Accounting and Detection of Volatile Organic Compounds from a Typical Petroleum Refinery in Hebei, North China

Research of VOCs Clearance Device Based on Adsorption Catalysis Techniques

Research on Volatile Organic Compounds Leaking Status of Petroleum Refining Units

VOC emissions from refueling process in China

Historical Volatile Organic Compounds Emission Performance and Reduction Potentials in China's Petroleum Refining Industry

Detection and treatment of VOCs in the food industry

A review of whole-process control of industrial volatile organic compounds in China

Alternate programs to control leaks of volatile organic compounds (VOC) from petroleum refining equipment

Comprehensive Screening and Priority Ranking of Volatile Organic Compounds in Daliao River, China

Emission characteristics, risk assessment and scale effective control of VOCs from automobile repair industry in Beijing

Advances in volatile organic pollutant capture and adsorption degradation treatment technologies

Advanced Technologies for Volatile Organic Compound (VOC) Emission Treatment: An Overview

A Review of the Treatment Techniques of VOC

Advances in Adsorption, Absorption, and Catalytic Materials for VOCs Generated in Typical Industries

Industrial VOCs Waste Gas Treatment Technology and Its Application Practice

Utilizing a optimized method for evaluating vapor recovery equipment control efficiency and estimating evaporative VOC emissions from urban oil depots via an extensive survey

Assessment of volatile organic pollution control technologies in automotive industry

Process-specified emission factors and characteristics of VOCs from the auto-repair painting industry