Abstract:Cylindrical cells are gaining market volume in the production of batteries for electric vehicles among others due to high flexibility with regard to space utilization. However, the internal winding structure can be prone for inhomogeneities regarding current distribution, electrode degradation, and mechanical stress. In this study, 27 cylindrical SDI INR21700 50E cells with a nickel-rich NCA cathode and a Si/C composite anode were subjected to five individual aging procedures. Computed tomography scans were conducted at 100 %, 90 % and 80 % capacity retention to investigate internal swelling and deformation of the jelly roll non-destructively. The cells were disassembled at 80 % capacity retention for post-mortem analysis on coin half-cells harvested from different locations of the jelly roll to quantify inhomogeneous aging and electrode swelling. Increased cycle depth and discharge current exacerbated inhomogeneous degradation across the electrode length. In comparison to 860 equivalent full cycles (EFC) at 0.5 C and 100 % cycle depth, limiting the SoC range between 20 % to 80 % at 25 °C increased cycle life to 4150 EFC despite a high discharge current of 2 C. Minimizing utilization of the silicon content and avoiding lithium plating, the cathode and the anode retained around 4 % and 2 % increased capacity at the inner winding area in comparison to the outer area, presumably due to increased mechanical pressure at the inner area. At the same time, the inner area displayed reduced swelling, further suggesting increased mechanical pressure at the inner area. Overall, the irreversible swelling measured 6 % to 16 % and 8 % to 20 % for the cathodes and the anodes after disassembly, depending on the operating conditions and the location on the electrode. To prevent non-linear capacity fade and deformation of the jelly roll, the results suggest to restrict utilization of the silicon content and to avoid high charging currents at low temperature.

Energy Density of Cylindrical Li-Ion Cells: A Comparison of Commercial 18650 to the 21700 Cells

Design, Properties, and Manufacturing of Cylindrical Li-Ion Battery Cells—A Generic Overview

Electro-Thermal Modeling of a Hollow Structure Design of Cylindrical Lithium-Ion Battery

A Novel Heat Generation Acquisition Method of Cylindrical Battery Based on Core and Surface Temperature Measurements

A comparative study on safety and electrochemical characteristics of cylindrical lithium-ion cells with various formats

Thermal-electrochemical parameters of a high energy lithium-ion cylindrical battery

Effects of Particle Size Distribution on Compacted Density of Lithium Iron Phosphate 18650 Battery

Overview of Battery Impedance Modeling Including Detailed State-of-the-Art Cylindrical 18650 Lithium-Ion Battery Cell Comparisons

Thermal management of 21700 Li-ion battery packs: Experimental and numerical investigations

Study on the thermal interaction and heat dissipation of cylindrical Lithium-Ion Battery cells

Identifying the origin of inhomogeneous degradation and irreversible swelling inside cylindrical 21700 high-energy lithium-ion cells

Thermal Behaviour of a Cylindrical Li-Ion Battery

Comparative Study on the Electrochemical Properties of Cylindrical and Pouch-Type Lithium Ion Battery

In-situ obtained internal strain and pressure of the cylindrical Li-ion battery cell with silicon-graphite negative electrodes

Comparison of Modeling Predictions with Experimental Data from Plastic Lithium Ion Cells

Influence of Breathing and Swelling on the Jelly-Roll Case Gap of Cylindrical Lithium-Ion Battery Cells

Temperature field evolution of cylindrical battery: In-situ visualizing experiments and high fidelity internal morphology simulations

In-situ investigations of the inhomogeneous strain on the steel case of 18650 silicon/graphite lithium-ion cells

Impact of Current Collector Design and Cooling Topology on Fast Charging of Cylindrical Lithium-Ion Batteries

Electrochemical Non-Destructive Analysis of Commercial 18650 Cells

Homogenized mechanical properties for the jellyroll of cylindrical Lithium-ion cells