Abstract:Ventilation and air distribution systems for cleanrooms in electronic industry have been overdesigned. Reducing the air supply volume of fan filter units (FFUs) is considered an energy saving measure. However, little is known about the particle removal performances after reduction in air supply volume. In this study, experiments were conducted in a chamber to investigate the effects of reducing air supply volume on the characteristic of particle distribution. The experiments were based on three FFU speed ratios (80%, 50%, and 40%) and four particle source locations (source in the subzone with and without an FFU at the heights of 1.5 m and 1.0 m) at two FFU area ratios (50% and 25%). The results were analyzed using the dimensionless particle concentrations (with respect to ideal mixing condition) in sixteen subzones within the experimental region. It was concluded that (1) the containment effect of air distribution on particle lateral dispersion was weakened with the decrease of air supply volume for FFU area ratios of both 50% and 25%; (2) most subzones have been well protected at an FFU area ratio of 50% (with dimensionless concentrations far below 0.2) regardless of the source location, and at an FFU area ratio of 25% (with dimensionless concentrations far below 0.5) for the particle source under an FFU supply airflow. However, the containment effect has been poor at an FFU area ratio of 25% for the particle source not under an FFU supply airflow regardless of the air supply volume; (3) the working face at a height of 1.0 m was slightly more affected for a source height of 1.5 m compared with a source height of 1.0 m at an FFU area ratio of 50%, while there was no significant difference in the particle removal for both source heights at an FFU area ratio of 25%; and (4) the air supply volume could be reduced by 46.7% (0.2 as the critical value) and 43.8% (0.5 as the critical value), respectively for FFU area ratios of 50% and 25% from the perspective of air distribution effectiveness. This study improves the understanding of characteristics of reduced airflow in cleanrooms.

Improvement of Airflow Distribution and Contamination Control for a Biotech Cleanroom

Numerical Comparison of the Efficiency of Mixing Ventilation and Impinging Jet Ventilation for Exhaled Particle Removal in a Model Intensive Care Unit

Regional flow motion and heat energy balance analysis of a 10,000 class pharmaceutical cleanroom with secondary return air conditioning system

Performance Analysis and Improvement of Air Filtration and Ventilation Process in Semiconductor Clean Air-Conditioning System

Indoor Airflow and Pollutant Spread Inside the Cleanroom with Micro-Porous Supplying Panel and Different Ventilation Schemes: Analytical, Numerical and Experimental Investigations

Full-scale evaluation of FFU configurations in an optical cleanroom injection molding for improving thermal performance and contaminant removal

Impact of the Speed of Airflow in a Cleanroom on the Degree of Air Pollution

Field Test of Pharmaceutical Cleanroom Cleanliness Subject to Multiple Disturbance Factors

Experimental Characterization of Particle Distribution During the Process of Reducing the Air Supply Volume in an Electronic Industry Cleanroom

Capturing Energy-Saving Opportunities in Air-Supply System for Cleanroom with Non-Unidirectional Airflow

Experimental Investigation of Particle Dispersion in Cleanrooms of Electronic Industry under Different Area Ratios and Speeds of Fan Filter Units

Dynamic emission rates of human activity in biological cleanrooms

Investigation on the contaminant distribution with improved ventilation system in hospital isolation rooms: Effect of supply and exhaust air diffuser configurations

Experimental and CFD Airflow Studies of a Cleanroom with Special Respect to Air Supply Inlets

CFD Investigation of Ventilation Strategies to Remove Contaminants from a Hospital Room

Performance analysis of air conditioning system and airflow simulation in an operating theater

Evaluation and Improvement of Ventilation System Inside Low-Cost Automation Line to Reduce Particle Contamination

Theoretical expression for clean air volume in cleanrooms with non-uniform environments

Development of ventilation design strategy for effective removal of pollutant in the isolation room of a hospital

Analysis and Experiments on the Characteristics of Airflow and the Air Cleanliness Protection Region under Fan Filter Units in Cleanrooms

Simulation on interface airflow by occupant's traffic flow through operating room