Abstract:Abstract The separation of two systems containing minimum boiling azeotropes (acetone-methanol and tetrahydrofuran (THF)-water) was performed using extractive distillation with a heavy boiling mixed entrainer consisting of two compounds. The entrainer constituents did not form new azeotropes with each other and with the components of the original mixture. An analysis of the mixed entrainer influence on the vapor-liquid equilibrium (VLE) and relative volatility provides an understanding of the cases in which the separation by extractive distillation (ED) in the presence of the mixed entrainer revealed energy benefits over their individual constituents. New results for application of the mixed entrainer monoethanolamine (MEA)-ethylene glycol (EG) and dimethylsulphoxide (DMSO)-glycerol for the separation of THF-water and acetone-methanol, respectively, are presented for the first time. The individual selective agents were chosen from the efficient entrainers discussed in the literature. The calculations were performed using the platform Aspen Plus 7.3. Different extractive distillation flowsheets are provided for the zeotropic mixed agents, viz. with two or three columns. For the ED of the binary mixtures investigated, the structures of the different separation schemes, the operating parameters of the columns, and the energy consumptions are presented and compared. The application of the mixed entrainer MEA-EG fed into the ED column with pre-mixing can be recommended, providing up to 1.7 % of energy saving for acetone-methanol separation. In the case of THF-water, the mixed entrainer DMSO-glycerol provides 0.8 % of energy saving. The separate inputs of the individual constituents of the mixed entrainer led to a significant increase in the energy consumptions of the flowsheet because of the third regeneration column, hence this flowsheet cannot be recommended for use in the separation of both mixtures.

ENTRAINER SELECTION FOR SEPARATION OF AZEOTROPIC MIXTURES BY DISTILLATION METHODS

Separation of Azeotropic Mixtures (ethanol and Water) Enhanced by Deep Eutectic Solvents

Systematic design of an extractive distillation for maximum‐boiling azeotropes with heavy entrainers

Effect of Entrainer Thermodynamic Properties on the Separation of Ternary Mixtures Containing Two Minimum Boiling Azeotropes by Extractive Distillation

Conceptual Design of Non-Ideal Mixture Separation with Light Entrainers

Separation of Azeotropic Mixture (2, 2, 3, 3-Tetrafluoro-1-propanol + Water) by Extractive Distillation: Entrainers Selection and Vapour-Liquid Equilibrium Measurements

Design of extractive distillation process with mixed entrainer

Azeotropic Distillation: A Review of Mathematical Models

SEPARATION OF ETHANOL-WATER AZEOTROPE MIXTURES USING EXTRACTIVE DISTILLATION METHOD

The Impact of Feed Composition on Entrainer Selection in the Extractive Distillation Process

Separation of the Mixture 2-Propanol + Water by Heterogeneous Azeotropic Distillation with Isooctane as an Entrainer

Deep eutectic solvents as entrainers in extractive distillation – A review

Synthesis of Distillation Sequences for Separating Multicomponent Azeotropic Mixtures

From Batch to Continuous Extractive Distillation Using Thermodynamic Insight: Class 1.0&#x2013;2 with a Heavy Entrainer

Study on the Separation of Binary Azeotropic Mixtures by Continuous Extractive Distillation

Extension of Thermodynamic Insights on Batch Extractive Distillation to Continuous Operation. 1. Azeotropic Mixtures with a Heavy Entrainer

Automatic Design of Extractive Distillation Sequence for a Multicomponent Azeotropic System

Separation of the Azeotropic Mixture Methanol and Toluene Using Extractive Distillation: Entrainer Determination, Vapor–Liquid Equilibrium Measurement, and Modeling

Journal review. Azeotropic distillation

Thermodynamic Topological Analysis of Extractive Distillation of Maximum Boiling Azeotropes

Optimization of Pre-Concentration, Entrainer Recycle and Pressure Selection for the Extractive Distillation of Acetonitrile-Water with Ethylene Glycol