Abstract:In order to solve the serious dust pollution problem in mining and loading process of burnt rock open-pit coal mines, a dust suppression technology was proposed to investigate the compound dust suppressant with four functions of wetting, coagulation, moisture absorption, and moisture retention, and improve the hydrophilicity and dust suppression efficiency of burnt rock. Through single-factor experiments, four functional reagents were selected. Determined the best mass concentration ratio by orthogonal test, and the optimum dilution ratio was determined through the contact angle verification test. Fourier infrared spectroscopy (FTIR) analysis of the functional group of the compound dust suppressant showed that the hydrophilic functional group was increased. The scanning electron microscopy (SEM) revealed that the dust surface formed a dense film after spraying the dust suppressant, and the effect of fine dust coagulation was obvious. The results of the wind tunnel simulation test revealed that the inhibitory efficiency of the compound dust suppressant on total dust and respirable dust could reach up to 81.90% and 87.06%, respectively, under a wind speed of 4.00 m/s. The field test data for mining and loading spray dust suppression in open-pit coal mines revealed that the dust suppression efficiency of whole dust and respirable dust was greater than 85.70%, which indicates that the compound dust suppressant can effectively suppress the dust of burnt rock, and effectively improve the working environment quality of mining and loading in open-pit coal mines.Implications: Open-pit coal mines located in arid areas will produce a large amount of dust during the mining and loading process, which will cause serious air pollution. In particular, the burnt rock is highly hydrophobic, and it is difficult to achieve effective removal by water spraying. The open-pit coal mine face advances faster and has strong mobility, There are few researches on dust reduction in this link. Therefore, in this study, in order to improve the dust suppression efficiency in the mining and loading process, a compound dust suppressant to improve the hydrophilicity of the burnt rock was developed through single-factor experiments and orthogonal experiments. Microscopic analysis using FTIR and SEM confirmed the wetting and coagulation effect of the dust suppressant. Then designed a spray dust suppression program for the mining and loading process and achieved good results.

New technology and practice of dust pollution control with foam jet in underground mines

The Application of the Foam Technology to the Dust Control for Reducing the Dust Injury of Coal Mines

Investigation on the performance and application of a new design of foam generator used for fire extinguishment in underground coal mines

Novel approach for extinguishing large-scale coal fires using gas-liquid foams in open pit mines

Investigation on the design of atomization device for coal dust suppression in underground roadways

Innovation and practice for the prevention and control technologies of coal dust in Shandong coal mine

Experimental Study and Implementation of A Novel Internal Foam Spraying System for Roadheaders

Numerical Simulation of Air Entrainment Performance of a Foam Generator Used for Dust Control in Coal Mines

Research on negative pressure jet dust-removal water curtain technology for coal mine cleaner production

Foaming agent self-suction properties of a jet-type foam preparation device used in mine dust suppression

Study on dust control technology of mobile spray combined with full-section fog curtain in return airway of header working face

A research on dust suppression mechanism and application technology in mining and loading process of burnt rock open pit coal mines

Application of foam–gel technology for suppressing coal spontaneous combustion in coal mines

A new method to improve the pulse-jet cleaning performance of filter cartridges and its application to dust control in underground coal mines

Experimental study on atomization characteristics and dust-reduction performance of four common types of pressure nozzles in underground coal mines

A Study on Dust-Control Technology Used for Large Mining Heights Based on the Optimization Design of a Tracking Spray Nozzle

Underground Intelligent Dry Dust Collector in the Coal Mine

Development of a novel wind-assisted centralized spraying dedusting device for dust suppression in a fully mechanized mining face

Study on coal dust diffusion law and new pneumatic spiral spray dedusting technology at transfer point of mine cross roadway.

Study of integrated vortex ventilation and dust removal system in mechanized excavation face

Dust arising mechanism and dust reduction technology of open-pit coal mine using water and sediment reduction effect