Abstract:_ This article, written by JPT Technology Editor Chris Carpenter, contains highlights of paper SPE 211546, “Intelligent Pipe: A Multiannuli Monitoring Solution,” by Francois-Xavier Bulard, Vallourec; Emmanuel Tavernier, OpenField Technology; and Lucas Kling, Vallourec. The paper has not been peer reviewed. _ The authors describe a multiannular monitoring solution that measures pressure and temperature for each well annulus. These key parameters are captured by sensors based on microelectromechanical-system technology. A transmission methodology is used that allows power supply and data retrieval even for annuli beyond the B annulus. All electronic elements of the solution will be qualified through an international recommendation protocol [Advanced Well Equipment Standards (AWES)] that consists of a series of mechanical and long-term tests to ensure that the system will survive for 20 years at 125°C. The solution could be used in all storage applications, especially those related to the energy transition. Introduction The initial goal of the intelligent-pipe solution was to add functionality to tubulars by embedding miniaturized sensors into the pipe body. The secondary objective was to monitor the pipe’s environment to properly characterize well loads and compare them to its strength resistance. The main application of the solution was then to monitor annulus conditions in real time during the whole life of the well and to anticipate any leakage or annular-pressure-buildup issue that could not be monitored currently on subsea wells. A tubular design was developed to incorporate pressure and temperature sensors without affecting the integrity of the pipe. The design was verified by a testing protocol performed by an in-house testing laboratory. This protocol consisted, first, of finite-element analysis (FEA) performed on different tubular designs with the objective of optimizing the different shapes of the grooves created to incorporate the sensors. The second steps included physical tests performed on a specimen inside test frames that confirmed that the tubular integrity was not affected after several pressure and axial load cycles, even when applying maximum pipe-resistance loads. This mechanical test qualification demonstrated that the monitoring mandrel was able to withstand the constraints observed in a well. The qualification level achieved was the same as that achieved on the premium pipe connection. Much of the complete paper is dedicated to the development of the permanent solution; this synopsis focuses on the system’s pilot deployment and its global system qualification. First Deployment in a Deepwater Subsea Well The operator’s objective was to monitor several annuli of a subsea well to determine the effect of completion operations. This characterization was completed before the well-production phase. The main outputs of the pilot were annuli trapped pressure and temperature. The pilot was defined initially in two stages. The first was to monitor the B and C annuli conditions (pressure and temperature) immediately after casing deployment. The second was to do so again after running completions and various stimulation operations. A secondary objective was to retrieve historical sensor data, pressure, and temperature records from the time of sensor deployment to data-retrieval operation.

State of the Art Membrane Nitrogen Technology Enables Remote and Large-Volume Pipeline Leak Testing

Experimental study on hydrogen pipeline leakage: Negative pressure wave characteristics and inline detection method

Efficient Utilization of N2 During Commissioning and Startup

Pressure test method of safety assessment on existed submarine pipeline

Pros and cons of different Nitrogen Removal Unit (NRU) technology

Design and Application of Vacuum Test Bench for LNG Cryogenic Pipeline

Roadmap for Recommended Guidelines of Leak Detection of Subsea Pipelines

Miscible N2 EOR in a Giant High Temperature Complex Carbonate Reservoir

An analysis of pipeline technology for LNG installations

Pipeline In-Line Inspection Method, Instrumentation and Data Management

Methane/nitrogen separation through pressure swing adsorption process from nitrogen-rich streams

Review and analysis of pipeline leak detection methods

A Novel Hybrid Internal Pipeline Leak Detection and Location System Based on Modified Real-Time Transient Modelling

Utilizing Intelligent Oilfield Technology and Production Chemicals to Solve Operational Challenges and Increase Production

Recent Advances in Pipeline Monitoring and Oil Leakage Detection Technologies: Principles and Approaches

Multiannuli Solution Uses Intelligent Pipe for Real-Time Monitoring

Main aspects of liquefied natural gas process line thermal and hydraulic calculations

Pipeline Integrity: The Use of Multiple Technology In-Line Inspection Tool

Securing offshore resources development: A mathematical investigation into gas leakage in long-distance flexible pipes

Leak Detection System for Long-Distance Onshore and Offshore Gas Pipeline Using Acoustic Emission Technology. A Review